Seagate ST240HM000 Seagate 600 SSD Product Manual

Seagate ST240HM000 Manual

Seagate ST240HM000 manual content summary:

  • Seagate ST240HM000 | Seagate 600 SSD Product Manual - Page 1
    Product Manual Seagate® 600 SSD Standard 2.5" 7mm Limited Warranty With Media Usage models ST480HM000 ST240HM000 ST120HM000 Standard 2.5" 5mm Limited Warranty With Media Usage models ST480HM001 ST240HM001 ST120HM001 100722309 Rev. B May 2013
  • Seagate ST240HM000 | Seagate 600 SSD Product Manual - Page 2
    in any form without written permission of Seagate Technology LLC. Call 877-PUB-TEK1 (877-782-8351) to request permission. When referring to drive capacity, one gigabyte, or GB, equals one billion bytes and one terabyte, or TB, equals one trillion bytes. Your computer's operating system may
  • Seagate ST240HM000 | Seagate 600 SSD Product Manual - Page 3
    compatibility 20 4.2 Serial ATA device plug connector pin definitions 20 4.3 Supported ATA commands 22 4.3.1 Identify Device command 24 4.3.2 Set Features command 30 4.3.3 S.M.A.R.T. commands 31 4.3.4 SSD Percentage Endurance Remaining Indicator 31 iii Seagate 600 SSD Product Manual, Rev. B
  • Seagate ST240HM000 | Seagate 600 SSD Product Manual - Page 4
    FIGURES Figure 1. Figure 2. Figure 3. Figure 4. Figure 5. Typical 5V Startup and Operation Current Profile 10 Attaching SATA cabling 16 Mounting configuration dimensions (7mm models 17 Mounting configuration dimensions (5mm models 18 Air flow 19 SEAGATE 600 SSD PRODUCT MANUAL, REV. B IV
  • Seagate ST240HM000 | Seagate 600 SSD Product Manual - Page 5
    Seagate Technology Support Services For information regarding online support and services, visit http://www.seagate.com/about/contact-us/technical-support/ Available services include: • Presales & Technical support • Global Support Services telephone numbers & business hours • Authorized Service
  • Seagate ST240HM000 | Seagate 600 SSD Product Manual - Page 6
    This manual describes the functional, mechanical and interface specifications for the following Seagate® 600 SSD model drives: 2.5" Limited Warranty With Media, 7mm Model ST480HM000 ST240HM000 ST120HM000 2.5" Limited Warranty With Media, 5mm Model ST480HM001 ST240HM001 ST120HM001 These drives
  • Seagate ST240HM000 | Seagate 600 SSD Product Manual - Page 7
    Seagate Technology Support Services" on page 1. 2.1 SPECIFICATION SUMMARY TABLES The specifications listed in the following table is for quick re ference. For details on specification measurement or definition , see the appropriate section of this manual. Table 1 Drive ST240HM000 ST240HM001 240
  • Seagate ST240HM000 | Seagate 600 SSD Product Manual - Page 8
    ST240HM001 ST120HM000 20-2000 Hz: 11.08 Grms 1 LBA per 1016 bits read 0.58% 3-Year Limited Warranty With Media Usage 25,000 Yes ST120HM001 *One GB equals one billion bytes when referring to drive additional information about 48-bit addressing support of drives with capacities over 137GB. 2.3
  • Seagate ST240HM000 | Seagate 600 SSD Product Manual - Page 9
    Supported Maximum Burst Transfer Rate Hot Plug Support Native Command Queuing Support Trim Support drive, using IOMeter 2006.7.27. [2] Testing performed at Queue Depth = 32, Randomly Preconditioned drive driver limitations. It is not the intent of this manual SEAGATE 600 SSD PRODUCT MANUAL, REV. B 5
  • Seagate ST240HM000 | Seagate 600 SSD Product Manual - Page 10
    , ST240HM000 & ST120HM000 ST480HM001, ST240HM001 & ST120HM001 7.00 mm (0.276 in) 5.00 mm (0.197 in) 70.10 mm (2.760 in) 100.45 mm (3.955 in) 77 g (0.170lb) 67 g (0.148 lb) 2.6 TIME TO READY Power-on to Ready (sec) 480GB 240GB
