Schwinn Journey 2.0 Recumbent Bike Assembly and Owner's Manual
Schwinn Journey 2.0 Recumbent Bike Manual
View all Schwinn Journey 2.0 Recumbent Bike manuals
Add to My Manuals
Save this manual to your list of manuals |
Schwinn Journey 2.0 Recumbent Bike manual content summary:
- Schwinn Journey 2.0 Recumbent Bike | Assembly and Owner's Manual - Page 1
230 / 430 / 470 / Manual en Español Latino Americano: http://www.schwinnfitness.com ASSEMBLY MANUAL / OWNER'S MANUAL - Schwinn Journey 2.0 Recumbent Bike | Assembly and Owner's Manual - Page 2
or Stopping 32 Results / Cool Down Mode 33 GOAL TRACK Statistics 33 Console Service Mode 36 Maintenance 37 Maintenance Parts 38 Troubleshooting 40 Warranty 43 To validate warranty support, keep the original proof of purchase and record the following information: Serial Number - Schwinn Journey 2.0 Recumbent Bike | Assembly and Owner's Manual - Page 3
Nautilus® replacement parts and hardware. Failure to use genuine replacement parts can cause a risk to users, keep the machine from operating correctly and void the warranty. • Do not use until the machine has been fully assembled and inspected for correct performance in accordance with the Manual - Schwinn Journey 2.0 Recumbent Bike | Assembly and Owner's Manual - Page 4
age. • Prior to use, read and understand the Owner's Manual. • Injury or death is possible if Caution is not blessures. • Cette machine supporte un poids maximal de 300lbs machine and power supply comply with part 15 of the FCC rules. Operation accordance with the instructions, may cause harmful - Schwinn Journey 2.0 Recumbent Bike | Assembly and Owner's Manual - Page 5
please refer to our website at www.nautilus.com/prop65. Before Assembly Select the the location must be on a hard, level surface. Allow a workout area of a minimum 74.6" x 110.5" (189.5 cm the left (counterclock- wise) to loosen, unless instructed otherwise. • When attaching 2 pieces, lightly lift - Schwinn Journey 2.0 Recumbent Bike | Assembly and Owner's Manual - Page 6
PARTS 17 16 15 14 13 12 2 1 5 6 7 3 4 9 11 8 10 Item Qty Description 1 1 Console 2 1 Water Bottle Holder 3 1 Seat Back 4 1 Cover 5 1 Seat Frame Assembly 6 1 Seat Bottom 7 1 Seat Adjustment Handle 8 1 Rear Stabilizer 9 1 Frame Item Qty Description 10 1 AC Adapter 11 1 - Schwinn Journey 2.0 Recumbent Bike | Assembly and Owner's Manual - Page 7
HARDWARE / TOOLs A B C D E F G H I J Item Qty Description A 8 Button Head Hex Screw, M8x20 B 10 Button Head Hex Screw, M6x12 C 4 Flat Washer, M8 D 8 Lock Washer, M8 E 10 Flat Washer, M6 Item Qty Description F 2 Phillips Head Screw, M5x12 G 14 Lock Washer, M6 H 4 Curved - Schwinn Journey 2.0 Recumbent Bike | Assembly and Owner's Manual - Page 8
ASSEMBLY 1. Attach Stabilizers to Frame Note: H ardware is pre-installed and not on the Hardware Card. * 6mm X2 * * * 6mm X2 * * * 8 9 12 8 - Schwinn Journey 2.0 Recumbent Bike | Assembly and Owner's Manual - Page 9
2. Attach the Seat Frame Assembly to the Seat Rail NOTICE: Do not crimp the Heart Rate Cable. Once all hardware has been inserted, be sure to fully tighten it. 6mm X4 A D C 5 X2 B 4mm GE 9 - Schwinn Journey 2.0 Recumbent Bike | Assembly and Owner's Manual - Page 10
3. Attach Seat Pads to Seat Frame Assembly 6 3 X8 E G B 4mm X4 H G I #2 10 - Schwinn Journey 2.0 Recumbent Bike | Assembly and Owner's Manual - Page 11
4. Attach Cover to Frame Assembly 4 11 - Schwinn Journey 2.0 Recumbent Bike | Assembly and Owner's Manual - Page 12
5. Attach Seat Adjustment Handle to Frame Assembly 7 12 - Schwinn Journey 2.0 Recumbent Bike | Assembly and Owner's Manual - Page 13
6. Connect the Cables and Attach the Console Mast to Frame Assembly NOTICE: Do not crimp Console Cables. 16 14 X4 J D A 6mm 15 13 - Schwinn Journey 2.0 Recumbent Bike | Assembly and Owner's Manual - Page 14
* * 7. Remove Hardware from Console NOTICE: Do not crimp the cable. Note: H ardware is pre-installed and not on the Hardware Card. * 1 X4 #2 8. Connect Cables and Attach Console to Frame Assembly NOTICE: Align the clips on the cable connectors and make sure the connectors lock. Do not - Schwinn Journey 2.0 Recumbent Bike | Assembly and Owner's Manual - Page 15
9. Attach Pedals to Frame Assembly NOTICE: The Left Pedal is reverse-threaded. Be sure to attach Pedals on the proper side of the Bike. Orientation is based from a seated position on the bike. The Left Pedal has an "L", the Right Pedal an "R". 13 11 15 - Schwinn Journey 2.0 Recumbent Bike | Assembly and Owner's Manual - Page 16
10. Attach Water Bottle Holder to Frame Assembly #2 X2 2 F 16 - Schwinn Journey 2.0 Recumbent Bike | Assembly and Owner's Manual - Page 17
