Schwinn SR23 Recumbent Bike Assembly Manual

Schwinn SR23 Recumbent Bike Manual

Get Schwinn SR23 Recumbent Bike PDF manuals and user guides View all Schwinn SR23 Recumbent Bike manuals
Add to My Manuals
Save this manual to your list of manuals

Schwinn SR23 Recumbent Bike manual content summary:

  • Schwinn SR23 Recumbent Bike | Assembly Manual - Page 1
    Do not print this page
  • Schwinn SR23 Recumbent Bike | Assembly Manual - Page 2
    ©2006. Nautilus, Inc. All Rights Reserved. Schwinn is a registered trademark. Nautilus, Inc., World Headquarters, 16400 SE Nautilus Dr., Vancouver, WA 98683
  • Schwinn SR23 Recumbent Bike | Assembly Manual - Page 3
    Recumbent Assembly guide PN 001-7088 Rev B (053107) Assembly Guide
  • Schwinn SR23 Recumbent Bike | Assembly Manual - Page 4
    CONTENTS Table of Contents Hardware 2 Exploded View 4 Parts List 5 Assembly Instructions 6 
  • Schwinn SR23 Recumbent Bike | Assembly Manual - Page 5
    SW231 Hardware Note: Please verify you have all correct parts and quantities before assembling unit. If you are missing items, are short quantities, or have damaged components, please contact Schwinn at 1.800.864.1270  I-13 Carriage Bolt M8xP1.25x85MM (1) I-1 M8xP1.25x85mm (1) I-2 Knob (1)
  • Schwinn SR23 Recumbent Bike | Assembly Manual - Page 6
    Note: Please verify you have all correct parts and quantities before assembling unit. If you are missing items, are short quantities, or have damaged components, please contact Schwinn at 1.800.864.1270  I-3 Flat Washer 8*16*2t(20) I-8 Screw M5*16MM (4) I-10 Knob (1) I-7 Allen Bolt M8xP1.0x45mm
  • Schwinn SR23 Recumbent Bike | Assembly Manual - Page 7
    Exploded View EXPLODED VIEW A A-1 A-2 B I-2 I-3 I-4 C C-1 C-2 C-3 C-4 D-1 E I-6 F-L I-13 I-1 I-3 I-5 F-R D-2 L-1 I-5 K-1 I-3 K-3 I-8 K-2 I-3 H I-7 D-22 D-18 D-18 D-18 D-19 L I-9 I-10 L-2 I-11 K I-5 I-3 J D-17 D I-6 G 
  • Schwinn SR23 Recumbent Bike | Assembly Manual - Page 8
    PARTS LIST PARTS LIST Ref. Description Qty A Computer 1 A-1 Computer bracket 1 A-2 Screw M5x14L 4 B Handlebar 1 C D-1 Lower heart rate wire 1 D-2 Lower computer wire 1 D-17 AC adaptor 1 D-18 Screw M8x1.25x16L 9 D-19 Flat washer 8x16 11
  • Schwinn SR23 Recumbent Bike | Assembly Manual - Page 9
    gather the pieces you need for each step and thoroughly read the assembly instructions for that step prior to starting assembly for the step. 2. When attaching two pieces, gently lift and look through the bolt holes to help guide the bolt through the holes. 3. As a general rule, and for
  • Schwinn SR23 Recumbent Bike | Assembly Manual - Page 10
    ASSEMBLY INSTRUCTIONS Step 1 Install Front and Rear Stabilizers Parts: • Main frame (Ref. D ) • Front Stabilizer (Ref. E ) • Rear Stabilizer (Ref. G ) • M8x16 Screws (Ref. I-6) Tools: • Supplied Allen Wrench 1-1 Attach the Rear Stabilizer (G) to the rear of the
  • Schwinn SR23 Recumbent Bike | Assembly Manual - Page 11
    ASSEMBLY INSTRUCTIONS Step 2 Install Pedals Parts: • Right Pedal (F-R) • Left Pedal (F-L) Tools: • Supplied Pedal Wrench 2-1 Screw the Left Pedal ( has an "L" stamped into the end of the pedal ) into the Left Crank
  • Schwinn SR23 Recumbent Bike | Assembly Manual - Page 12
    ASSEMBLY INSTRUCTIONS Step 3 Install Handlebar Parts: • Seat Frame (Ref. K) • Handlebar (Ref. J) • Four M8x16 screws (Ref. I-5) • Four 8x16x2 Washers (Ref. I-3) Tools: • Supplied Allen Wrench 3-1 Align Handlebar with holes in Seat Frame. 3-2 Route
  • Schwinn SR23 Recumbent Bike | Assembly Manual - Page 13
    ASSEMBLY INSTRUCTIONS Step 4 Install Bottle Holder Parts: • Water Bottle Holder (Ref. K-2) • Four M5x16 Screws (Ref. I-8) • Seat Bottom (Ref. K-1) Tools: • Supplied Phillips Head Screwdriver 4-1 Align the Water Bottle Holder under the left side
