Schwinn 270i Recumbent Bike Assembly and Owner's Manual
Schwinn 270i Recumbent Bike Manual
View all Schwinn 270i Recumbent Bike manuals
Add to My Manuals
Save this manual to your list of manuals |
Schwinn 270i Recumbent Bike manual content summary:
- Schwinn 270i Recumbent Bike | Assembly and Owner's Manual - Page 1
270i This product is compliant with the applicable CE requirements. ASSEMBLY MANUAL / OWNER'S MANUAL - Schwinn 270i Recumbent Bike | Assembly and Owner's Manual - Page 2
26 Quick Start Program 27 User Profiles 27 Pausing or Stopping 32 Results / Cool Down Mode 32 GOAL TRACK Statistics 33 Console Service Mode 35 Maintenance 36 Maintenance Parts 37 Troubleshooting 39 To validate warranty support, keep the original proof of purchase - Schwinn 270i Recumbent Bike | Assembly and Owner's Manual - Page 3
. Failure to use genuine replacement parts can cause a risk to users, keep the machine from operating correctly and void the warranty. • Do not use until the machine has been fully assembled and inspected for correct performance in accordance with the Manual. • Read and understand the complete - Schwinn 270i Recumbent Bike | Assembly and Owner's Manual - Page 4
to use, read and understand the Owner's Manual. • Injury or death is possible if Caution is not used while using this machine. • The maximum user weight for this machine is 300 ne pas vous infliger de graves blessures. • Cette machine supporte un poids maximal de 300lbs. (136kg). • Remplacez - Schwinn 270i Recumbent Bike | Assembly and Owner's Manual - Page 5
52.5" ) 67.5 cm ( 26.6" ) Maximum User Weight: 136 kg ( 300 lbs. ) Machine workout area of a minimum 189.5 cm x 280.5 cm ( 74.6" x 110.5" ). Basic Assembly Tips Follow these basic points when you assemble your machine: • Read and understand the "Important Safety Instructions" before assembly - Schwinn 270i Recumbent Bike | Assembly and Owner's Manual - Page 6
PARTS 17 16 15 14 13 12 2 1 5 6 7 3 4 9 11 8 10 Item Qty Description 1 1 Console 2 1 Water Bottle Holder 3 1 Seat Back 4 1 Seat Cover 5 1 Seat Frame Assembly 6 1 Seat Bottom 7 1 Seat Adjustment Handle 8 1 Rear Stabilizer 9 1 Frame Item Qty Description 10 1 AC Adapter - Schwinn 270i Recumbent Bike | Assembly and Owner's Manual - Page 7
HARDWARE / TOOLs A B C D Item Qty Description A 8 Button Head Hex Screw, M8x20 B 10 Button Head Hex Screw, M6x12 C 4 Flat Washer, M8 D 8 Lock Washer, M8 E 10 Flat Washer, M6 E F G H I J Item Qty Description F 2 Phillips Head Screw, M5x12 G 14 Lock Washer, M6 H 4 Curved - Schwinn 270i Recumbent Bike | Assembly and Owner's Manual - Page 8
ASSEMBLY 1. Attach StabilizerS to Frame Note: H ardware is pre-installed and not on the Hardware Card. * 6mm X2 * * * 6mm X2 * * * 8 9 12 8 - Schwinn 270i Recumbent Bike | Assembly and Owner's Manual - Page 9
2. Attach the Seat Frame Assembly to the Seat Rail NOTICE: Do not crimp the Heart Rate Cable. Once all hardware has been inserted, be sure to fully tighten it. 6mm X4 A D C 5 X2 B GE 4mm 9 - Schwinn 270i Recumbent Bike | Assembly and Owner's Manual - Page 10
3. Attach Seat Pads to Seat Frame Assembly 3 6 X8 E G B 4mm X4 H G I #2 10 - Schwinn 270i Recumbent Bike | Assembly and Owner's Manual - Page 11
4. Attach Cover to Frame Assembly 4 5. Attach Seat Adjustment Handle to Frame Assembly 7 11 - Schwinn 270i Recumbent Bike | Assembly and Owner's Manual - Page 12
6. Connect the Cables and Attach the Console Mast to Frame Assembly NOTICE: Do not crimp Console Cables. 16 14 X4 A 6mm J D 15 12 - Schwinn 270i Recumbent Bike | Assembly and Owner's Manual - Page 13
NOTICE: Do not crimp the cable. Note: H ardware is pre-installed and not on the Hardware Card. * 1 X4 #2 8. Connect Cables and Attach Console to Frame Assembly NOTICE: Align the clips on the cable connectors and make sure the connectors lock. Do not crimp cables. X4 13 - Schwinn 270i Recumbent Bike | Assembly and Owner's Manual - Page 14
9. Attach Pedals to Frame Assembly NOTICE: The Left Pedal is reverse-threaded. Be sure to attach Pedals on the proper side of the Bike. Orientation is based from a seated position on the bike. The Left Pedal has an "L", the Right Pedal an "R". 13 11 14 - Schwinn 270i Recumbent Bike | Assembly and Owner's Manual - Page 15
10. Attach Water Bottle Holder to Frame Assembly #2 X2 2 F 15 - Schwinn 270i Recumbent Bike | Assembly and Owner's Manual - Page 16
