Seagate ST3000VX000 SV35 Series SATA Product Manual

Seagate ST3000VX000 Manual

Get Seagate ST3000VX000 PDF manuals and user guides View all Seagate ST3000VX000 manuals
Add to My Manuals
Save this manual to your list of manuals

Seagate ST3000VX000 manual content summary:

  • Seagate ST3000VX000 | SV35 Series SATA Product Manual - Page 1
    Product Manual SV35 Series SATA ST3500641SV ST3250824SV ST3160812SV 100415208 Rev. B August 2007
  • Seagate ST3000VX000 | SV35 Series SATA Product Manual - Page 2
    are the property of their respective owners. One gigabyte, or GB, equals one billion bytes when referring to hard drive capacity. Accessible capacity may vary depending on operating environment and formatting. Seagate reserves the right to change, without notice, product offerings or specifications.
  • Seagate ST3000VX000 | SV35 Series SATA Product Manual - Page 3
    management modes 15 2.9 Environmental specifications drive Supported ATA commands 30 4.3.1 Identify Device command 33 4.3.2 Set Features command 37 4.3.3 S.M.A.R.T. commands 38 4.3.4 Streaming feature set support 39 5.0 Seagate Technology support services 49 SV35 Series SATA Product Manual
  • Seagate ST3000VX000 | SV35 Series SATA Product Manual - Page 4
    ii SV35 Series SATA Product Manual, Rev. B
  • Seagate ST3000VX000 | SV35 Series SATA Product Manual - Page 5
    14 Breather filter hole location 24 Serial ATA jumper block and connectors 25 Attaching SATA cabling 25 Mounting dimensions-top, side and end view 26 SV35 Series SATA Product Manual, Rev. B iii
  • Seagate ST3000VX000 | SV35 Series SATA Product Manual - Page 6
  • Seagate ST3000VX000 | SV35 Series SATA Product Manual - Page 7
    1.0 Introduction This manual describes the functional, mechanical and interface specifications for the following Seagate SV35 Series SATA model drives: • ST3500641SV • ST3250824SV • ST3160812SV These drives provide the following key features: • Specifically designed for surveilance DVRs. • Optimized
  • Seagate ST3000VX000 | SV35 Series SATA Product Manual - Page 8
    providing legacy software support. Serial ATA was designed to allow you to install a Serial ATA host adapter and Serial ATA disc drive in your current Serialized AT Attachment" specification. The specification can be downloaded from www.serialata.org. 2 SV35 Series SATA Product Manual, Rev. B
  • Seagate ST3000VX000 | SV35 Series SATA Product Manual - Page 9
    this manual to indicate the following models: ST3500641SV ST3250824SV ST3160812SV 2.1 Specification summaries The specifications listed in tables 1 and 2 are for quick reference. For details on specification measurement or definition, see the appropriate section of this manual. SV35 Series SATA
  • Seagate ST3000VX000 | SV35 Series SATA Product Manual - Page 10
    Drive specifications for 500 Gbyte models Drive specification data transfer rate (Mbytes/sec max) ATA data-transfer modes supported SATA data-transfer modes supported Cache buffer Height (max) Width (max) Length (max) m to 3,048 m (-200 ft to 10,000+ ft) 4 SV35 Series SATA Product Manual, Rev. B
  • Seagate ST3000VX000 | SV35 Series SATA Product Manual - Page 11
    5 years on distribution units. To determine the warranty for a specific drive, use a web browser to access the following web page: www.seagate.com/support/service/ From this page, click on the "Verify Your Warranty" link. You will be asked to provide the drive serial number, model number (or part
  • Seagate ST3000VX000 | SV35 Series SATA Product Manual - Page 12
    Drive specifications for 250 Gbyte models Drive specification data transfer rate (Mbytes/sec max) ATA data-transfer modes supported SATA data-transfer modes supported Cache buffer Height (max) Width (max) Length (max) m to 3,048 m (-200 ft to 10,000+ ft) 6 SV35 Series SATA Product Manual, Rev. B
  • Seagate ST3000VX000 | SV35 Series SATA Product Manual - Page 13
    5 years on distribution units. To determine the warranty for a specific drive, use a web browser to access the following web page: www.seagate.com/support/service/ From this page, click on the "Verify Your Warranty" link. You will be asked to provide the drive serial number, model number (or part
