Schwinn Tango Tandem Seven IPS Schwinn Owner's Manual - Page 26

Basic Maintenance, Storage

Get Schwinn Tango Tandem Seven IPS PDF manuals and user guides View all Schwinn Tango Tandem Seven IPS manuals
Add to My Manuals
Save this manual to your list of manuals

Page 26 highlights

BEFORE YOU RIDE BASIC MAINTENANCE The following procedures will help you maintain your bicycle for years of enjoyable riding. • For painted frames, dust the surface and remove any loose dirt with a dry cloth. To clean, wipe with a damp cloth soaked in a mild detergent mixture. Dry with a cloth and polish with car or furniture wax. Use soap and water to clean plastic parts and rubber tires. Chrome plated bikes should be wiped over with a rust preventative fluid. • Store your bicycle under shelter. Avoid leaving it in the rain or exposed to corrosive materials. • Riding on the beach or in coastal areas exposes your bicycle to salt which is very corrosive. Wash your bicycle frequently and wipe or spray all unpainted parts with an anti-rust treatment. Make sure wheel rims are dry so braking performance is not affected. After rain, dry your bicycle and apply anti-rust treatment. If the hub and bottom bracket bearings of your bicycle have been submerged in water, they should be taken out and re-greased. This will prevent accelerated bearing deterioration. • If paint has become scratched or chipped to the metal, use touch up paint to prevent rust. Clear nail polish can also be used as a preventative measure. • Regularly clean and lubricate all moving parts, tighten components and make adjustments as required. (Refer to Parts 4 and 5 of this manual for further details). STORAGE • Keep your bicycle in a dry location away from the weather and the sun. Ultraviolet rays may cause paint to fade or rubber and plastic parts to crack. • Before storing your bicycle for a long period of time, clean and lubricate all components and wax the frame. • Deflate the tires to half pressure and hang the bicycle off the ground. • Don't store near electric motors as ozone emissions may effect the rubber and paint. • Don't cover with plastic as "sweating" will result which may cause rusting. • Please notice that your bicycle warranty does not cover paint damage, rust, corrosion, dry rot or theft. 26 ©2010

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
©2010
BASIC MAINTENANCE
The following procedures will help you maintain your bicycle for years of enjoyable riding.
•
For painted frames, dust the surface and remove any loose dirt with a dry cloth. To clean, wipe with a damp cloth soaked in a mild
detergent mixture. Dry with a cloth and polish with car or furniture wax. Use soap and water to clean plas°c parts and rubber °res.
Chrome plated bikes should be wiped over with a rust preventa°ve fluid.
•
Store your bicycle under shelter. Avoid leaving it in the rain or exposed to corrosive materials.
•
Riding on the beach or in coastal areas exposes your bicycle to salt which is very corrosive. Wash your bicycle frequently and wipe or
spray all unpainted parts with an an°-rust treatment. Make sure wheel rims are dry so braking performance is not affected. Aſter rain,
dry your bicycle and apply an°-rust treatment. If the hub and bo±om bracket bearings of your bicycle have been submerged in water,
they should be taken out and re-greased. This will prevent accelerated bearing deteriora°on.
•
If paint has become scratched or chipped to the metal, use touch up paint to prevent rust. Clear nail polish can also be used as
a preventa°ve measure.
•
Regularly clean and lubricate all moving parts, °ghten components and make adjustments as required.
(Refer to Parts 4 and 5 of this manual for further details).
STORAGE
•
Keep your bicycle in a dry loca°on away from the weather and the sun.
Ultraviolet rays may cause paint to fade or rubber and plas°c parts to crack.
•
Before storing your bicycle for a long period of °me, clean and lubricate all components and wax the frame.
•
Deflate the °res to half pressure and hang the bicycle off the ground.
•
Don’t store near electric motors as ozone emissions may effect the rubber and paint.
•
Don’t cover with plas°c as “swea°ng” will result which may cause rus°ng.
•
Please no°ce that your bicycle warranty does not cover paint damage, rust, corrosion, dry rot or theſt.
BEFORE YOU RIDE
26