Seagate ST3000DM001 Barracuda 7200.9 SATA Product Manual
Seagate ST3000DM001 Manual
View all Seagate ST3000DM001 manuals
Add to My Manuals
Save this manual to your list of manuals |
Seagate ST3000DM001 manual content summary:
- Seagate ST3000DM001 | Barracuda 7200.9 SATA Product Manual - Page 1
Product Manual Barracuda® 7200.9 Serial ATA ST3160811AS ST3160211AS ST3120811AS ST3120211AS ST380811AS ST380211AS ST340211AS 100417177 Rev. C August 2007 - Seagate ST3000DM001 | Barracuda 7200.9 SATA Product Manual - Page 2
Seagate, Seagate Technology and the Wave logo are registered trademarks of Seagate Technology LLC in the United States and/or other countries. Barracuda drive capacity. Accessible capacity may vary depending on operating environment and formatting format, features and application software. Seagate - Seagate ST3000DM001 | Barracuda 7200.9 SATA Product Manual - Page 3
compatibility 27 4.2 Serial ATA device plug connector pin definitions 28 4.3 Supported ATA commands 29 4.3.1 Identify Device command 31 4.3.2 Set Features command 34 4.3.3 S.M.A.R.T. commands 35 5.0 Seagate Technology support services 37 Barracuda 7200.9 Serial ATA Product Manual, Rev. C i - Seagate ST3000DM001 | Barracuda 7200.9 SATA Product Manual - Page 4
ii Barracuda 7200.9 Serial ATA Product Manual, Rev. C - Seagate ST3000DM001 | Barracuda 7200.9 SATA Product Manual - Page 5
4. Figure 5. Typical 5V startup and operation current profile 14 Typical 12V startup and operation current profile 14 Serial ATA connectors and jumper options 24 Attaching SATA cabling 24 Mounting dimensions-top, side and end view 25 Barracuda 7200.9 Serial ATA Product Manual, Rev. C iii - Seagate ST3000DM001 | Barracuda 7200.9 SATA Product Manual - Page 6
- Seagate ST3000DM001 | Barracuda 7200.9 SATA Product Manual - Page 7
for the following Seagate Barracuda® 7200.9 Serial ATA model drives: ST3160811AS ST3160211AS ST3120811AS ST3120211AS ST380811AS ST380211AS ST340211AS These drives provide the following key features: • 7,200 RPM spindle speed. • High instantaneous (burst) data-transfer rates (up to 300 - Seagate ST3000DM001 | Barracuda 7200.9 SATA Product Manual - Page 8
to higher performance levels. In addition, Serial ATA makes the transition from parallel ATA easy by providing legacy software support. Serial Speed Serialized AT Attachment" specification. The specification can be downloaded from www.serialata.org. 2 Barracuda 7200.9 Serial ATA Product Manual, - Seagate ST3000DM001 | Barracuda 7200.9 SATA Product Manual - Page 9
For convenience, the phrases the drive and this drive are used throughout this manual to indicate the following drive models: ST3160811AS ST3160211AS ST3120811AS ST3120211AS measurement or definition, see the appropriate section of this manual. Barracuda 7200.9 Serial ATA Product Manual, Rev. C 3 - Seagate ST3000DM001 | Barracuda 7200.9 SATA Product Manual - Page 10
) I/O data-transfer rate (Mbytes/sec max) ATA data-transfer modes supported Cache buffer Height (mm max) Width (mm max) Length (mm max) Weight (max) Average latency (msec) Power-on to ready (sec max) Standby to ready (sec max) Track-to-track seek time (msec typical) Average seek time (msec typical - Seagate ST3000DM001 | Barracuda 7200.9 SATA Product Manual - Page 11
specification Vibration, nonoperating Drive acoustics, sound power (bels) Idle** Seek Nonrecoverable read errors Annualized Failure Rate (AFR) Warranty Contact start-stop cycles (25°C, 50% rel. humidity) Supports Hotplug operation per SATA II specification ST3160811AS ST3160211AS 5-22 Hz: 0.25 - Seagate ST3000DM001 | Barracuda 7200.9 SATA Product Manual - Page 12
) I/O data-transfer rate (Mbytes/sec max) ATA data-transfer modes supported Cache buffer Height (mm max) Width (mm max) Length (mm max) Weight (max) Average latency (msec) Power-on to ready (sec max) Standby to ready (sec max) Track-to-track seek time (msec typical) Average seek time (msec typical - Seagate ST3000DM001 | Barracuda 7200.9 SATA Product Manual - Page 13