  • Seagate ST240HM000 | Seagate 600 SSD Product Manual - Page 11
    2.02 0.46 2.31 1.44 7.20 0.44 2.18 0.45 2.20 1.02 5.10 0.52 2.61 0.60 2.99 1.50 7.50 *During periods of drive idle, some offline activity may occur according to the S.M.A.R.T. specification, which may increase power to operational levels. SEAGATE 600 SSD PRODUCT MANUAL, REV. B 7
  • Seagate ST240HM000 | Seagate 600 SSD Product Manual - Page 12
    (sequential write): Typical DC Maximum DC Maximum DC (peak) ST240HM000, ST240HM001 +5V +/- 5% 0.22 0.10 0.95 0.52 0.38 (6.0Gb) drive idle, some offline activity may occur according to the S.M.A.R.T. specification, which may increase power to operational levels. SEAGATE 600 SSD PRODUCT MANUAL
  • Seagate ST240HM000 | Seagate 600 SSD Product Manual - Page 13
    2.54 0.56 2.18 1.42 7.10 0.43 2.30 0.44 2.34 0.92 4.40 0.53 2.64 0.56 2.90 1.28 6.40 *During periods of drive idle, some offline activity may occur according to the S.M.A.R.T. specification, which may increase power to operational levels. SEAGATE 600 SSD PRODUCT MANUAL, REV. B 9
  • Seagate ST240HM000 | Seagate 600 SSD Product Manual - Page 14
    2.7.2.1 Typical current profiles Figure 1. Typical 5V Startup and Operation Current Profile SEAGATE 600 SSD PRODUCT MANUAL, REV. B 10
  • Seagate ST240HM000 | Seagate 600 SSD Product Manual - Page 15
    Gs based on a half-sine shock pulse of 0.5ms duration. 2.8.6 Vibration All vibration specifications assume that the drive is mounted securely with the input vibration applied at the drive mounting screws. Vibration may be applied in the X, Y or Z axis. SEAGATE 600 SSD PRODUCT MANUAL, REV. B 11
  • Seagate ST240HM000 | Seagate 600 SSD Product Manual - Page 16
    nonoperating vibration levels that the drive may experience without incurring physical modulation @ 200 Hz Electrical fast transient ± 1 kV on AC mains, ± 0.5 kV on external I/O B Surge immunity ± 1 kV differential, ± 2 kV common, AC mains B Conducted SEAGATE 600 SSD PRODUCT MANUAL, REV. B 12
  • Seagate ST240HM000 | Seagate 600 SSD Product Manual - Page 17
    retention is not an issue with power applied to the SSD. The SSD drive contains firmware and hardware features that can monitor and refresh memory cells when power and endurance usage of the drive: 36 months or 73 (max capacity) TBW whichever comes first. SEAGATE 600 SSD PRODUCT MANUAL, REV. B 13
  • Seagate ST240HM000 | Seagate 600 SSD Product Manual - Page 18
    compatibility Drives that Drives are tested in representative end-user systems. Although CE-marked Seagate drives these drives have the external device). As such, each drive instructions one or more of the following corrective measures: • Reorient the receiving antenna. • Move the device to one Problems
  • Seagate ST240HM000 | Seagate 600 SSD Product Manual - Page 19
    threshold defined by the China RoHS MCV Standard. 2.13 CORROSIVE ENVIRONMENT Seagate electronic drive components pass ac celerated corrosion testing equivalent to 10 years exposure to by replacing materials near circuitry with sulfide-free alternatives. SEAGATE 600 SSD PRODUCT MANUAL, REV. B 15
  • Seagate ST240HM000 | Seagate 600 SSD Product Manual - Page 20
    cables, you can connect the drive as illustrated in 2. Signal connector Power connector Signal cable Figure 2. Power cable Attaching SATA cabling Each cable is keyed to ensure correct orientation. Seagate 600 SSD drives support latching SATA connectors. SEAGATE 600 SSD PRODUCT MANUAL, REV. B 16
