Seagate ST240HM001 Seagate 600 SSD Product Manual

Seagate ST240HM001 Manual

Seagate ST240HM001 manual content summary:

  • Seagate ST240HM001 | Seagate 600 SSD Product Manual - Page 1
    Product Manual Seagate® 600 SSD Standard 2.5" 7mm Limited Warranty With Media Usage models ST480HM000 ST240HM000 ST120HM000 Standard 2.5" 5mm Limited Warranty With Media Usage models ST480HM001 ST240HM001 ST120HM001 100722309 Rev. B May 2013
  • Seagate ST240HM001 | Seagate 600 SSD Product Manual - Page 2
    Seagate Technology LLC. Call 877-PUB-TEK1 (877-782-8351) to request permission. When referring to drive capacity, one gigabyte, or GB, equals one billion bytes and one terabyte, or TB, equals one .bis.doc.gov), and controlled for import and use outside of the U.S. Seagate reserves the right to change
  • Seagate ST240HM001 | Seagate 600 SSD Product Manual - Page 3
    compatibility 20 4.2 Serial ATA device plug connector pin definitions 20 4.3 Supported ATA commands 22 4.3.1 Identify Device command 24 4.3.2 Set Features command 30 4.3.3 S.M.A.R.T. commands 31 4.3.4 SSD Percentage Endurance Remaining Indicator 31 iii Seagate 600 SSD Product Manual, Rev. B
  • Seagate ST240HM001 | Seagate 600 SSD Product Manual - Page 4
    FIGURES Figure 1. Figure 2. Figure 3. Figure 4. Figure 5. Typical 5V Startup and Operation Current Profile 10 Attaching SATA cabling 16 Mounting configuration dimensions (7mm models 17 Mounting configuration dimensions (5mm models 18 Air flow 19 SEAGATE 600 SSD PRODUCT MANUAL, REV. B IV
  • Seagate ST240HM001 | Seagate 600 SSD Product Manual - Page 5
    recovery services, visit http://www.seagate.com/services-software/data-recovery-services/ For Seagate OEM and Distribution partner portal, visit: http://www.seagate.com/partners/ For Seagate reseller portal, visit: http://www.seagate.com/partners/my-spp-dashboard/ Seagate 600 SSD Product Manual
  • Seagate ST240HM001 | Seagate 600 SSD Product Manual - Page 6
    This manual describes the functional, mechanical and interface specifications for the following Seagate® 600 SSD model drives: 2.5" Limited Warranty With Media, 7mm Model ST480HM000 ST240HM000 ST120HM000 2.5" Limited Warranty With Media, 5mm Model ST480HM001 ST240HM001 ST120HM001 These drives
  • Seagate ST240HM001 | Seagate 600 SSD Product Manual - Page 7
    See "Seagate Technology Support Services" on page 1. 2.1 SPECIFICATION SUMMARY TABLES The specifications listed in the following table is for quick re ference. For details on specification measurement or definition , see the appropriate section of this manual. Table 1 Drive specifications summary
  • Seagate ST240HM001 | Seagate 600 SSD Product Manual - Page 8
    Device command" (words 60-61 and 100-103) for additional information about 48-bit addressing support of drives with capacities over 137GB. 2.3 DEFAULT LOGICAL GEOMETRY FOR ATA BASED SYSTEMS Cylinders 16,383 Read/write heads 16 Sectors per track 63 SEAGATE 600 SSD PRODUCT MANUAL, REV. B 4
  • Seagate ST240HM001 | Seagate 600 SSD Product Manual - Page 9
    Speeds Supported Maximum Burst Transfer Rate Hot Plug Support Native Command Queuing Support Trim Support 480GB models 240GB models host adapter, operating system, or driver limitations. It is not the intent of this manual to cover all possible causes of . SEAGATE 600 SSD PRODUCT MANUAL, REV. B 5
  • Seagate ST240HM001 | Seagate 600 SSD Product Manual - Page 10
    ST480HM000, ST240HM000 & ST120HM000 ST480HM001, ST240HM001 & ST120HM001 7.00 mm (0.276 in) 5.00 mm (0.197 in) 70.10 mm (2.760 in) 100.45 mm (3.955 in) 77 g (0.170lb) 67 g (0.148 lb) 2.6 TIME TO READY Power-on to Ready (sec) 480GB 240GB