to ensure that all hardware is tight and components are properly assembled. Be sure to record the serial number in the field provided at the front of this manual. Do not use until the machine has been fully assembled and inspected for correct performance in accordance with the Owner's Manual. 16 - Schwinn 270i Recumbent Bike | Assembly and Owner's Manual - Page 17
carefully lift the machine onto the transport rollers. 3. Push the machine into position. 4. Carefully lower the machine into position. NOTICE: B e careful when you move the bike. All abrupt motions can affect the computer operation. 17 - Schwinn 270i Recumbent Bike | Assembly and Owner's Manual - Page 18
from the machine. Injury to you or damage to the machine can occur. 3. Tighten the upper locking nut to lock the leveler. Make sure the bike is level and stable before you exercise. X2 18 - Schwinn 270i Recumbent Bike | Assembly and Owner's Manual - Page 19
parts or signs of wear. Do not use if found in this condition. Monitor the Seat, Pedals, and Crank Arms closely. Contact your local Schwinn® distributor for repair information. • Maximum user exert yourself during exercise. Operate the machine in the manner described in this manual. • Correctly - Schwinn 270i Recumbent Bike | Assembly and Owner's Manual - Page 20
Fully Shrouded Flywheel M Pedal N Storage Bin O Seat Adjustment Handle P Handlebar, Upright Q Speakers R Fan S Media Tray T Telemetry Heart Rate (HR) Receiver ! WARNING WHAReNaIrNtGraintdeicmateosnaithoarzianrdgosusystems may be inaccurate. Over exercising may result in serious injury or situation - Schwinn 270i Recumbent Bike | Assembly and Owner's Manual - Page 21
features the Schwinn Dual Track™ display with touch control buttons to navigate you through the exercise programs. Resistance Level Quick Buttons Fan 10 9 8 7 6 5 4 3 2 1 10% 40% 70% Hr 21 15 QUICK START PROGRAMS PAUSE/ END GOAL TRACK 25 18 9 5 LAST 30 DAYS LONGEST WORKOUT CALORIE RECORD OK - Schwinn 270i Recumbent Bike | Assembly and Owner's Manual - Page 22
the current heart rate value falls into for the current User. These Heart Rate Zones 3 can be used as a workout guide for a certain target zone (anaerobic, aerobic, or fat burn). Consult a physician before you start an exercise program. Stop exercising if you feel pain or tightness in your chest - Schwinn 270i Recumbent Bike | Assembly and Owner's Manual - Page 23
time count of the workout, the average Time for the User Profile, or the total operational time of the machine. Note: If a Quick Start workout is performed for more than 99 reference only. Calories The Calories display field shows the estimated calories that you have burned during the exercise. 23 - Schwinn 270i Recumbent Bike | Assembly and Owner's Manual - Page 24
the best procedures to control the intensity of your exercise. The CHR sensors are the stainless steel parts of the Handlebars. To use, put maximum heart rate usually decreases from 220 Beats Per Minute (BPM) in Rate Zone (HRZ) is effective to burn fat and improve your cardiovascular system. Physical - Schwinn 270i Recumbent Bike | Assembly and Owner's Manual - Page 25
for your individual target heart rate zone. Note: As with all exercises and fitness regimens, always use your best judgment when you increase your exercise time or intensity. Heart Rate BPM (beats per minute) 250 200 150 100 50 FAT-BURNING TARGET HEART RATE 196 167 118 191 186 162 158 115 - Schwinn 270i Recumbent Bike | Assembly and Owner's Manual - Page 26
workouts in advance and try to follow the schedule. Seat Adjustment Correct seat placement encourages exercise efficiency seat toward the back. Step off the bike before you adjust the seat. 3. Push down on the Seat Adjustment Handle, and adjust the seat to the desired height. 4. Pull up the Seat - Schwinn 270i Recumbent Bike | Assembly and Owner's Manual - Page 27
Increase/Decrease buttons. The current interval and future intervals are set to the new level. The default Manual resistance level is 4. The time will count up from 00:00. Note: If a Manual workout is performed for more than 99 minutes and 59 seconds (99:59), the units for Time will shift to - Schwinn 270i Recumbent Bike | Assembly and Owner's Manual - Page 28
sure to select the proper User Profile before starting a workout. The last User that completed a workout will be the default user. User Profiles are assigned the default values until they are customized by editing. Be sure to edit the User Profile for more accurate calorie and heart rate information - Schwinn 270i Recumbent Bike | Assembly and Owner's Manual - Page 29