specification Vibration, nonoperating Drive acoustics, sound power (bels) Idle** Seek Nonrecoverable read errors Annualized Failure Rate (AFR) Warranty Contact start-stop cycles (25°C, 50% rel. humidity) Supports Hotplug operation per SATA II specification ST3120811AS ST3120211AS 5-22 Hz: 0.25 - Seagate ST3000DM001 | Barracuda 7200.9 SATA Product Manual - Page 14
rate OD (Mbytes/sec max) I/O data-transfer rate (Mbytes/sec max) ATA data-transfer modes supported Cache buffer Height (max) Width (max) Length (max) Weight (max) Average latency (msec) Power-on to ready (sec max) Standby to ready (sec max) Track-to-track seek time (msec typical) Average seek time - Seagate ST3000DM001 | Barracuda 7200.9 SATA Product Manual - Page 15
specification Vibration, nonoperating Drive acoustics, sound power (bels) Idle** Seek Nonrecoverable read errors Annualized Failure Rate (AFR) Warranty Contact start-stop cycles (25°C, 50% rel. humidity) Supports Hotplug operation per SATA II specification ST380811AS ST380211AS 5-22 Hz: 0.25 - Seagate ST3000DM001 | Barracuda 7200.9 SATA Product Manual - Page 16
for additional information about 48bit addressing support of drives with capacities over 137 Gbytes. 2.3 drives in LBA mode, all blocks (sectors) are consecutively numbered from 0 to n-1, where n is the number of guaranteed sectors as defined above. 10 Barracuda 7200.9 Serial ATA Product Manual - Seagate ST3000DM001 | Barracuda 7200.9 SATA Product Manual - Page 17
Spindle speed (RPM) (± 0.2%) Average latency (msec) Internal data-transfer rate (Mbits/sec max) Sustained data transfer rate OD (Mbytes/sec max) I/O data-transfer rate ( +/- 0.010 146.99 5.787 380 grams (0.838 pounds) 365 grams (0.805 pounds) Barracuda 7200.9 Serial ATA Product Manual, Rev. C 11 - Seagate ST3000DM001 | Barracuda 7200.9 SATA Product Manual - Page 18
drives are formatted, benchmark tests that include command overhead or measure logical seeks may produce results that vary from these specifications. 2.7 Start/stop times Power-on to Ready (sec) Standby to Ready (sec) Ready to spindle stop (sec) - Seagate ST3000DM001 | Barracuda 7200.9 SATA Product Manual - Page 19
64 0.59 0.24 0.24 Avg 12V typ amps 2.8 (peak) 0.24 0.24 0.33 0.39 0.01 0.01 *During periods of drive idle, some offline activity may occur according to the S.M.A.R.T. specification, which may increase acoustic and power to operational levels. Barracuda 7200.9 Serial ATA Product Manual, Rev. C 13 - Seagate ST3000DM001 | Barracuda 7200.9 SATA Product Manual - Page 20
or an equivalent 15-ohm resistive load on the +5 volt line. • Using 12-volt power, the drive is expected to operate with a maximum of 120 mV peak-to-peak square-wave injected noise at up Voltage tolerance (including noise): 5V ± 5% 12V ± 10% 14 Barracuda 7200.9 Serial ATA Product Manual, Rev. C - Seagate ST3000DM001 | Barracuda 7200.9 SATA Product Manual - Page 21
times to zero. If the standby timer reaches zero before any drive activity is required, the drive makes a transition to Standby mode. In both Idle and Standby mode, the drive accepts all commands and returns to Active mode when disc access is necessary. Barracuda 7200.9 Serial ATA Product Manual - Seagate ST3000DM001 | Barracuda 7200.9 SATA Product Manual - Page 22
shock level that the drive can experience without incurring physical damage or degradation in performance when subsequently put into operation is 350 Gs (except 500GB is 300 Gs) based on a nonrepetitive half-sine shock pulse of 2 msec duration. 16 Barracuda 7200.9 Serial ATA Product Manual, Rev. C - Seagate ST3000DM001 | Barracuda 7200.9 SATA Product Manual - Page 23
drive may experience while meeting the performance Seek 2.9 bels (typ) 3.1 bels (max) *During periods of drive idle, some offline activity may occur according to the S.M.A.R.T. specification, which may increase acoustic and power to operational levels. Barracuda 7200.9 Serial ATA Product Manual - Seagate ST3000DM001 | Barracuda 7200.9 SATA Product Manual - Page 24
www.seagate.com/support/service/ From this page, click on the "Verify Your Warranty" link. You will be asked to provide the drive serial number, model number (or part number) and country of purchase. The system will display the warranty information for your drive. None required. 18 Barracuda 7200 - Seagate ST3000DM001 | Barracuda 7200.9 SATA Product Manual - Page 25