  • Seagate ST240HM001 | Seagate 600 SSD Product Manual - Page 11
    2.02 0.46 2.31 1.44 7.20 0.44 2.18 0.45 2.20 1.02 5.10 0.52 2.61 0.60 2.99 1.50 7.50 *During periods of drive idle, some offline activity may occur according to the S.M.A.R.T. specification, which may increase power to operational levels. SEAGATE 600 SSD PRODUCT MANUAL, REV. B 7
  • Seagate ST240HM001 | Seagate 600 SSD Product Manual - Page 12
    240GB Current (sequential write): Typical DC Maximum DC Maximum DC (peak) ST240HM000, ST240HM001 +5V +/- 5% 0.22 0.10 0.95 0.52 0.38 drive idle, some offline activity may occur according to the S.M.A.R.T. specification, which may increase power to operational levels. SEAGATE 600 SSD PRODUCT MANUAL
  • Seagate ST240HM001 | Seagate 600 SSD Product Manual - Page 13
    2.54 0.56 2.18 1.42 7.10 0.43 2.30 0.44 2.34 0.92 4.40 0.53 2.64 0.56 2.90 1.28 6.40 *During periods of drive idle, some offline activity may occur according to the S.M.A.R.T. specification, which may increase power to operational levels. SEAGATE 600 SSD PRODUCT MANUAL, REV. B 9
  • Seagate ST240HM001 | Seagate 600 SSD Product Manual - Page 14
    2.7.2.1 Typical current profiles Figure 1. Typical 5V Startup and Operation Current Profile SEAGATE 600 SSD PRODUCT MANUAL, REV. B 10
  • Seagate ST240HM001 | Seagate 600 SSD Product Manual - Page 15
    is defined as the drive's internal temperature as reported by SMART attribute 194 for operation or the drive case temperature for drive is mounted securely with the input vibration applied at the drive mounting screws. Vibration may be applied in the X, Y or Z axis. SEAGATE 600 SSD PRODUCT MANUAL
  • Seagate ST240HM001 | Seagate 600 SSD Product Manual - Page 16
    representative host system, the drive operates without errors or degradation in performance @ 200 Hz Electrical fast transient ± 1 kV on AC mains, ± 0.5 kV on external I/O B Surge immunity ± 1 kV differential, ± 2 kV common, AC mains B Conducted SEAGATE 600 SSD PRODUCT MANUAL, REV. B 12
  • Seagate ST240HM001 | Seagate 600 SSD Product Manual - Page 17
    read error rate firmware and hardware features that can monitor and refresh memory cells when power is applied. [2] Limited Warranty With Media Usage: This warranty is based on the shorter of term and endurance usage of the drive: 36 months or 73 (max capacity) TBW whichever comes first. SEAGATE 600
  • Seagate ST240HM001 | Seagate 600 SSD Product Manual - Page 18
    as an external device). As such, each drive is considered the manufacturer's instructions, may Problems. This booklet is available from the Superintendent of Documents, U.S. Government Printing Office, Washington, DC 20402. Refer to publication number 004-000-00345-4. SEAGATE 600 SSD PRODUCT MANUAL
  • Seagate ST240HM001 | Seagate 600 SSD Product Manual - Page 19
    contains information mandated by China's "Marking Requirements for Control of Pollution Caused by Electronic Information Products" Standard. MCV Standard. 2.13 CORROSIVE ENVIRONMENT Seagate electronic drive components pass ac celerated corrosion testing SEAGATE 600 SSD PRODUCT MANUAL, REV. B 15
  • Seagate ST240HM001 | Seagate 600 SSD Product Manual - Page 20
    cables, you can connect the drive as illustrated in 2. Signal connector Power connector Signal cable Figure 2. Power cable Attaching SATA cabling Each cable is keyed to ensure correct orientation. Seagate 600 SSD drives support latching SATA connectors. SEAGATE 600 SSD PRODUCT MANUAL, REV. B 16
