Schwinn A20 Recumbent Bike Assembly Manual
Schwinn A20 Recumbent Bike Manual
 |
View all Schwinn A20 Recumbent Bike manuals
Add to My Manuals
Save this manual to your list of manuals |
Schwinn A20 Recumbent Bike manual content summary:
- Schwinn A20 Recumbent Bike | Assembly Manual - Page 1
003-3802-042310A - Schwinn A20 Recumbent Bike | Assembly Manual - Page 2
to use genuine replacement parts can cause a risk to users, keep the machine from operating correctly and void the warranty. • Do not use or put the machine into service until the machine has been fully assembled and inspected for correct performance in accordance with the Owner's Manual. • Read and - Schwinn A20 Recumbent Bike | Assembly Manual - Page 3
Parts Item Qty Description 1 1 Main Unit 2 1 Front Stabilizer 3 1 Rear Stabilizer 4 1 Seat Rail 5 1 Seat Bracket Assembly 6 1 Seat Bottom 7 1 Seat Back Hardware Item Qty Description 8 1 Side Handlebars 9 1 Console - Schwinn A20 Recumbent Bike | Assembly Manual - Page 4
Assembly 1. Attach Front Stabilizer to Main Unit 2. Install Handlebar to Seat Bracket NOTICE: Do not crimp cable from Handlebar. 4 - Schwinn A20 Recumbent Bike | Assembly Manual - Page 5
3. Attach Seat Bottom and Seat Back to Seat Bracket NOTICE: Do not crimp cable. 4. Slide Seat Assembly onto Seat Rail NOTICE: Do not crimp cables. 5. Install Seat Rail Assembly to Main Assembly NOTICE: Connect Heart Rate (HR) cables from Seat Rail and Main Unit. Do not crimp cables. 5 - Schwinn A20 Recumbent Bike | Assembly Manual - Page 6
6. Attach Rear Stabilizer to Seat Rail NOTICE: Connect Heart Rate (HR) cables from Seat Rail and Handlebar. Do not crimp cables. 7. Install Console Mast to Main Assembly Note: You can attach a wire (or string) to the Console Cable and HR Cable to help pull the cables through the Console Mast. NOTICE - Schwinn A20 Recumbent Bike | Assembly Manual - Page 7
8. Install the Console to the Console Mast Note: Hardware is pre-installed on Console and not on Hardware Card. NOTICE: Do not crimp cables. Make sure that the switch on the back of the Console is set to B. 9. Install Pedals 7 - Schwinn A20 Recumbent Bike | Assembly Manual - Page 8
can operate on battery power or AC power. For AC power, it is necessary to order the optional Power Adapter. If batteries and the Power Adapter are installed, the console will use the Power Adapter to operate. Note: If you use rechargeable batteries, the optional Power Adapter will not recharge the - Schwinn A20 Recumbent Bike | Assembly Manual - Page 9
tight and components are properly assembled. Do not use or put the machine into service until the machine has been fully assembled and inspected for correct performance in accordance with the Owner's Manual. Leveling Your Bike The levelers are the polygonal end caps on the Rear Stabilizer. Turn the - Schwinn A20 Recumbent Bike | Assembly Manual - Page 10
Printed in China
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
-
10
 |
 |
003–3802–042310A