  • Seagate ST3000VX000 | SV35 Series SATA Product Manual - Page 14
    Drive specifications for 160 Gbyte models Drive specification data transfer rate (Mbytes/sec max) ATA data-transfer modes supported SATA data-transfer modes supported Cache buffer Height (max) Width (max) Length (max) m to 3,048 m (-200 ft to 10,000+ ft) 8 SV35 Series SATA Product Manual, Rev. B
  • Seagate ST3000VX000 | SV35 Series SATA Product Manual - Page 15
    5 years on distribution units. To determine the warranty for a specific drive, use a web browser to access the following web page: www.seagate.com/support/service/ From this page, click on the "Verify Your Warranty" link. You will be asked to provide the drive serial number, model number (or part
  • Seagate ST3000VX000 | SV35 Series SATA Product Manual - Page 16
    referring to hard drive capacity. Accessible information about 48bit addressing support of drives with capacities over 137 drives in LBA mode, all blocks (sectors) are consecutively numbered from 0 to n-1, where n is the number of guaranteed sectors as defined above. 10 SV35 Series SATA Product Manual
  • Seagate ST3000VX000 | SV35 Series SATA Product Manual - Page 17
    16/17 EPRML 790.1 840.0 124.5 141.5 97.69 119.0 7,200 815.2 867.2 65.0 76.6 83.0 300 16 Mbytes (16,385 kbytes) 8 Mbytes (8,192 kbytes) SV35 Series SATA Product Manual, Rev. B 11
  • Seagate ST3000VX000 | SV35 Series SATA Product Manual - Page 18
    and average), are expected to meet or exceed the noted values. However, due to the manner in which these drives are formatted, benchmark tests that include command overhead or measure logical seeks may produce results that vary from these specifications. 12 SV35 Series SATA Product Manual, Rev. B
  • Seagate ST3000VX000 | SV35 Series SATA Product Manual - Page 19
    the drive up to speed, with servo electronics active and with the heads in a random track location. • Standby mode During Standby mode, the drive accepts commands, but the drive is not spinning, and the servo and read/ write electronics are in power-down mode. SV35 Series SATA Product Manual, Rev
  • Seagate ST3000VX000 | SV35 Series SATA Product Manual - Page 20
    typ amps 2.0 (peak) 0.519 0.50 0.795 0.023 0.023 Figure 1 Typical 5V startup and operation current profile Figure 2 Typical 12V startup and operation current profile 14 SV35 Series SATA Product Manual, Rev. B
  • Seagate ST3000VX000 | SV35 Series SATA Product Manual - Page 21
    is at rest. The drive leaves Sleep mode after it receives a Hard Reset or Soft Reset from the host. After receiving a reset, the drive exits Sleep mode and enters Standby mode with all current translation parameters intact. • Idle and Standby timers SV35 Series SATA Product Manual, Rev. B 15
  • Seagate ST3000VX000 | SV35 Series SATA Product Manual - Page 22
    Idle and Standby mode, the drive accepts all commands and returns to Active mode when disc access is necessary. 2.9 Environmental specifications 2.9.1 Ambient temperature Ambient temperature 10,000+ ft.) -60.96 m to 12,192 m (-200 ft. to 40,000+ ft.) 16 SV35 Series SATA Product Manual, Rev. B
  • Seagate ST3000VX000 | SV35 Series SATA Product Manual - Page 23
    table lists the maximum nonoperating vibration that the drive may experience without incurring physical damage or degradation in performance when subsequently put into operation. 5-22 Hz 22-350 Hz 350-500 Hz 0.25 G (Limited displacement) 5.0 Gs 1.0 Gs SV35 Series SATA Product Manual, Rev. B 17
  • Seagate ST3000VX000 | SV35 Series SATA Product Manual - Page 24
    equation: (Number of seeks per second = 0.4 / (average latency + average access time) Drive acoustics, sound power Idle Operational, DVR (Digital Video Recorder) seeks 2.46 bels (typ) 2. 40%, 0.10 seconds C 70%, 0.01 seconds B EN 61000-4-11: 94 18 SV35 Series SATA Product Manual, Rev. B
  • Seagate ST3000VX000 | SV35 Series SATA Product Manual - Page 25
    as tested by TUV North America. 2.13.2 Electromagnetic compatibility Hard drives that display the CE mark comply with the European Union (EU or applicant: Seagate Technology • Manufacturing date: March 2006 • Manufacturer/nationality: Singapore and China SV35 Series SATA Product Manual, Rev. B
