Seagate ST2000NM0001 Constellation ES SATA Product Manual
Seagate ST2000NM0001 Manual
View all Seagate ST2000NM0001 manuals
Add to My Manuals
Save this manual to your list of manuals |
Seagate ST2000NM0001 manual content summary:
- Seagate ST2000NM0001 | Constellation ES SATA Product Manual - Page 1
Product Manual Constellation® ES Serial ATA ST32000644NS ST31000524NS ST3500514NS 100516232 Rev. G February 2011 - Seagate ST2000NM0001 | Constellation ES SATA Product Manual - Page 2
in the United States and/or other countries. Constellation ES and SeaTools are either trademarks or registered trademarks of Seagate Technology LLC or one of its affiliated companies in the United States and/or other countries. All other trademarks or registered trademarks are the property of their - Seagate ST2000NM0001 | Constellation ES SATA Product Manual - Page 3
Vibration 19 3.10 Acoustics 19 3.11 Test for Prominent Discrete Tones (PDTs 20 Drive mounting 27 5.0 Serial ATA (SATA) interface 28 5.1 Hot-Plug compatibility 28 5.2 Serial ATA device plug connector pin definitions 29 5.3 Supported ATA commands 30 5.3.1 Identify Device command 32 5.3.2 Set - Seagate ST2000NM0001 | Constellation ES SATA Product Manual - Page 4
ii Constellation ES Serial ATA Product Manual, Rev. G - Seagate ST2000NM0001 | Constellation ES SATA Product Manual - Page 5
operation current profile 13 HDA temperature checkpoint 17 Attaching SATA cabling 26 Mounting dimensions-top, side and end view 27 Constellation ES Serial ATA Product Manual, Rev. G iii - Seagate ST2000NM0001 | Constellation ES SATA Product Manual - Page 6
- Seagate ST2000NM0001 | Constellation ES SATA Product Manual - Page 7
us/about/contact_us/ Available services include: Presales & Technical support Global Support Services telephone numbers & business hours Authorized Service Centers For information regarding Warranty Support, visit http://www.seagate.com/www/en-us/support/warranty_&_returns_assistance For information - Seagate ST2000NM0001 | Constellation ES SATA Product Manual - Page 8
performs a drive self-test that eliminates unnecessary drive returns. • Support for S.M.A.R.T. drive monitoring and reporting. • Supports latching SATA cables and connectors. • Worldwide Name (WWN) capability uniquely identifies the drive. 2 Constellation ES Serial ATA Product Manual, Rev. G - Seagate ST2000NM0001 | Constellation ES SATA Product Manual - Page 9
to set any jumpers or support. Serial ATA was designed to allow you to install a Serial ATA host adapter and Serial ATA disc drive connects each disc drive in a point- ATA. If two drives are attached on one Serial ATA host adapter downloaded from www.serialata.org. Constellation ES Serial ATA Product - Seagate ST2000NM0001 | Constellation ES SATA Product Manual - Page 10
the appropriate section of this manual. Table 1: Drive specifications summary Drive specification Formatted (512 bytes/ max) ATA data-transfer modes supported Cache buffer Weight: (maximum) Average latency Power-on to ready (sec max) Standby to ready (sec max) ST32000644NS 2TB 3,907,029,168 8 4 - Seagate ST2000NM0001 | Constellation ES SATA Product Manual - Page 11
. After submitting this information, the system will display the warranty information for your drive. 300,000 (25°C, 50% rel. humidity) (600,000 design life testing) Yes *One GB equals one billion bytes when referring to hard drive capacity. Accessible capacity may vary depending on operating - Seagate ST2000NM0001 | Constellation ES SATA Product Manual - Page 12
2TB 1TB 500GB Guaranteed sectors 3,907,029,168 1,953,525,168 976,773,168 Bytes per sector 512 *One GB equals one billion bytes when referring to hard drive 103) for additional information about 48bit addressing support of drives with capacities over 137GB. 3.3 Default logical Manual, Rev. G - Seagate ST2000NM0001 | Constellation ES SATA Product Manual - Page 13
meet the seek times represented in this manual. Physical seeks, regardless of mode (such as track-to-track and average), are expected to meet the noted values. However, due to the manner in which these drives are formatted, benchmark tests that include command overhead or measure logical - Seagate ST2000NM0001 | Constellation ES SATA Product Manual - Page 14
