Seagate ST300MP0064 Savvio 15K.3 SAS Product Manual

Seagate ST300MP0064 Manual

Get Seagate ST300MP0064 PDF manuals and user guides View all Seagate ST300MP0064 manuals
Add to My Manuals
Save this manual to your list of manuals

Seagate ST300MP0064 manual content summary:

  • Seagate ST300MP0064 | Savvio 15K.3 SAS Product Manual - Page 1
    Product Manual Savvio® 15K.3 SAS Standard Models ST9300653SS ST9146853SS Self-Encrypting Drive Models ST9300553SS ST9146753SS SED FIPS140-2 Models ST9300453SS ST9146653SS 100629381 Rev. E April 2012
  • Seagate ST300MP0064 | Savvio 15K.3 SAS Product Manual - Page 2
    reproduced in any form without written permission of Seagate Technology LLC. Call 877-PUB-TEK1(877-782-8351) to request permission. When referring to drive capacity, one gigabyte, or GB, equals one billion bytes and one terabyte, or TB, equals one trillion bytes. Your computer's operating system may
  • Seagate ST300MP0064 | Savvio 15K.3 SAS Product Manual - Page 3
    Contents 1.0 Seagate Technology support services 1 2.0 Scope 2 3.0 Applicable standards and reference Preventive maintenance 16 6.2.3 Hot plugging the drive 16 6.2.4 S.M.A.R.T 17 6.2.5 Thermal monitor 18 6.2.6 Drive Self Test (DST 19 6.2.7 Product 27 Savvio 15K.3 SAS Product Manual, Rev. E i
  • Seagate ST300MP0064 | Savvio 15K.3 SAS Product Manual - Page 4
    Information (PI 44 10.8.1 Levels of PI 44 10.8.2 Setting and determining the current Type Level 44 10.8.3 Identifying a Protection Information drive 45 11.0 Installation 46 11.1 Drive orientation 46 11.2 Cooling 47 11.3 Drive mounting 48 11.4 Grounding 48 12.0 Interface requirements 49 12
  • Seagate ST300MP0064 | Savvio 15K.3 SAS Product Manual - Page 5
    .5 Signal characteristics 63 12.5.1 Ready LED Out 63 12.5.2 Differential signals 64 12.6 SAS-2 Specification compliance 64 12.7 Additional information 64 Savvio 15K.3 SAS Product Manual, Rev. E iii
  • Seagate ST300MP0064 | Savvio 15K.3 SAS Product Manual - Page 6
    iv Savvio 15K.3 SAS Product Manual, Rev. E
  • Seagate ST300MP0064 | Savvio 15K.3 SAS Product Manual - Page 7
    flow 47 Physical interface 59 SAS device plug dimensions 60 SAS device plug dimensions (detail 61 SAS transmitters and receivers 63 Savvio 15K.3 SAS Product Manual, Rev. E v
  • Seagate ST300MP0064 | Savvio 15K.3 SAS Product Manual - Page 8
  • Seagate ST300MP0064 | Savvio 15K.3 SAS Product Manual - Page 9
    /support/warranty_&_returns_assistance For information regarding Data Recovery Services, visit http://www.i365.com For Seagate OEM & Distribution partner portal, visit https://direct.seagate.com/portal/system For Seagate reseller portal, visit http://spp.seagate.com Savvio 15K.3 SAS Product Manual
  • Seagate ST300MP0064 | Savvio 15K.3 SAS Product Manual - Page 10
    your Field Applications Engineer (FAE) or our global support services group as shown in Section 1.0. Unless otherwise stated, the information in this manual applies to standard and Self-Encrypting Drive models. Model Number ST9300653SS ST9300553SS ST9300453SS ST9146853SS ST9146753SS ST9146653SS
  • Seagate ST300MP0064 | Savvio 15K.3 SAS Product Manual - Page 11
    systems to perform those tests required and design their system to ensure that equipment operating in the same system as the drive or external to the system does not adversely affect the performance of the drive. See Tables 2 and 3, DC power requirements. Savvio 15K.3 SAS Product Manual, Rev. E 3
  • Seagate ST300MP0064 | Savvio 15K.3 SAS Product Manual - Page 12
    (EMC) Framework requirements of Australia's Spectrum Management Agency (SMA). Korean KCC If these drives have the Korean Communications Commission (KCC) logo, they comply with KN22, KN 24, and Bureau of Standards, Metrology, and Inspection (BSMI). 4 Savvio 15K.3 SAS Product Manual, Rev. E
  • Seagate ST300MP0064 | Savvio 15K.3 SAS Product Manual - Page 13
    number of parts and materials in Seagate products are procured from external suppliers. We rely on the representations of our suppliers regarding for all parts and materials for the disk drives documented in this publication. Current supplier declarations include Product Manual, Rev. E 5
  • Seagate ST300MP0064 | Savvio 15K.3 SAS Product Manual - Page 14
    Seagate part number: 100293071 SCSI Commands Reference Manual Seagate part number: 100293068 Self-Encrypting Drives Reference Manual Seagate part number: 100515636 ANSI SAS Documents SFF-8323 3.5" Drive Form Factor with Serial Connector SFF-8460 HSS Backplane Design Guidelines SFF-8470
  • Seagate ST300MP0064 | Savvio 15K.3 SAS Product Manual - Page 15
    support the Serial Attached SCSI Protocol as described in the ANSI specifications, this document, and the SAS Interface Manual (part number 100293071) which describes the general interface characteristics of this drive. Savvio drives with either SAS or SATA hard disk drives. This allows you to
  • Seagate ST300MP0064 | Savvio 15K.3 SAS Product Manual - Page 16