  • Seagate ST3000VX000 | SV35 Series SATA Product Manual - Page 26
    As such, each drive is considered to is required. Seagate Technology LLC 's instructions, Problems. This booklet is available from the Superintendent of Documents, U.S. Government Printing Office, Washington, DC 20402. Refer to publication number 004-000-00345-4. 20 SV35 Series SATA Product Manual
  • Seagate ST3000VX000 | SV35 Series SATA Product Manual - Page 27
    standard operating procedures are complied with. 2.15 Corrosive environment Seagate electronic drive components pass accelerated corrosion testing equivalent to 10 years exposure by replacing materials near circuitry with sulfide-free alternatives. SV35 Series SATA Product Manual, Rev. B 21
  • Seagate ST3000VX000 | SV35 Series SATA Product Manual - Page 28
    22 SV35 Series SATA Product Manual, Rev. B
  • Seagate ST3000VX000 | SV35 Series SATA Product Manual - Page 29
    remove the factory-installed labels from the drive or cover them with additional labels. Removal voids the warranty. Some factory-installed labels contain information needed to service the drive. Other labels are used to seal out dirt and contamination. SV35 Series SATA Product Manual, Rev. B 23
  • Seagate ST3000VX000 | SV35 Series SATA Product Manual - Page 30
    escape • To allow air pressure inside the hard disc to equalize with ambient pressure Note. If this hole is covered, sealed, or penetrated by any object, drive reliability may be compromised and could lead to permanent damage--doing so voids the warranty. 24 SV35 Series SATA Product Manual, Rev. B
  • Seagate ST3000VX000 | SV35 Series SATA Product Manual - Page 31
    you can connect the drive as illustrated in Figure 5. Signal connector Power connector Signal cable Power cable Figure 5 Attaching SATA cabling Each cable is keyed to ensure correct orientation. SV35 Series SATA drives support latching SATA connectors. SV35 Series SATA Product Manual, Rev. B 25
  • Seagate ST3000VX000 | SV35 Series SATA Product Manual - Page 32
    are shown in inches (mm). [1] Dimensions per SFF-8301 specification 2 x 1.625 (2 x 41.28) [1] 2 (2 x x 1.750 44.45) [1] Figure 6 4.000 (101.6) [1] Recommended case temperature measurement location Mounting dimensions-top, side and end view 26 SV35 Series SATA Product Manual, Rev. B
  • Seagate ST3000VX000 | SV35 Series SATA Product Manual - Page 33
    Hot-Plug compatibility SV35 Series SATA drives incorporate connectors which enable you to hot plug these drives in accordance with the Serial ATA II: Extension to Serial ATA 1.0a specification. This specification can be downloaded from www.serialata.org. SV35 Series SATA Product Manual, Rev. B 27
  • Seagate ST3000VX000 | SV35 Series SATA Product Manual - Page 34
    pre-charge, 2nd mate 5V power 5V power 2nd mate P11 Ground or LED signal If grounded, drive does not use deferred spin P12 Ground 1st mate. P13 V12 P14 V12 P15 V12 12V power, sequence apply to the case of backplane blindmate connector only. In this 28 SV35 Series SATA Product Manual, Rev. B
  • Seagate ST3000VX000 | SV35 Series SATA Product Manual - Page 35
    . One pin from each voltage is used for pre-charge when installed in a blind-mate backplane configuration. 4. All used voltage pins (Vx) must be terminated. SV35 Series SATA Product Manual, Rev. B 29
  • Seagate ST3000VX000 | SV35 Series SATA Product Manual - Page 36
    Serial ATA standard commands that the drive supports. For a detailed description of the ATA commands, refer to the Serial ATA: High Speed Serialized AT Attachment specification. See "S.M.A.R.T. commands" on page E1H 91H E4H C8H 25H C9H 2FH C4H 29H F8H 27H 30 SV35 Series SATA Product Manual, Rev. B
  • Seagate ST3000VX000 | SV35 Series SATA Product Manual - Page 37
    Operations B0H / D9H S.M.A.R.T. Enable/Disable Autosave B0H / D2H S.M.A.R.T. Enable Operations B0H / D8H S.M.A.R.T. Execute Offline B0H / D4H S.M.A.R.T. Read Attribute Thresholds B0H / D1H S.M.A.R.T. Read Data B0H / D0H SV35 Series SATA Product Manual, Rev. B 31
  • Seagate ST3000VX000 | SV35 Series SATA Product Manual - Page 38