to select one of the User Profiles. 2. Push the OK button to select the User Profile. 3. The Console display shows the current User Profile name and the EDIT buttons to change the resistance level at any time in a workout program. To rapidly change the resistance level, push the desired Resistance - Schwinn 270i Recumbent Bike | Assembly and Owner's Manual - Page 30
the Profile Program and type of Goal for your workout (Distance, Time or Calories), and set the REVED : 122G61o2al value. REVED : 122612 1. Sit on the machine. 2. Push the Increase() or Decrease() buttons to select the correct User profile. 3. Push the Programs button. 4. Push the Left() or - Schwinn 270i Recumbent Bike | Assembly and Owner's Manual - Page 31
to your previous scores and not to other User Profiles. Compare your Fitness Scores to see shows how quickly your heart recovers from an exercise state to a more restful state. Improved best result, in the Manual program so you can control the levels of resistance. Heart Rate Control (HRC) Workout - Schwinn 270i Recumbent Bike | Assembly and Owner's Manual - Page 32
set the Heart Rate zone for the workout, and push OK. The Console shows the Heart Rate zone (percent) on the left, and the Heart Rate range for the User on the right side of the display. Consult a physician before you start an exercise program. Stop exercising if you feel pain or tightness in - Schwinn 270i Recumbent Bike | Assembly and Owner's Manual - Page 33
(and Achievements) The statistics from every workout are recorded to a User Profile. The Schwinn Dual Track™ Console shows the Goal Track workout Statistics on the Lower Display in three channels: a.) TIME (total), DISTANCE (total), and CALORIES (total) b.) SPEED (average), RPM (average), and - Schwinn 270i Recumbent Bike | Assembly and Owner's Manual - Page 34
YOU SURE? - YES" display, and push OK. The user workouts have been reset. 10. Push GOAL TRACK to return to the Power-Up screen. When a User performs a workout that surpasses the "LONGEST WORKOUT" or "CALORIE RECORD" of the previous workouts, the Console will congratulate with an audible sound and - Schwinn 270i Recumbent Bike | Assembly and Owner's Manual - Page 35
service technician use only). 1. Hold down the PAUSE/END button and Right button together for 3 seconds while in the Power-Up Mode to go into the Console Setup Mode. Note: Push PAUSE/END to exit the Console Setup units change when there is data in User Statistics, the statistics convert to the new - Schwinn 270i Recumbent Bike | Assembly and Owner's Manual - Page 36
in a secure location. Daily: Before each use, examine the exercise machine for loose, broken, damaged, or worn parts. Do not use if found in this condition. Repair or replace all parts at the first sign of wear or damage. After each workout, use a damp cloth to wipe your machine and Console free - Schwinn 270i Recumbent Bike | Assembly and Owner's Manual - Page 37
Maintenance Parts A VN U T CC D AA BB Z F X Y G H W O M L P K B C E I J SRQ 37 - Schwinn 270i Recumbent Bike | Assembly and Owner's Manual - Page 38
D Water Bottle Holder E Handlebar, Side F Seat Bottom G Seat Adjustment Handle H Frame Assembly I Rear Stabilizer J Pedal, Left K Shroud, Left L Transport Wheel M Stabilizer, Front N Heart Rate Cable, Lower O Speed Sensor P Crank Arm Q Servo Motor R Brake Assembly S Flywheel T Drive Belt U Speed - Schwinn 270i Recumbent Bike | Assembly and Owner's Manual - Page 39
Troubleshooting Condition/Problem No display/partial display/ unit will not turn on Things to and all connections are fine, replace the Console. If the above steps do not resolve the problem, contact your local distributor for further assistancee. Be sure cable is connected securely to Console. Be - Schwinn 270i Recumbent Bike | Assembly and Owner's Manual - Page 40
will not turn on, but Console operates Unit rocks/does not sit level Seat Assembly shifts / squeaks when in use Pedals loose/unit difficult to pedal Check . Move machine to level area. Check hardware that attaches Seat assembly, and fully tighten hardware. Pedal should be tightened securely to - Schwinn 270i Recumbent Bike | Assembly and Owner's Manual - Page 41
41 - Schwinn 270i Recumbent Bike | Assembly and Owner's Manual - Page 42
Nautilus® 8003249.090113.A Bowflex® Schwinn® Fitness EN Universal®
This product is compliant with the
applicable CE requirements.
ASSEMBLY MANUAL / OWNER’S MANUAL
270
i