for the drives are listed in the table on page 9. Typical power measurements are based on an average of drives tested, under nominal drive accepts commands, but the drive is not spinning, and the servo and read/ write electronics are in power-down mode. 8 Constellation ES Serial ATA Product Manual - Seagate ST2000NM0001 | Constellation ES SATA Product Manual - Page 15
Table 2: 2000GB Drive DC power requirements Voltage Regulation Avg Idle Current * Advanced Idle Current * Idle_A Idle_B Idle_C Standby Transition Current * Idle_A (Active) 44 8.54 0.44 8.67 0.88 15.96 0.44 8.52 0.44 8.65 0.88 17.76 Constellation ES Serial ATA Product Manual, Rev. G 9 - Seagate ST2000NM0001 | Constellation ES SATA Product Manual - Page 16
Table 3: 1000GB Drive DC power requirements Voltage Regulation Avg Idle Current * Advanced Idle Current * Idle_A Idle_B Idle_C Standby Transition Current * Idle_A (Active) Idle_B 63 0.28 6.74 0.62 12.54 0.28 6.78 0.28 6.90 0.60 13.60 10 Constellation ES Serial ATA Product Manual, Rev. G - Seagate ST2000NM0001 | Constellation ES SATA Product Manual - Page 17
Table 4: 500GB Drive DC power requirements Voltage Regulation Avg Idle Current * Advanced Idle Current 72 0.46 10.62 0.21 5.82 0.21 5.89 0.48 12.26 *During periods of drive idle, some offline activity may occur according to the S.M.A.R.T. specification, which may increase acoustic and power - Seagate ST2000NM0001 | Constellation ES SATA Product Manual - Page 18
3.8.1.1 Typical current profiles 12 Constellation ES Serial ATA Product Manual, Rev. G - Seagate ST2000NM0001 | Constellation ES SATA Product Manual - Page 19
V line or an equivalent 15-ohm resistive load on the +5V line. • Using 12V power, the drive is expected to operate with a maximum of 120mV peak-to-peak square-wave injected noise at up to 10MHz. tolerance (including noise): 5V ± 5% 12V ±10% Constellation ES Serial ATA Product Manual, Rev. G 13 - Seagate ST2000NM0001 | Constellation ES SATA Product Manual - Page 20
setup program. The drive features the following • Active mode The drive is in Active mode set the standby timer, the drive can also enter Standby mode automatically after the drive drive leaves Sleep mode after it receives a Hard Reset or Soft Reset from the host. After receiving a reset, the drive - Seagate ST2000NM0001 | Constellation ES SATA Product Manual - Page 21
for tracking purposes Check Power Mode Command • Reports the current power state of the drive Identify Device Command • EPC Feature set supported flag • EPC Feature enabled flag is set if at least one Idle power condition timer is enabled Power Condition Log reports the following for each power - Seagate ST2000NM0001 | Constellation ES SATA Product Manual - Page 22
Set Power Condition State PowerChoice Supported Extended Power Condition Indentifiers Power Condition Identifiers 00H 01 - 80H 81H 82H 83H 84 - FEH FFH Power Condition Name Standby_z Reserved Idle_a Idle_b Idle_c Reserved All EPC Power Conditions 16 Constellation ES Serial ATA Product Manual - Seagate ST2000NM0001 | Constellation ES SATA Product Manual - Page 23
drive meets the operating specifications over a 41°F to 140°F (5°C to 60°C) drive the drive assumes the maximum drive degrade the drive MTBF place the drive in its the case temperature of the drive. b. Non-operating - drive is packaged in the shipping container designed by Seagate for use with drive - Seagate ST2000NM0001 | Constellation ES SATA Product Manual - Page 24
All shock specifications assume that the drive is mounted securely with the input shock applied at the drive mounting screws. Shock may be applied Operating shock These drives comply with the performance level that the drive can experience without 2TB models The nonoperating shock level that the drive - Seagate ST2000NM0001 | Constellation ES SATA Product Manual - Page 25
maximum vibration levels that the drive may experience while meeting the drive 10 Acoustics Drive acoustics are tests, the drive is oriented with the cover facing upward. Note. For seek mode tests, the drive 3.0 bels (max) *During periods of drive idle, some offline activity may occur according - Seagate ST2000NM0001 | Constellation ES SATA Product Manual - Page 26