  • Seagate ST240HM000 | Seagate 600 SSD Product Manual - Page 21
    ± 0.45 in-lb). Refer to 4 for detailed mounting configuration dimensions. See Section 3.4, "Drive mounting." Weight: 7mm models 5mm models 0.170 pounds 0.148 pounds 77 grams 67 grams Note org. Figure 3. Mounting configuration dimensions (7mm models) SEAGATE 600 SSD PRODUCT MANUAL, REV. B 17
  • Seagate ST240HM000 | Seagate 600 SSD Product Manual - Page 22
    Note. These dimensions conform to the Small Form Factor Standard documented in SFF-8120 and SFF-8146 found at www.sffcommittee.org. Figure 4. Mounting configuration dimensions (5mm models) SEAGATE 600 SSD PRODUCT MANUAL, REV. B 18
  • Seagate ST240HM000 | Seagate 600 SSD Product Manual - Page 23
    or below the temperatures specified in Section 2.8.1 in which case the drive should be oriented, or air flow directed, so that the least are shown in figure 5. The air-flow patterns are created by one or more fans, either forcing or drawing air as shown in . SEAGATE 600 SSD PRODUCT MANUAL, REV. B 19
  • Seagate ST240HM000 | Seagate 600 SSD Product Manual - Page 24
    connectors. [2] The three V33 pins are unused but connected together on the drive. They can be used for a drive-in-place detection. [3] The three V12 pins are unused but connected together on the drive. They can be used for a drive-in-place detection. SEAGATE 600 SSD PRODUCT MANUAL, REV. B 20
  • Seagate ST240HM000 | Seagate 600 SSD Product Manual - Page 25
    Reserved for Seagate use. P9 Optional Leave unconnected. Notes: [1] Ground pins 3 and 4 mate first on micro SATA backplane connectors [2] The two V33 pins are unused but connected together on the drive. They can be used for a drive-in-place detection. SEAGATE 600 SSD PRODUCT MANUAL, REV. B 21
  • Seagate ST240HM000 | Seagate 600 SSD Product Manual - Page 26
    commands that the drive supports. For a Set Max Address Set Max Address Extended COMMAND CODE (IN HEX) E5H 06H 92H E7H EAH ECH E3H E1H 91H 00H E4H C8H 25H 60H 2FH C4H 29H F8H 27H 20H 24H 40H 42H B4H/0012H B4H/0020H B4H/0000H F6H F3H F4H F5H F1H F2H EFH F9H 37H SEAGATE 600 SSD PRODUCT MANUAL
  • Seagate ST240HM000 | Seagate 600 SSD Product Manual - Page 27
    COMMAND NAME Set Multiple Mode Sleep S.M.A.R.T. Disable Operations S.M.A.R.T. Enable Operations S.M.A.R.T. Execute Offline S.M.A.R.T. Read Data S.M.A.R.T. Read Log Sector S.M.A.R.T. / DAH B0H / D6H E2H E0H E8H CAH 35H 3DH 61H 3FH C5H 39H CEH 30H 34H 45H SEAGATE 600 SSD PRODUCT MANUAL, REV. B 23
  • Seagate ST240HM000 | Seagate 600 SSD Product Manual - Page 28
    set to zero. Parameters listed with an "x" are drive-specific or vary with the state of the drive. see Sectoi n 2.0 on page 3 for default parameter settings. The following commands contain drive feature set options Capabilities - Standby Timer, IORDY Support, SEAGATE 600 SSD PRODUCT MANUAL, REV. B 24
  • Seagate ST240HM000 | Seagate 600 SSD Product Manual - Page 29
    are required for drives that support the 48-bit addressing feature. Maximum value: 0000FFFFFFFFFFFFh Reserved for Streaming Command Set Maximum number of sets supported Commands and feature sets supported or enabled Reserved for expanded supported and enabled settings SEAGATE 600 SSD PRODUCT MANUAL,
  • Seagate ST240HM000 | Seagate 600 SSD Product Manual - Page 30
    , 82-87 and 119-120 of the Identify Drive data. Description (if bit is set to 1) Bit Word 49 8 DMA Supported 9 Shall be set to 1 10 IORDY May be disabled 11 IORDY supported 13 Standby Timer Values supported Bit Word 50 14 Shall be set to 1 SEAGATE 600 SSD PRODUCT MANUAL, REV. B 26