    B0H / DAH B0H / D3H B0H / D6H 96H or E2H 94H or E0H E8H CAH 35H CDH CBH 3FH C5H 39H CEH 30H 31H 34H 32 SV35 Series SATA Product Manual, Rev. B
  • Seagate ST3000VX000 | SV35 Series SATA Product Manual - Page 39
    sectors per interrupt on Read multiple and Write 8010H multiple (16) 48 Reserved 49 Standard Standby timer, IORDY supported and may be disabled 50 ATA-reserved 51 PIO data-transfer cycle timing mode 52 Retired 0000H 2F00H 0000H 0200H 0200H SV35 Series SATA Product Manual, Rev. B 33
  • Seagate ST3000VX000 | SV35 Series SATA Product Manual - Page 40
    field is: 0FFFFFFFh (268,435,455 sectors, 137 Gbytes). Drives with capacities over 137 Gbytes will have 0FFFFFFFh in this supported xxxxH Serial ATA features enabled xxxxH Major version number 003EH Minor version number 0000H Command sets supported 364BH 34 SV35 Series SATA Product Manual
  • Seagate ST3000VX000 | SV35 Series SATA Product Manual - Page 41
    Description (if bit is set to 1) Bit Word 63 0 Multiword DMA mode 0 is supported. 1 Multiword DMA mode 1 is supported. 2 Multiword DMA mode 2 is supported. 8 Multiword DMA mode 0 is currently active. 9 Multiword DMA mode 1 is currently active. SV35 Series SATA Product Manual, Rev. B 35
  • Seagate ST3000VX000 | SV35 Series SATA Product Manual - Page 42
    supported. 1 Ultra DMA mode 1 is supported. 2 Ultra DMA mode 2 is supported. 3 Ultra DMA mode 3 is supported. 4 Ultra DMA mode 4 is supported. 5 Ultra DMA mode 5 is supported. 6 Ultra DMA mode 6 is supported DMA mode 6 is currently active. 36 SV35 Series SATA Product Manual, Rev. B
  • Seagate ST3000VX000 | SV35 Series SATA Product Manual - Page 43
    generates an interrupt. If the value in the register does not represent a feature that the drive supports, the command is aborted. Power-on default has the read look-ahead and write caching AAH Enable read look-ahead (read cache) feature (default). SV35 Series SATA Product Manual, Rev. B 37
  • Seagate ST3000VX000 | SV35 Series SATA Product Manual - Page 44
    new drives and is also available at: http://seatools.seagate.com. This drive is shipped with S.M.A.R.T. features disabled. You must have a recent BIOS or software package that supports S.M.A.R.T. aborted and 0x04 (abort) is written to the Error register. 38 SV35 Series SATA Product Manual, Rev. B
  • Seagate ST3000VX000 | SV35 Series SATA Product Manual - Page 45
    this, Seagate has not implemented them. 4.3.4.1 Identify Device command These drives will set word 84 bit 4 (Streaming Feature Set Supported) and vendor specific. "Stream ID" as noted in the ATA specification is not used by the Seagate implementation. SV35 Series SATA Product Manual, Rev. B
  • Seagate ST3000VX000 | SV35 Series SATA Product Manual - Page 46
    remain clear. Flush to Disk bit The Flush to Disk bit in the WRITE STREAM device in an error condition is vendor specific. Write Continuous bit If the Write bit specifies to the drive that this command starts management for content critical data. 40 SV35 Series SATA Product Manual, Rev. B
  • Seagate ST3000VX000 | SV35 Series SATA Product Manual - Page 47
    the Features register) * (IDENTIFY DEVICE words (99:98)) This time shall be used by the drive when an individual streaming command with a CCTL of 0 is issued. The time is measured from the :8) DEVICE REGISTER FIELD DESCRIPTIONS Dev The selected device. SV35 Series SATA Product Manual, Rev. B 41
  • Seagate ST3000VX000 | SV35 Series SATA Product Manual - Page 48
    transfer size. The implementation of the padding is vendor specific. If the drive is unable to transfer the correct amount of data by the CCTL, the drive will set the ERR bit to 1 and the BSY Features Register Previous) * (IDENTIFY DEVICE words (99:98)) 42 SV35 Series SATA Product Manual, Rev. B
  • Seagate ST3000VX000 | SV35 Series SATA Product Manual - Page 49
    vendor specific. the drive was supported. ABRT may be set to 1 if the device is not able to complete the action requested by the command. ABRT shall be set to 1 if an address outside of the range of user-accessible addresses is requested if IDNF is not set to 1. SV35 Series SATA Product Manual
  • Seagate ST3000VX000 | SV35 Series SATA Product Manual - Page 50