representative host system, the drive operates without errors or degradation frequency environments Test Electrostatic MHz, 3 V/m, 50% pulse modulation @ 200 Hz ± 1 kV on AC mains, ± 0.5 kV on external I/O B ± 1 kV differential, ± 2 kV common, AC mains B 150 kHz to 80 MHz, 3 Manual, Rev. G - Seagate ST2000NM0001 | Constellation ES SATA Product Manual - Page 27
1015 bits read, max 0.73% (nominal power, 40°C case temperature) 300,000 cycles To determine the warranty for a specific drive, use a web browser to access the following web page: support.seagate.com/customer/warranty_validation.jsp Preventive maintenance From this page, click on the "Verify Your - Seagate ST2000NM0001 | Constellation ES SATA Product Manual - Page 28
compatibility Hard drives Drives are tested in a representative, end-user system by a Korean-recognized lab. • Family name: Constellation ES • Certificate number: STX-Constell-ES (B) Australian C-Tick (N176) If these models have the C-Tick marking, they comply with the Australia/New instructions - Seagate ST2000NM0001 | Constellation ES SATA Product Manual - Page 29
try one or more of the following corrective measures: • Reorient the receiving antenna. • Move the device to one side or Resolve Radio-Television Interference Problems. This booklet is . A new law, , effective July 2006. This drive is manufactured with components and materials Manual, Rev. G 23 - Seagate ST2000NM0001 | Constellation ES SATA Product Manual - Page 30
testing cannot duplicate every potential application environment. Users should use caution exposing any electronic components to uncontrolled chemical pollutants and corrosive chemicals as electronic drive sulfide-free alternatives. 24 Constellation ES Serial ATA Product Manual, Rev. G - Seagate ST2000NM0001 | Constellation ES SATA Product Manual - Page 31
computer. • Do not touch the connector pins or the printed circuit board. • Do not remove the factory-installed labels from the drive or cover them with additional labels. Removal voids the warranty. Some factory-installed labels contain information needed to service the drive. Other labels are used - Seagate ST2000NM0001 | Constellation ES SATA Product Manual - Page 32
no master/slave relationship because each drive is considered a master in a point-to-point relationship. If two drives are attached on one Serial ATA host adapter, the host . Constellation ES Serial ATA drives support latching SATA connectors. 26 Constellation ES Serial ATA Product Manual, Rev. G - Seagate ST2000NM0001 | Constellation ES SATA Product Manual - Page 33
four screws in the bottom-mounting holes. See Figure 5 for drive mounting dimensions. Follow these important mounting precautions when mounting the drive: • Allow a minimum clearance of 0.030 in (0.76mm) dimensions-top, side and end view Constellation ES Serial ATA Product Manual, Rev. G in mm 27 - Seagate ST2000NM0001 | Constellation ES SATA Product Manual - Page 34
(SATA) interface These drives use the industry-standard Serial ATA interface that supports FIS data transfers. It supports ATA programmed input/output Revision 2.6 specification. This specification can be downloaded from www.serialata.org. Caution: The drive motor must come to a complete stop ( - Seagate ST2000NM0001 | Constellation ES SATA Product Manual - Page 35
5V power 5V power 2nd mate P11 Ground or LED signal If grounded, drive does not use deferred spin P12 Ground 1st mate. P13 V12 P14 V12 rest of the power pins. 3. There are three power pins for each voltage. One pin from each voltage is used for pre-charge when installed in a blind-mate - Seagate ST2000NM0001 | Constellation ES SATA Product Manual - Page 36
lists Serial ATA standard commands that the drive supports. For a detailed description of the Supported ATA commands Command name Check Power Mode Device Configuration Freeze Lock Device Configuration Identify Device Configuration Restore Device Configuration Set Device Reset Download Manual, Rev. G - Seagate ST2000NM0001 | Constellation ES SATA Product Manual - Page 37