  • Seagate ST240HM001 | Seagate 600 SSD Product Manual - Page 21
    ± 0.45 in-lb). Refer to 4 for detailed mounting configuration dimensions. See Section 3.4, "Drive mounting." Weight: 7mm models 5mm models 0.170 pounds 0.148 pounds 77 grams 67 grams Note org. Figure 3. Mounting configuration dimensions (7mm models) SEAGATE 600 SSD PRODUCT MANUAL, REV. B 17
  • Seagate ST240HM001 | Seagate 600 SSD Product Manual - Page 22
    Note. These dimensions conform to the Small Form Factor Standard documented in SFF-8120 and SFF-8146 found at www.sffcommittee.org. Figure 4. Mounting configuration dimensions (5mm models) SEAGATE 600 SSD PRODUCT MANUAL, REV. B 18
  • Seagate ST240HM001 | Seagate 600 SSD Product Manual - Page 23
    or below the temperatures specified in Section 2.8.1 in which case the drive should be oriented, or air flow directed, so that the least are shown in figure 5. The air-flow patterns are created by one or more fans, either forcing or drawing air as shown in . SEAGATE 600 SSD PRODUCT MANUAL, REV. B 19
  • Seagate ST240HM001 | Seagate 600 SSD Product Manual - Page 24
    connectors. [2] The three V33 pins are unused but connected together on the drive. They can be used for a drive-in-place detection. [3] The three V12 pins are unused but connected together on the drive. They can be used for a drive-in-place detection. SEAGATE 600 SSD PRODUCT MANUAL, REV. B 20
  • Seagate ST240HM001 | Seagate 600 SSD Product Manual - Page 25
    Reserved for Seagate use. P9 Optional Leave unconnected. Notes: [1] Ground pins 3 and 4 mate first on micro SATA backplane connectors [2] The two V33 pins are unused but connected together on the drive. They can be used for a drive-in-place detection. SEAGATE 600 SSD PRODUCT MANUAL, REV. B 21
  • Seagate ST240HM001 | Seagate 600 SSD Product Manual - Page 26
    that the drive supports. For a Set Features Set Max Address Set Max Address Extended COMMAND CODE (IN HEX) E5H 06H 92H E7H EAH ECH E3H E1H 91H 00H E4H C8H 25H 60H 2FH C4H 29H F8H 27H 20H 24H 40H 42H B4H/0012H B4H/0020H B4H/0000H F6H F3H F4H F5H F1H F2H EFH F9H 37H SEAGATE 600 SSD PRODUCT MANUAL
  • Seagate ST240HM001 | Seagate 600 SSD Product Manual - Page 27
    COMMAND NAME Set Multiple Mode Sleep S.M.A.R.T. Disable Operations S.M.A.R.T. Enable Operations S.M.A.R.T. Execute Offline S.M.A.R.T. Read Data S.M.A.R.T. Read Log Sector S.M.A.R.T. / DAH B0H / D6H E2H E0H E8H CAH 35H 3DH 61H 3FH C5H 39H CEH 30H 34H 45H SEAGATE 600 SSD PRODUCT MANUAL, REV. B 23
  • Seagate ST240HM001 | Seagate 600 SSD Product Manual - Page 28
    set to zero. Parameters listed with an "x" are drive-specific or vary with the state of the drive. see Sectoi n 2.0 on page 3 for default parameter settings. The following commands contain drive Firmware set options Capabilities - Standby Timer, IORDY Support SEAGATE 600 SSD PRODUCT MANUAL, REV. B 24
  • Seagate ST240HM001 | Seagate 600 SSD Product Manual - Page 29
    Reserved for expanded supported and enabled settings SEAGATE 600 SSD PRODUCT MANUAL, REV. B VALUE 0078H 0078H 0100H 0000H 0000H 001FH 870EH 0006H 0056H 0040H 01F0H 0029H 746BH 7401H 4163H 7469H B401H 4163H 407FH 0004H 0000H 0000H FFFEH 0000H 0000H 0000H 480GB model = 937,703,088 240GB model = 468
  • Seagate ST240HM001 | Seagate 600 SSD Product Manual - Page 30
    , 82-87 and 119-120 of the Identify Drive data. Description (if bit is set to 1) Bit Word 49 8 DMA Supported 9 Shall be set to 1 10 IORDY May be disabled 11 IORDY supported 13 Standby Timer Values supported Bit Word 50 14 Shall be set to 1 SEAGATE 600 SSD PRODUCT MANUAL, REV. B 26