  • Seagate ST240HM000 | Seagate 600 SSD Product Manual - Page 31
    -ahead is supported Release interrupt is supported SERVICE interrupt is supported DEVICE RESET command is supported HPA feature set is supported Obsolete WRITE BUFFER command is supported READ BUFFER command is supported NOP command is supported Obsolete SEAGATE 600 SSD PRODUCT MANUAL, REV. B 27
  • Seagate ST240HM000 | Seagate 600 SSD Product Manual - Page 32
    CFA feature set is supported SET FEATURES subcommand is required to spin-up after power-up The 48-bit Address features set is supported The DCO feature set is supported FLUSH CACHE command supported FLUSH CACHE EXT command supported Words 119 ... 120 are valid SEAGATE 600 SSD PRODUCT MANUAL, REV
  • Seagate ST240HM000 | Seagate 600 SSD Product Manual - Page 33
    Shall be set to one Shall be cleared to zero Word 120 WRITE UNCORRECTABLE EXT command is supported READ LOG DMA EXT and WRITE LOG DMA EXT commands are supported DOWNLOAD MICROCODE command with mode 3 is supported Shall be set to one Shall be cleared to zero SEAGATE 600 SSD PRODUCT MANUAL, REV
  • Seagate ST240HM000 | Seagate 600 SSD Product Manual - Page 34
    drive supports. When the drive receives this command, it sets Set transfer mode (based on value in Sector Count register). Sector Count register values: 00H Set PIO mode to default (PIO mode 2). 01H Set 06H Software Settings Preservation Disable transitions 06H Software Settings Preservation Enable
  • Seagate ST240HM000 | Seagate 600 SSD Product Manual - Page 35
    self-test (DST S.M.A.R.T. command for D4H) that eliminates unnecessary drive returns. The diagnostic software ships with all new drives and is also available at: http://www.seagate.com/support/downloads/seatools/. This drive is shipped with S.M.A.R.T. features disabled. You must have a recent BIOS
  • Seagate ST240HM000 | Seagate 600 SSD Product Manual - Page 36
    RF immunity 12 Configuring the drive 16 connectors 16 Corrosive environment 15 CSA60950-1 14 cycles 13 Cylinders 4 D Data Set Management with Trim Support 22 data-transfer rates 2 configuration dimensions 17, 18 mounting screws 11 mounting the drive 16 SEAGATE 600 SSD PRODUCT MANUAL, REV. B 32
  • Seagate ST240HM000 | Seagate 600 SSD Product Manual - Page 37
    Freeze Lock Ext 22 Sanitize Status Ext 22 SATA 20 screws 11 Seagate Technology Support Services 1 Sectors per track 4 Security Disable Password 22 Security Erase Prepare 22 Security Erase Unit 22 Security Freeze 22 Security Set Password 22 Security Unlock 22 Serial ATA (SATA) interface 20 serial ATA
  • Seagate ST240HM000 | Seagate 600 SSD Product Manual - Page 38
    Write Log Extended 23 Write Multiple 23 Write Multiple Extended 23 Write Multiple FUA Extended 23 Write Sectors 23 Write Sectors Extended 23 write uncorrectable 23 INDEX SEAGATE 600 SSD PRODUCT MANUAL, REV. B 34
  • Seagate ST240HM000 | Seagate 600 SSD Product Manual - Page 39
    Boulevard, Cupertino, California 95014, United States, 408-658-1000 ASIA/PACIFIC Seagate Singapore International Headquarters Pte. Ltd. 7000 Ang Mo Kio Avenue 5, Singapore 569877, 65-6485-3888 EUROPE, MIDDLE EAST AND AFRICA Seagate Technology SAS 16-18 rue du Dôme, 92100 Boulogne-Billancourt, France
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39

Product Manual
Seagate
®
600 SSD
100722309
Rev. B
May 2013
Standard 2.5” 7mm
Limited Warranty With
Media Usage models
ST480HM000
ST240HM000
ST120HM000
Standard 2.5” 5mm
Limited Warranty With
Media Usage models
ST480HM001
ST240HM001
ST120HM001