the previous paragraph. Drives are tested in representative end-user systems. Although CE-marked Seagate drives comply with the directives B products. Drives are tested in a representative, end-user system by a Korean-recognized lab. • (ACA). Barracuda 7200.9 Serial ATA Product Manual, Rev. C 19 - Seagate ST3000DM001 | Barracuda 7200.9 SATA Product Manual - Page 26
the manufacturer's instructions, may cause Television Interference Problems. This best of our knowledge the disc drives documented in this publication will comply with the final RoHS Directive requirements. A number of parts and materials in Seagate Barracuda 7200.9 Serial ATA Product Manual, Rev. C - Seagate ST3000DM001 | Barracuda 7200.9 SATA Product Manual - Page 27
, such as vulcanized rubber, that can outgas corrosive compounds should be minimized or eliminated. The useful life of any electronic equipment may be extended by replacing materials near circuitry with sulfide-free alternatives. Barracuda 7200.9 Serial ATA Product Manual, Rev. C 21 - Seagate ST3000DM001 | Barracuda 7200.9 SATA Product Manual - Page 28
22 Barracuda 7200.9 Serial ATA Product Manual, Rev. C - Seagate ST3000DM001 | Barracuda 7200.9 SATA Product Manual - Page 29
circuit board. • Do not remove the factory-installed labels from the drive or cover them with additional labels. Removal voids the warranty. Some factory-installed labels contain information needed to service the drive. Other labels are used to seal out dirt and contamination. Barracuda 7200 - Seagate ST3000DM001 | Barracuda 7200.9 SATA Product Manual - Page 30
that supports autonegotiation, set the drive jumper block to "3 Gbits per second operation" (see Figure 3 below), and connect the drive to that adapter. This option has the benefit of not limiting the drive to a 1.5 Gbits/sec transfer rate. 3.0 Gbits per second operation Limit data transfer rate to - Seagate ST3000DM001 | Barracuda 7200.9 SATA Product Manual - Page 31
in the bottom-mounting holes. See Figure 5 for drive mounting dimensions. Follow these important mounting precautions when mounting the drive: • Allow a minimum clearance of 0.030 inches (0. . Figure 5. Mounting dimensions-top, side and end view Barracuda 7200.9 Serial ATA Product Manual, Rev. C 25 - Seagate ST3000DM001 | Barracuda 7200.9 SATA Product Manual - Page 32
26 Barracuda 7200.9 Serial ATA Product Manual, Rev. C - Seagate ST3000DM001 | Barracuda 7200.9 SATA Product Manual - Page 33
transfers. It supports ATA programmed input/output (PIO) modes 0-4; multiword DMA modes 0-2, and Ultra DMA modes 0-6. For detailed information about the Serial ATA interface, refer to the "Serial ATA: High Speed Serialized AT Attachment" specification. 4.1 Hot-Plug compatibility Barracuda 7200 - Seagate ST3000DM001 | Barracuda 7200.9 SATA Product Manual - Page 34
pre-charge, 2nd mate 5V power 5V power 2nd mate P11 Ground or LED signal If grounded, drive does not use deferred spin P12 Ground 1st mate. P13 V12 P14 V12 P15 V12 12V power, configuration. 4. All used voltage pins (Vx) must be terminated. 28 Barracuda 7200.9 Serial ATA Product Manual, Rev. C - Seagate ST3000DM001 | Barracuda 7200.9 SATA Product Manual - Page 35
lists Serial ATA standard commands that the drive supports. For a detailed description of the ATA commands, refer to the Serial ATA: High Speed Serialized AT Attachment specification. See "S.M.A.R.T. commands 20H 24H 21H 40H 42H 41H 10H F6H F3H Barracuda 7200.9 Serial ATA Product Manual, Rev. C 29 - Seagate ST3000DM001 | Barracuda 7200.9 SATA Product Manual - Page 36
B0H / DAH B0H / D3H B0H / D6H 96H or E2H 94H or E0H E8H CAH 35H CDH CBH 3FH C5H 39H CEH 30H 31H 34H 30 Barracuda 7200.9 Serial ATA Product Manual, Rev. C - Seagate ST3000DM001 | Barracuda 7200.9 SATA Product Manual - Page 37