Set Password Security Unlock Seek Set Features Set Max Address Note: Individual Set Max Address commands are identified by the value placed in the Set Max Features register as defined to the right. Set Max Address Extended Set 30H 31H 34H 45H Constellation ES Serial ATA Product Manual, Rev. G 31 - Seagate ST2000NM0001 | Constellation ES SATA Product Manual - Page 38
set to zero. Parameters listed with an "x" are drive-specific or vary with the state of the drive. See Section 3.0 on page 4 for default parameter settings. The following commands contain drive Obsolete Firmware revision (8 ASCII character string, padded with blanks to end of string) Drive model - Seagate ST2000NM0001 | Constellation ES SATA Product Manual - Page 39
(268,435,455 sectors, 137GB). Drives with capacities over 137GB will have 0FFFFFFFh sets supported Command sets supported Command sets support extension (see note following this table) Command sets enabled Command sets enabled Command sets enable extension Ultra DMA support Manual, Rev. G 33 - Seagate ST2000NM0001 | Constellation ES SATA Product Manual - Page 40
Bit Word 84 0 SMART error logging is supported. 1 SMART self-test is supported. 2 Media serial number is supported. 3 Media Card Pass Through Command feature set is supported. 4 Streaming feature set is supported. 5 GPL feature set is supported. 6 WRITE DMA FUA EXT and WRITE MULTIPLE - Seagate ST2000NM0001 | Constellation ES SATA Product Manual - Page 41
supported. 1 Ultra DMA mode 1 is supported. 2 Ultra DMA mode 2 is supported. 3 Ultra DMA mode 3 is supported. 4 Ultra DMA mode 4 is supported. 5 Ultra DMA mode 5 is supported. 6 Ultra DMA mode 6 is supported 6 is currently active. Constellation ES Serial ATA Product Manual, Rev. G 35 - Seagate ST2000NM0001 | Constellation ES SATA Product Manual - Page 42
command This command controls the implementation of various features that the drive supports. When the drive receives this command, it sets BSY, checks the contents of the Features register, clears BSY and the features are as indicated above. 36 Constellation ES Serial ATA Product Manual, Rev. G - Seagate ST2000NM0001 | Constellation ES SATA Product Manual - Page 43
implementation, see the Draft ATA-5 Standard. SeaTools diagnostic software activates a built-in drive self-test (DST S.M.A.R.T. command for D4H) that eliminates unnecessary drive returns. The diagnostic software ships with all new drives and is also available at: http://seatools.seagate.com. This - Seagate ST2000NM0001 | Constellation ES SATA Product Manual - Page 44
38 Constellation ES Serial ATA Product Manual, Rev. G - Seagate ST2000NM0001 | Constellation ES SATA Product Manual - Page 45
21 areal density 2, 6 ATA commands 30 Australia/New Zealand Standard AS/NZ CISPR22 22 Australian Communication noise 13 Conducted RF immunity 20 Configuring the drive 25 connectors 26 Corrosive environment 24 CSA60950-1 Set 30 Device Reset 30 dimensions 27 disc surface 8 Download Manual, Rev. G 39 - Seagate ST2000NM0001 | Constellation ES SATA Product Manual - Page 46
slave 3 maximum start current 9, 10, 11 mounting 27 mounting screws 18 mounting the drive 25 N noise 13 nominal power 7 non-operating temperature 17 Nonoperating shock 18 Nonoperating S.M.A.R.T. Execute Offline 31 S.M.A.R.T. implementation 30 Constellation ES Serial ATA Product Manual, Rev. G - Seagate ST2000NM0001 | Constellation ES SATA Product Manual - Page 47
3 Servo electronics 8 servo electronics 8 Set Features 31 Set Max Address 31 Set Max Address Extended 31 Set Multiple Mode 31 shipping container 17 Shock 22 support services 1 Surge immunity 20 T technical support services 1 temperature 7, 17 limits 17 non-operating 17 Test for Manual, Rev. G 41 - Seagate ST2000NM0001 | Constellation ES SATA Product Manual - Page 48
42 Constellation ES Serial ATA Product Manual, Rev. G - Seagate ST2000NM0001 | Constellation ES SATA Product Manual - Page 49
- Seagate ST2000NM0001 | Constellation ES SATA Product Manual - Page 50
Seagate Technology LLC 920 Disc Drive, Scotts Valley, California 95066-4544, USA Publication Number: 100516232, Rev. G
Product Manual
Constellation
®
ES Serial ATA
100516232
Rev. G
February 2011
ST32000644NS
ST31000524NS
ST3500514NS