Schwinn Airdyne AD6 International model Assembly and Owner's Manual
Schwinn Airdyne AD6 International model Manual
View all Schwinn Airdyne AD6 International model manuals
Add to My Manuals
Save this manual to your list of manuals |
Schwinn Airdyne AD6 International model manual content summary:
- Schwinn Airdyne AD6 International model | Assembly and Owner's Manual - Page 1
AD6 This product is compliant with the applicable CE requirements. ASSEMBLY MANUAL / OWNER'S MANUAL - Schwinn Airdyne AD6 International model | Assembly and Owner's Manual - Page 2
Custom Time Workout 20 Pausing or Stopping 20 Results Mode 20 Console Service Mode 21 Maintenance 22 Replacing the Console Batteries 23 Maintenance Parts 24 Troubleshooting 25 To validate warranty support, keep the original proof of purchase and record the following - Schwinn Airdyne AD6 International model | Assembly and Owner's Manual - Page 3
read and understand the Assembly instructions. • Keep bystanders and children service until the machine has been fully assembled and inspected for correct performance in accordance with the Manual. • Read and understand the complete Manual supplied with this machine before first use. Keep the Manual - Schwinn Airdyne AD6 International model | Assembly and Owner's Manual - Page 4
of age. • Prior to use, read and understand the Owner's Manual. • Injury or death is possible if Caution is not used while infliger de graves blessures. • Cette machine supporte un poids maximal de 300lbs. (136kg www.nautilus.com Phone:1-800-NAUTILUS Model: Schwinn®Airdyne®AD6 Rating: NA Class: SA, HA - Schwinn Airdyne AD6 International model | Assembly and Owner's Manual - Page 5
25.7" ) This product conforms to the applicable EN ISO 20957 International Standards for Stationary Training Equipment, Class S DO NOT dispose of this product as refuse. tighten, and the left (counterclockwise) to loosen, unless instructed otherwise. • When attaching 2 pieces, lightly lift and look - Schwinn Airdyne AD6 International model | Assembly and Owner's Manual - Page 6
R ") and left (" L ") parts to assist with assembly. Item Qty Description Item Qty Description 1 1 Frame 9 1 Pedal Strap, Left 2 1 Console Support Bar 10 1 Pedal, Left 3 1 Console 11 1 Foot Peg, Left 4 1 Water Bottle Holder 12 1 Stabilizer, Front 5 1 Handlebar, Left 13 1 Foot - Schwinn Airdyne AD6 International model | Assembly and Owner's Manual - Page 7
HARDWARE / TOOLs AB C D E Item Qty Description A 4 Button Head Hex Screw, M8x1.25x20 B 4 Washer, M8 Lock C 4 Washer, M8 Item Qty Description D 4 Washer, M8 Black E 4 Button Head Hex Screw, M8x1.25x12 Black Tools Included 6 mm #2 13 mm 15 mm 17 mm 2 AA size batteries (LR6) - Schwinn Airdyne AD6 International model | Assembly and Owner's Manual - Page 8
ASSEMBLY 1. Attach Stabilizers to Frame Note: Hardware is pre-installed and not on the Hardware Card ( * ). 6mm X4 * 8 * 1 12 15 14 R 9 2. Attach Pedals and then Pedal Straps to Frame Assembly Note: The Left Pedal is reverse-threaded. Be sure to attach Pedals on the proper side of the - Schwinn Airdyne AD6 International model | Assembly and Owner's Manual - Page 9
to Frame Assembly Note: Do not crimp the cables. Pull the lower cable to remove any slack as you insert the Console Support Bar. In order to avoid possible serious injury, when inserting the tube ends into the Frame Assembly be careful to avoid fingers or hands being - Schwinn Airdyne AD6 International model | Assembly and Owner's Manual - Page 10
5. Connect Cable and Attach the Console Note: Do not crimp Console Cable. X4 * #2 X4 * #2 6. Attach Water Bottle Holder to Frame Assembly Note: Hardware is pre-installed and not on the Hardware Card ( * ). 4 X2 #2 * 10 - Schwinn Airdyne AD6 International model | Assembly and Owner's Manual - Page 11
7. Attach Foot Pegs and Handlebar Arms to Frame Assembly 5 16 11 X4 C 13 B A 6mm 8. Loosen and Pull the Seat Post Adjustment Knob to Attach Seat Post to Frame Assembly 7 STOP 11 - Schwinn Airdyne AD6 International model | Assembly and Owner's Manual - Page 12
. Final Inspection Inspect your machine to ensure that all hardware is tight and components are properly assembled. Do not use or put the machine into service until the machine has been fully assembled and inspected for correct performance in accordance with the Owner - Schwinn Airdyne AD6 International model | Assembly and Owner's Manual - Page 13
BEFORE YOU START Moving the Machine The machine may be moved by one or more persons depending on their physical abilities and capacities. Make sure that you and others are all physically fit and able to move the machine safely. 1. Use the Rear Stabilizer to carefully lift the machine onto the - Schwinn Airdyne AD6 International model | Assembly and Owner's Manual - Page 14