  • Schwinn SR23 Recumbent Bike | Assembly Manual - Page 14
    ASSEMBLY INSTRUCTIONS Step 5 Install Seat Bottom Parts: • Seat Bottom (Ref. K-1) • Four M8x1x45 Screws (Ref. I-7) • Four 8x16x2 Washers (Ref. I-3) Tools: • Supplied Allen Wrench 5-1 Align the Seat Bottom (K-1) with the Seat Frame (K). 5-2 Install and
  • Schwinn SR23 Recumbent Bike | Assembly Manual - Page 15
    ASSEMBLY INSTRUCTIONS Step 6 Install Seat bracket Parts: • Seat Bracket (Ref. L) • Seat Back (Ref L-1) • Four M8x16 Screws (Ref. I-5) • Four 8x16x2 Washers (Ref. I-3) Tools: • Supplied Allen Wrench 6-1 Align the Seat Bracket(L) with the Seat
  • Schwinn SR23 Recumbent Bike | Assembly Manual - Page 16
    ASSEMBLY INSTRUCTIONS Step 7 Install Seat Back Assy and Seat Back Cover Parts: • Seat Back Cover (Ref. L-2) • Seat Back Assy (From step 5) • Five M8x35 Screws (Ref. I-9) • Five 8x16x2 Washers (Ref. I-3) • Seat Adjust Knob (Ref. I-10) • Washer 10x25x2t (Ref. I-
  • Schwinn SR23 Recumbent Bike | Assembly Manual - Page 17
    ASSEMBLY INSTRUCTIONS Step 8 Prepare to Install Seat Assembly Tools: • Supplied Allen Wrench 8-1 Unscrew the seven screws and washers (D-18) that secure the Seat Rail (H) and remove the
  • Schwinn SR23 Recumbent Bike | Assembly Manual - Page 18
    ASSEMBLY INSTRUCTIONS Step 9 Install Seat Assembly Parts: • Seat Assembly (From Steps 3 through 7) • Seat Rail (Ref. H) • Seat Rail Bracket (Ref. D-22) Tools: • knob. This also how you adjust the Seat Back to position the lumbar support to your preference. Figure B Figure A H M D-22 K-3 15
  • Schwinn SR23 Recumbent Bike | Assembly Manual - Page 19
    ASSEMBLY INSTRUCTIONS Step 10 Install Handlebar Mast Parts: • Handlebar Mast (Ref C) Tools: • Supplied Allen Wrench 10-1 Remove the four Allen Bolts (C-1) and Curved Washers (C-2) from the frame . 10-2 Connect the Upper and Lower
  • Schwinn SR23 Recumbent Bike | Assembly Manual - Page 20
    ASSEMBLY INSTRUCTIONS Step 11 Install Handlebar Parts: • Handlebar (Ref B) • Washer (Ref I-3) • Screw M8x16 (Ref I-5) 11-1 Tuck the Computer Wires into the Mast to allow insertion of the Handlebar . 11-2 Slide the Handlebar (B)
  • Schwinn SR23 Recumbent Bike | Assembly Manual - Page 21
    ASSEMBLY INSTRUCTIONS Step 12 Install Computer Bracket Parts: • Computer Bracket (Ref. A-1) • Angle Adjust Knob (Ref. I-2) • Carriage Bolt M8x1.25x85 (Ref. I-13) • Screw M8x85 (Ref Angle Adjust Knob to position the Computer to fit individual preferences. I-13 A-1 I-1 I-3 I-2 Assembled I-4 18
  • Schwinn SR23 Recumbent Bike | Assembly Manual - Page 22
    ASSEMBLY INSTRUCTIONS Step 13 Install Computer Parts: • Computer (Ref. A ) Tools: • Supplied Phillips Head Screwdriver 13-1 Remove the four screws from the back of the Computer. 13-2 Connect the Computer Wire and Heartrate
  • Schwinn SR23 Recumbent Bike | Assembly Manual - Page 23
    ASSEMBLY INSTRUCTIONS Step 14 Plug in AC Adapter Parts: • AC Adapter (Ref. D-17) 14-1 Plug the AC Adapter (P) into the receptacle on the front right of the unit and into a 110 volt outlet. D-17 20
  • Schwinn SR23 Recumbent Bike | Assembly Manual - Page 24
    ASSEMBLY INSTRUCTIONS Assembly is complete! Please reference the Owner's Manual for information regarding computer operation, product maintenance, Warranty information, and general fitness and exercise guidelines. 21
  • Schwinn SR23 Recumbent Bike | Assembly Manual - Page 25
    IMPORTANT CONTACT NUMBERS If you need assistance, please refer to your owners manual for warranty and contact information. 22
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
Do not print this page