all hardware is tight and components are properly assembled. Be sure to record the serial number in the field provided at the front of this manual. Do not use until the machine has been fully assembled and inspected for correct performance in accordance with the Owner - Schwinn Journey 2.0 Recumbent Bike | Assembly and Owner's Manual - Page 18
BEFORE YOU START Moving the Bike The machine may be moved by one or more persons depending on their physical abilities Push the machine into position. 4. Carefully lower the machine into position. NOTICE: B e careful when you move the bike. All abrupt motions can affect the computer operation. 18 - Schwinn Journey 2.0 Recumbent Bike | Assembly and Owner's Manual - Page 19
Leveling the Bike Levelers are found on each side of the Rear Stabilizer and on the Frame Rail. On the Rear Stabilizer, turn the Injury to you or damage to the machine can occur. 3. Tighten the upper locking nut to lock the leveler. Make sure the bike is level and stable before you exercise. 19 - Schwinn Journey 2.0 Recumbent Bike | Assembly and Owner's Manual - Page 20
loose parts or signs of wear. Do not use if found in this condition. Monitor the Seat, Pedals, and Crank Arms closely. Contact Nautilus® Customer Service • Do not over exert yourself during exercise. Operate the machine in the manner described in this manual. • Correctly adjust and safely engage all - Schwinn Journey 2.0 Recumbent Bike | Assembly and Owner's Manual - Page 21
D Media Tray E Fan F Speakers G Fully Shrouded Flywheel H Power Connector I Transport Wheel J Stabilizer K Leveler L Transport Handle M Seat Adjustment Knob N Water Bottle Holder O Adjustable Seat P Contact Heart Rate (CHR) Sensors Q Handlebar, Side R Pedal S Storage Bin T Handlebar, Upright 21 - Schwinn Journey 2.0 Recumbent Bike | Assembly and Owner's Manual - Page 22
Features The Console provides important information about your workout and lets you control the resistance levels while you exercise. The Console features the Schwinn Dual Track™ display with touch control buttons to navigate you through the exercise programs. Resistance Level Quick Buttons Fan 10 - Schwinn Journey 2.0 Recumbent Bike | Assembly and Owner's Manual - Page 23
workout Achievement Indicator Lights- when a workout result is reviewed, the achievement indicator light will activate. Schwinn workout guide for a certain target zone (anaerobic, aerobic, or fat burn). Consult a physician before you start an exercise program. Stop exercising Time or Calories), the - Schwinn Journey 2.0 Recumbent Bike | Assembly and Owner's Manual - Page 24
the machine. Note: If a Quick Start workout is performed for more than 99 minutes and 59 seconds this manual. Level The LEVEL display shows the current resistance level in the workout. RPM Calories The Calories display field shows the estimated calories that you have burned during the exercise. 24 - Schwinn Journey 2.0 Recumbent Bike | Assembly and Owner's Manual - Page 25
the Console. The CHR sensors are the stainless steel parts of the Handlebars. To use, put your hands Calculations Your maximum heart rate usually decreases from 220 Beats Per Minute (BPM) in childhood to is shown. The most efficient procedure to burn fat during exercise is to start at a slow pace - Schwinn Journey 2.0 Recumbent Bike | Assembly and Owner's Manual - Page 26
for your individual target heart rate zone. Note: As with all exercises and fitness regimens, always use your best judgment when you increase your exercise time or intensity. Heart Rate BPM (beats per minute) 250 200 150 100 50 FAT-BURNING TARGET HEART RATE 196 167 118 191 186 162 158 115 - Schwinn Journey 2.0 Recumbent Bike | Assembly and Owner's Manual - Page 27
workouts in advance and try to follow the schedule. Seat Adjustment Correct seat placement encourages exercise efficiency seat toward the back. Step off the bike before you adjust the seat. 3. Push down on the Seat Adjustment Handle, and adjust the seat to the desired height. 4. Pull up the Seat - Schwinn Journey 2.0 Recumbent Bike | Assembly and Owner's Manual - Page 28
level. The default Manual resistance level is 4. The time will count up from 00:00. Note: If a Manual workout is performed for more than 99 . The User profiles automatically record the workout results for each workout, and allow the workout data to be reviewed. The User profile stores the following - Schwinn Journey 2.0 Recumbent Bike | Assembly and Owner's Manual - Page 29
the proper User Profile before starting a workout. The last User that completed a workout will be the default user. User Profiles are assigned the default values until they are customized by editing. Be sure to edit the User Profile for more accurate calorie and heart rate information. From the - Schwinn Journey 2.0 Recumbent Bike | Assembly and Owner's Manual - Page 30