Manual. Keep the Manual for future reference. Read and understand all warnings on this machine. If at any time the Warning stickers become loose, unreadable or dislodged, contact your local Schwinn control of the machine is managed by approved staff. The degree of management depends on the user's - Schwinn Airdyne AD6 International model | Assembly and Owner's Manual - Page 15
Roller I Leveler J Stabilizer, Front K Foot Peg L Pedal G H I J M Stabilizer, Rear N Foot Step Pad O Seat Post Adjustment Knob P Seat R Q S Accessories Q AirDyne® Reading Rack R AirDyne® Wind Screen To order, contact your local Schwinn® distributor S Remote Heart Rate Chest Strap 15 - Schwinn Airdyne AD6 International model | Assembly and Owner's Manual - Page 16
99.99, the display starts again at 0.00. Note: To change the measurement units to English Imperial or metric, refer to the "Console Service Mode" section in this manual. The Odometer ( "Odo." ) shows the sum of all workout distances. It is displayed when a workout is paused, or as an option in the - Schwinn Airdyne AD6 International model | Assembly and Owner's Manual - Page 17
an uncoded heart rate strap from Polar Electro or an uncoded POLAR® compatible model. (Coded POLAR® heart rate straps such as POLAR® OwnCode® chest straps approximately one BPM for each year. There is no indication that training influences the decrease in maximum heart rate. Individuals of the same - Schwinn Airdyne AD6 International model | Assembly and Owner's Manual - Page 18
Operations What to Wear Wear rubber-soled athletic shoes. You will need the appropriate clothes for exercise that allow you to move freely. How Often Should You Exercise Consult a physician before you start an exercise program. Stop exercising if you feel pain or tightness in your chest, become - Schwinn Airdyne AD6 International model | Assembly and Owner's Manual - Page 19
push a Pedal to assist with starting the workout. To increase the air resistance and workload, increase your level of activity. To exercise all the muscle groups in your arms, alter your grasp to palms up for part of the workout. When done with your workout, reduce the Resistance Fan speed until - Schwinn Airdyne AD6 International model | Assembly and Owner's Manual - Page 20
Initial Setup During the initial power-up, the Console will display "Alt" and must be setup with the current workout altitude. 1. Push the Increase/Decrease buttons to change the value for the altitude. Entering the correct value will make the calorie count more accurate. 2. Push the START/STOP - Schwinn Airdyne AD6 International model | Assembly and Owner's Manual - Page 21
is installed. 1. Hold down the Increase button and Decrease button together for 3 seconds while in the Idle Mode to go into the Con- sole Service Mode. 2. The Console display shows the Units prompt ( "Unit" ). Push START/STOP to start Units option. Push the Increase/ Decrease buttons to change - Schwinn Airdyne AD6 International model | Assembly and Owner's Manual - Page 22
MAINTENANCE Read all maintenance instructions fully before you start any repair work. In some conditions, an assistant is required to do the necessary tasks. Equipment must be regularly examined for - Schwinn Airdyne AD6 International model | Assembly and Owner's Manual - Page 23
Replacing the Console Batteries The Console will display "Lbatt" for ten seconds when the batteries are around 10% of their rated power during power up. When replacing the batteries, make sure the batteries point in the +/- direction shown in the battery bay. Note: The console uses AA size - Schwinn Airdyne AD6 International model | Assembly and Owner's Manual - Page 24
, Right B Handlebar, Right C Handlebar, Left D Foot Peg, Left E Water Bottle Holder F Console G Locking Knob H Spring, Knob I Console Cable, Upper J Console Support Bar K Seat L Seat Post M Foot Step Pad 24 N Seat Adjustment Knob O Frame P Stabilizer, Rear Q Shroud, Left R Crank Arm, Left S Center - Schwinn Airdyne AD6 International model | Assembly and Owner's Manual - Page 25
Troubleshooting Condition/Problem Console will not power up/ turn on/start Things to Console if damaged. If the above steps do not resolve the problem, contact your local Schwinn® distributor. Change display units (consult "Console Service Mode") Make sure the data cable is connected to the back - Schwinn Airdyne AD6 International model | Assembly and Owner's Manual - Page 26
Unit rocks/does not sit level Pedals loose/unit difficult to pedal Clicking sound when pedaling Seat post movement Check leveler adjustment Leveling feet may be turned in or out to level bike. Check surface under unit Check pedal to crank connection Check crank to axle connection Check pedal to - Schwinn Airdyne AD6 International model | Assembly and Owner's Manual - Page 27
27 - Schwinn Airdyne AD6 International model | Assembly and Owner's Manual - Page 28
Nautilus® 8001314.033113.B Bowflex® Schwinn® Fitness EN Universal®
ASSEMBLY MANUAL / OWNER’S MANUAL
This product is compliant with the
applicable CE requirements.
AD6