Schwinn A10 Upright Bike Assembly Manual
Schwinn A10 Upright Bike Manual
View all Schwinn A10 Upright Bike manuals
Add to My Manuals
Save this manual to your list of manuals |
Schwinn A10 Upright Bike manual content summary:
- Schwinn A10 Upright Bike | Assembly Manual - Page 1
003-3799-042310A - Schwinn A10 Upright Bike | Assembly Manual - Page 2
, (800) NAUTILUS / (800) 628-8458, www.NautilusInc.com - Customer Service: North America (800) 605-3369, [email protected] | Europe, Middle East Para obtener este manual en Español Latino Americano vaya a: http://www.schwinnfitness.com. Important Safety Instructions This icon means - Schwinn A10 Upright Bike | Assembly Manual - Page 3
Parts Item Qty Description 1 1 Main Frame 2 1 Front Stabilizer 3 1 Rear Stabilizer 4 1 Seat Post 5 1 Adjustment Knob (pre-installed) 6 1 Seat Hardware Item Qty Description 7 1 Console Mast (with pre-installed Handlebar Bracket) 8 1 Console 9 1 Handlebars 10 1 Pedal, Left (L) - Schwinn A10 Upright Bike | Assembly Manual - Page 4
Assembly 1. Attach Stabilizers to Main Frame 2. Install Pedals 4 - Schwinn A10 Upright Bike | Assembly Manual - Page 5
3. Attach Seat Post to Main Assembly Note: Hardware is pre-installed on Seat and not on Hardware Card. 4. Attach Seat Note: The Adjustment Knob is pre-installed on the Main Frame. 5 - Schwinn A10 Upright Bike | Assembly Manual - Page 6
5. Install Console Mast on Main Assembly NOTICE: Do not crimp Console Cable. 6. Install Handlebars on Console Mast Note: Hardware is pre-installed on Console Mast and not on Hardware Card. NOTICE: Make sure the Handlebar Bracket has an equal distance between the two ends of the bracket and the - Schwinn A10 Upright Bike | Assembly Manual - Page 7
7. Install Console on Console Mast Note: Hardware is pre-installed on Console and not on Hardware Card. NOTICE: Do not crimp Console Cable. Make sure that the switch on the back of the Console is set to B. 8. Install Water Bottle Holder Note: Hardware is pre-installed on Console Mast and not on - Schwinn A10 Upright Bike | Assembly Manual - Page 8
9. Install Batteries in Console Note: The console uses D size batteries (LR20). Make sure that the batteries point in the direction of the +/- indicators in the battery bay. If you use rechargeable batteries, the optional power adapter will not recharge the batteries. Optional Power Adapter The - Schwinn A10 Upright Bike | Assembly Manual - Page 9
are tight and components are properly assembled. Do not use or put the machine into service until the machine has been fully assembled and inspected for correct performance in accordance with the Owner's Manual. Leveling Your Bike The levelers are the polygonal end caps on the Rear Stabilizer. Turn - Schwinn A10 Upright Bike | Assembly Manual - Page 10
Printed in China
003–3799–042310A