screen. Changing Resistance Levels Push the Resistance Level Increase() or Decrease() buttons to change the resistance level at any time in a workout program. To rapidly change the resistance level, push the desired Resistance Level Quick Button. The Console will adjust to the selected resistance - Schwinn Journey 2.0 Recumbent Bike | Assembly and Owner's Manual - Page 31
Profile and Goal Program The Console lets you select the Profile Program and type of Goal for your workout (Distance, Time or Calories), and set the Goal value. REVED : 122612 REVED : 122612 1. Sit on the machine. 2. Push the Increase() or Decrease() buttons to select the correct User - Schwinn Journey 2.0 Recumbent Bike | Assembly and Owner's Manual - Page 32
Heart Rate Control workout level: BEGINNER ( "BEG" ) or ADVANCED ( "ADV" ) and push OK. 2. Push the Increase() or Decrease() buttons to select the percentage of maximum heart rate: 50-60%, 60-70%, 70- 80%, 80-90%. Consult a physician before you start an exercise program. Stop exercising if you - Schwinn Journey 2.0 Recumbent Bike | Assembly and Owner's Manual - Page 33
(and Achievements) The statistics from every workout are recorded to a User Profile. The Schwinn Dual Track™ Console shows the Goal Track workout Statistics on the Lower Display in three channels: a.) TIME (total), DISTANCE (total), and CALORIES (total) b.) SPEED (average), RPM (average), and - Schwinn Journey 2.0 Recumbent Bike | Assembly and Owner's Manual - Page 34
have been reset. 10. Push GOAL TRACK to return to the Power-Up screen. When a User performs a workout that surpasses the "LONGEST WORKOUT" or "CALORIE RECORD" of the previous workouts, the Console will congratulate with an audible sound and tell the User the new achievement. The corresponding - Schwinn Journey 2.0 Recumbent Bike | Assembly and Owner's Manual - Page 35
www.SchwinnConnect.com Go to the www.SchwinnConnect.com web site to create an online profile, upload your workout results using a USB Flash Drive, and then view and track your achievements over time. www.SchwinnConnect.com also works with MyFitnessPal. Simply follow the prompts - Schwinn Journey 2.0 Recumbent Bike | Assembly and Owner's Manual - Page 36
on/ off), or see maintenance statistics (Error Log and Run Hours - for service technician use only). 1. Hold down the PAUSE/END button and Right button together with the current setting. Push the Increase/Decrease buttons to change between "BIKE" and Elliptical ("ELIP"). 9. Push OK to set. 10. The - Schwinn Journey 2.0 Recumbent Bike | Assembly and Owner's Manual - Page 37
MAINTENANCE Read all maintenance instructions fully before you start any repair work. In some , examine the exercise machine for loose, broken, damaged, or worn parts. Do not use if found in this condition. Repair or replace all parts at the first sign of wear or damage. After each workout, use a - Schwinn Journey 2.0 Recumbent Bike | Assembly and Owner's Manual - Page 38
Maintenance Parts V T U N O P A CC AA BB Z Y X W D G K M L B C E F H I J Q R S 38 - Schwinn Journey 2.0 Recumbent Bike | Assembly and Owner's Manual - Page 39
D Water Bottle Holder E Handlebar, Side F Seat Bottom G Seat Adjustment Handle H Rear Stabilizer I Shroud, Left J Pedal, Left K Frame Assembly L Transport Wheel M Stabilizer, Front N Heart Rate Cable, Lower O Speed Sensor Magnet P Speed Sensor Q Crank Arm R - Schwinn Journey 2.0 Recumbent Bike | Assembly and Owner's Manual - Page 40
Troubleshooting Condition/Problem No display/partial display/ unit will not turn on Things display and all connections are fine, replace the Console. If the above steps do not resolve the problem, contact Customer Care for further assistance. Be sure cable is connected securely to Console. Be sure - Schwinn Journey 2.0 Recumbent Bike | Assembly and Owner's Manual - Page 41
or will not turn off Fan will not turn on, but Console operates Unit rocks/does not sit level Pedals loose/unit difficult to pedal Seat Assembly shifts / squeaks when in use Check data cable integrity All wires in cable should be intact. If any are cut or crimped, replace cable - Schwinn Journey 2.0 Recumbent Bike | Assembly and Owner's Manual - Page 42
42 - Schwinn Journey 2.0 Recumbent Bike | Assembly and Owner's Manual - Page 43
(Assembly, Owner's Manuals, etc.). • Product must be used exclusively for the purpose intended. • Notify Nautilus within 30 days after detecting an issue with the Product. • Install replacement parts or components in accordance with any Nautilus instructions. • Perform diagnostic procedures with - Schwinn Journey 2.0 Recumbent Bike | Assembly and Owner's Manual - Page 44
Nautilus® 8002152.090113.C Bowflex® Schwinn® Fitness EN Universal®
ASSEMBLY MANUAL / OWNER’S MANUAL
Manual en Español Latino Americano:
230 /