in sectors Number of sectors transferred during a Read Multiple or Write Multiple command Value 0C5AH 16,383 0000H 16 0000H 0000H 003FH 0000H ASCII 0000H 0400H 0000H x.xx 8010H 0000H 2F00H 0000H 0200H 0200H 0007H xxxxH xxxxH xxxxH xxxxH xxxxH Barracuda 7200.9 Serial ATA Product Manual, Rev. C 31 - Seagate ST3000DM001 | Barracuda 7200.9 SATA Product Manual - Page 38
version number Minor version number Command sets supported Command sets supported Command sets support extension Command sets enabled Command sets enabled Command sets enable extension Ultra DMA support and current mode (see note following this table) Security erase time Enhanced security erase time - Seagate ST3000DM001 | Barracuda 7200.9 SATA Product Manual - Page 39
the Identify Drive data. Description (if bit is set to 1) Bit Word 63 0 Multiword DMA mode 0 is supported. 1 Multiword DMA mode 1 is supported. 2 Multiword DMA mode 2 is supported. 8 14 Ultra DMA mode 6 is currently active. Barracuda 7200.9 Serial ATA Product Manual, Rev. C 33 - Seagate ST3000DM001 | Barracuda 7200.9 SATA Product Manual - Page 40
of SATA features AAH Enable read look-ahead (read cache) feature (default). F1H Report full capacity available Note. At power-on, or after a hardware or software reset, the default values of the features are as indicated above. 34 Barracuda 7200.9 Serial ATA Product Manual, Rev. C - Seagate ST3000DM001 | Barracuda 7200.9 SATA Product Manual - Page 41
drive returns. The diagnostic software ships with all new drives and is also available at: http://seatools.seagate.com. This drive is shipped with S.M.A.R.T. features disabled. You must have a recent BIOS or software package that supports . Barracuda 7200.9 Serial ATA Product Manual, Rev. C 35 - Seagate ST3000DM001 | Barracuda 7200.9 SATA Product Manual - Page 42
36 Barracuda 7200.9 Serial ATA Product Manual, Rev. C - Seagate ST3000DM001 | Barracuda 7200.9 SATA Product Manual - Page 43
™ (+1-405-324-3655) is a telecommunications device for the deaf (TDD). You can send questions or comments 24 hours daily and exchange messages with a technical support specialist during normal business hours for the call center in your region. Barracuda 7200.9 Serial ATA Product Manual, Rev. C 37 - Seagate ST3000DM001 | Barracuda 7200.9 SATA Product Manual - Page 44
issues. Resellers or end users of drive products should contact their place of purchase or Seagate warranty service for assistance. Have your serial number and model or part number available. Data Recovery Services Seagate offers data recovery services for all formats and all brands of storage media - Seagate ST3000DM001 | Barracuda 7200.9 SATA Product Manual - Page 45
1 Federal Communications Commission 20 Flush Cache 29 Flush Cache Extended 29 Format Track 29 Formatted capacity 10 G geometry 10 Gs 17 guaranteed sectors 10 H Handling precautions 23 heads 10 height 11 humidity 16 I I/O data-transfer rate 11 Barracuda 7200.9 Serial ATA Product Manual, Rev. C 39 - Seagate ST3000DM001 | Barracuda 7200.9 SATA Product Manual - Page 46
data-transfer rate OD 11 is 12 ISO document 7779 17 ITE 19 P Physical characteristics 11 point-to-point 2, 24 Power consumption 13 power consumption 13 power dissipation 13 Power modes 15 Power specifications 13 Power-management modes 15 Power-on to Ready 12 precautions 23 printed circuit board 23 - Seagate ST3000DM001 | Barracuda 7200.9 SATA Product Manual - Page 47
seeks 12 Sleep 13, 15, 30 Sleep mode 15 sound 17 Specification summary table 3 spindle speed 11 Spinup 13 Spinup power 13 Standby 13, 15, 30 Standby Immediate 30 Standby mode 13, 15 standby timer 15 Standby to Ready 12 Start/stop times 12 start-stop cycles 18 static-discharge 23 support services - Seagate ST3000DM001 | Barracuda 7200.9 SATA Product Manual - Page 48
42 Barracuda 7200.9 Serial ATA Product Manual, Rev. C - Seagate ST3000DM001 | Barracuda 7200.9 SATA Product Manual - Page 49
- Seagate ST3000DM001 | Barracuda 7200.9 SATA Product Manual - Page 50
Seagate Technology LLC 920 Disc Drive, Scotts Valley, California 95066-4544, USA Publication Number: 100417177, Rev. C, Printed in USA
Product Manual
Barracuda
®
7200.9 Serial ATA
100417177
Rev. C
August 2007
ST3160811AS
ST3160211AS
ST3120811AS
ST3120211AS
ST380811AS
ST380211AS
ST340211AS