  • Seagate ST240HM001 | Seagate 600 SSD Product Manual - Page 31
    -ahead is supported Release interrupt is supported SERVICE interrupt is supported DEVICE RESET command is supported HPA feature set is supported Obsolete WRITE BUFFER command is supported READ BUFFER command is supported NOP command is supported Obsolete SEAGATE 600 SSD PRODUCT MANUAL, REV. B 27
  • Seagate ST240HM001 | Seagate 600 SSD Product Manual - Page 32
    command is supported Shall be set to one Shall be cleared to zero Word 84 SMART error logging is supported SMART self-test is supported Media serial number is supported Media Card Pass Through Command feature set is supported Streaming feature set is supported GPL feature set is supported WRITE DMA
  • Seagate ST240HM001 | Seagate 600 SSD Product Manual - Page 33
    Shall be set to one Shall be cleared to zero Word 120 WRITE UNCORRECTABLE EXT command is supported READ LOG DMA EXT and WRITE LOG DMA EXT commands are supported DOWNLOAD MICROCODE command with mode 3 is supported Shall be set to one Shall be cleared to zero SEAGATE 600 SSD PRODUCT MANUAL, REV
  • Seagate ST240HM001 | Seagate 600 SSD Product Manual - Page 34
    command controls the implementation of various features that the drive supports. When the drive receives this command, it sets BSY, checks the contents of the Features regis ter, clears BSY and generates an interrupt. If the value in the register does not represent a feature that the drive supports
  • Seagate ST240HM001 | Seagate 600 SSD Product Manual - Page 35
    Endurance Remaining Indicator An application can interrogate the drive through the host to determine an estimate of the percentage of device life that is remaining. Seagate SeaTools diagnostic software has the capability to report the indicator value. SEAGATE 600 SSD PRODUCT MANUAL, REV. B 31
  • Seagate ST240HM001 | Seagate 600 SSD Product Manual - Page 36
    RF immunity 12 Configuring the drive 16 connectors 16 Corrosive environment 15 CSA60950-1 14 cycles 13 Cylinders 4 D Data Set Management with Trim Support 22 data-transfer rates 2 configuration dimensions 17, 18 mounting screws 11 mounting the drive 16 SEAGATE 600 SSD PRODUCT MANUAL, REV. B 32
  • Seagate ST240HM001 | Seagate 600 SSD Product Manual - Page 37
    Sector 23 S.M.A.R.T. Return Status 23 SEAGATE 600 SSD PRODUCT MANUAL, REV. B INDEX S.M.A.R.T. Write Log sector 23 Safety certification 14 Sanitize Block Erase 22 Sanitize Freeze Lock Ext 22 Sanitize Status Ext 22 SATA 20 screws 11 Seagate Technology Support Services 1 Sectors per track 4 Security
  • Seagate ST240HM001 | Seagate 600 SSD Product Manual - Page 38
    Write Log Extended 23 Write Multiple 23 Write Multiple Extended 23 Write Multiple FUA Extended 23 Write Sectors 23 Write Sectors Extended 23 write uncorrectable 23 INDEX SEAGATE 600 SSD PRODUCT MANUAL, REV. B 34
  • Seagate ST240HM001 | Seagate 600 SSD Product Manual - Page 39
    Boulevard, Cupertino, California 95014, United States, 408-658-1000 ASIA/PACIFIC Seagate Singapore International Headquarters Pte. Ltd. 7000 Ang Mo Kio Avenue 5, Singapore 569877, 65-6485-3888 EUROPE, MIDDLE EAST AND AFRICA Seagate Technology SAS 16-18 rue du Dôme, 92100 Boulogne-Billancourt, France
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39

Product Manual
Seagate
®
600 SSD
100722309
Rev. B
May 2013
Standard 2.5” 7mm
Limited Warranty With
Media Usage models
ST480HM000
ST240HM000
ST120HM000
Standard 2.5” 5mm
Limited Warranty With
Media Usage models
ST480HM001
ST240HM001
ST120HM001