    contain errors. DRQ 0 This bit shall be set to 0. ERR 1 This bit shall be set to 1 if an Error register bit is set to 1. 44 SV35 Series SATA Product Manual, Rev. B
  • Seagate ST3000VX000 | SV35 Series SATA Product Manual - Page 51
    Time Limit expired by setting the CCTO bit in the error register. In all cases, the drive shall attempt to transfer the amount of data requested within the Command Completion Time Limit even if some Limit even if some data transferred is in error. SV35 Series SATA Product Manual, Rev. B 45
  • Seagate ST3000VX000 | SV35 Series SATA Product Manual - Page 52
    Stream command was defined for this Stream ID, the result is vendor specific. The time is measured from the write of the command register to shown below. If the WC bit is set to 1 and the drive was able to transfer the correct amount of data (even though some SV35 Series SATA Product Manual, Rev. B
  • Seagate ST3000VX000 | SV35 Series SATA Product Manual - Page 53
    command is not supported. ABRT may be drive moves its actuator to access some data other than what the host is (or shortly will be) accessing, there will be an unavoidable delay before the actuator can be moved to where the host needs it to be to service a command. SV35 Series SATA Product Manual
  • Seagate ST3000VX000 | SV35 Series SATA Product Manual - Page 54
    is allowed, the actuator could be busy servicing a cached write at virtually any time. If the host's time limit allows, the drive will perform internal defect management on any defective sectors encountered. If the drive runs out of time during a write . 48 SV35 Series SATA Product Manual, Rev. B
  • Seagate ST3000VX000 | SV35 Series SATA Product Manual - Page 55
    by email for your questions. Presales Support: [email protected] Technical Support: [email protected] Warranty Support: http://www.seagate.com/support/service/index.html mySeagate my.seagate.com is the industry's first Web portal designed specifically for OEMs and distributors. It provides
  • Seagate ST3000VX000 | SV35 Series SATA Product Manual - Page 56
    East and Africa, go to the "Contact Us" page on www.seagate.com. Asia/Pacific Support Services For an extensive list of telephone numbers to technical support, presales and warranty service in Asia/Pacific, go to the "Contact Us" page on www.seagate.com. 50 SV35 Series SATA Product Manual, Rev. B
  • Seagate ST3000VX000 | SV35 Series SATA Product Manual - Page 57
    ATA data-transfer modes supported 4, 6, 8 Configuring the drive 23 connectors specifications 16 EPRML 11 error-correction algorithms 1 errors 5, 7, 9, 19 ESD 23 EU 19 European Union (EU) requirements 19 European Union Restriction of Hazardous Substanc- es 21 SV35 Series SATA Product Manual
  • Seagate ST3000VX000 | SV35 Series SATA Product Manual - Page 58
    the drive 23 specifications 13 Power-management modes 15 Power-on to Ready 13 Power-on to ready 4, 6, 8 precautions 23 printed circuit board 23 programmable power management 15 Q quick reference 3 R Radiated RF immunity 18 Radio and television interference 20 radio frequency (RF) 18 52 SV35 Series
  • Seagate ST3000VX000 | SV35 Series SATA Product Manual - Page 59
    mode 4, 6, 8, 15 sound power 7, 9 Specification summary table 3 Spindle speed 4, 6, 8 support services 49 Surge immunity 18 T technical support services 49 temperature 4, 6, 8, 12, 16 Temperature gradient 4, 6, 8 temperature gradient 16 timer 15 timers 15 TMR 1 SV35 Series SATA Product Manual
  • Seagate ST3000VX000 | SV35 Series SATA Product Manual - Page 60
    Write Multiple 1, 32 Write Multiple Extended 32 Write Multiple FUA Extended 32 Write Sectors 32 Write Sectors Extended 32 Write Sectors Without Retries 32 54 SV35 Series SATA Product Manual, Rev. B
  • Seagate ST3000VX000 | SV35 Series SATA Product Manual - Page 61
  • Seagate ST3000VX000 | SV35 Series SATA Product Manual - Page 62
    Seagate Technology LLC 920 Disc Drive, Scotts Valley, California 95066-4544, USA Publication Number: 100415208, Rev. B, Printed in USA
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
Product Manual
SV35 Series SATA
100415208
Rev. B
August 2007
ST3500641SV
ST3250824SV
ST3160812SV