    task set (queue) • Supports up applied to the drive • Zone bit Drive models have the following additional features: • Automatic data encryption/decryption • Controlled access • Random number generator • Drive locking • 16 independent data bands • Cryptographic erase of user data for a drive drive
  • Seagate ST300MP0064 | Savvio 15K.3 SAS Product Manual - Page 17
    latency = 2.0 ms • Background processing of queue • Supports start and stop commands (spindle stops spinning) • Adaptive is no significant performance difference between Self-Encrypting Drive and standard (nonSelf-Encrypting Drive) models. 4.4 Reliability • Annualized Failure Manual, Rev. E 9
  • Seagate ST300MP0064 | Savvio 15K.3 SAS Product Manual - Page 18
    table in the SAS Interface Manual, part number 100293071. A value of zero in the Number of Blocks field indicates that the drive will not change the the maximum number of LBAs in the Number of Blocks field changes the total drive capacity to the value in the Number of Blocks field. A value greater
  • Seagate ST300MP0064 | Savvio 15K.3 SAS Product Manual - Page 19
    "SAS physical interface" on page 59 and the SAS Interface Manual (part number 100293071) for additional timing details. 5.2.1 Access , voltage, and horizontal orientation as measured on a representative sample of drives. 4. Access time = controller overhead + average seek time and applies
  • Seagate ST300MP0064 | Savvio 15K.3 SAS Product Manual - Page 20
    to or from the host. ** MiB/s x 1.048 = MB/s 5.3 Start/stop time The drive accepts the commands listed in the SAS Interface Manual less than 3 seconds after DC power has been applied. If the drive receives a NOTIFY (ENABLE SPINUP) primitive through either port and has not received a START STOP
  • Seagate ST300MP0064 | Savvio 15K.3 SAS Product Manual - Page 21
    Mode Page 02h (disconnect/reconnect control) in the SAS Interface Manual. The following is a simplified description of the prefetch/cache operation 14 and 15) does not set up a new segment size. If the STRICT bit in Mode page 00h (byte 2, bit 1) is set to one, the drive responds as it does for any
  • Seagate ST300MP0064 | Savvio 15K.3 SAS Product Manual - Page 22
    set up for read functions. The buffer segmentation scheme is set drive does not overwrite data drive drive settings for the drive 0 enables prefetch. The drive does not use the Max drive enables prefetch of contiguous blocks from the disk when it senses that a prefetch hit will likely occur. The drive
  • Seagate ST300MP0064 | Savvio 15K.3 SAS Product Manual - Page 23
    the following: • The drive is operated in accordance with this manual using DC power as defined in paragraph 7.3, "DC power requirements." • Errors caused by host system failures are excluded from error rate computations. • Assume random data. • Default OEM error recovery settings are applied. This
  • Seagate ST300MP0064 | Savvio 15K.3 SAS Product Manual - Page 24
    as drive service You can enhance the reliability of Savvio disk drives by ensuring that the drive service life of the drive drive drive looses sync, the drive initiated link reset. The drive fails, the drive does not respond drive carrier prior to inserting it into the system. Caution. The drive
  • Seagate ST300MP0064 | Savvio 15K.3 SAS Product Manual - Page 25
    S.M.A.R.T. functions. When enabled, S.M.A.R.T. collects on-line data as the drive performs normal read and write operations. When the PERF bit is set, the drive is considered to be in "On-line Mode Only" and will is referred to as the Failure Counter. Savvio 15K.3 SAS Product Manual, Rev. E 17
  • Seagate ST300MP0064 | Savvio 15K.3 SAS Product Manual - Page 26
    parameter in the temperature log page (see Table 1) can be used to set this trip point. The default value for this drive is 68°C, however, you can set it to any value in the range of 0 to 68°C. If 0000h 0001h Primary Temperature Reference Temperature 18 Savvio 15K.3 SAS Product Manual, Rev. E
  • Seagate ST300MP0064 | Savvio 15K.3 SAS Product Manual - Page 27
    it reports a fault condition. If the drive fails the test, remove it from service and return it to Seagate for service. 6.2.6.1 DST failure definition The drive will present a "diagnostic failed" condition extended test) in bytes 1, bits 5, 6, and 7. Savvio 15K.3 SAS Product Manual, Rev. E 19
  • Seagate ST300MP0064 | Savvio 15K.3 SAS Product Manual - Page 28
    as follows: 1. The Function Code field is set to the same value as sent in the DST command 2. The Self-Test Results Value field is set to Fh 3. The drive will store the log page to non-volatile memory test routine was interrupted by a reset condition). 20 Savvio 15K.3 SAS Product Manual, Rev. E
  • Seagate ST300MP0064 | Savvio 15K.3 SAS Product Manual - Page 29
    Shipping a drive in a non-approved container voids the drive warranty. Seagate service centers are the only facilities authorized to service Seagate drives for the drive in a non-operational environment is 90 days. Drives should be drive operation cycles is 30 days. During any storage period the drive
  • Seagate ST300MP0064 | Savvio 15K.3 SAS Product Manual - Page 30
    drive. 7.1 PowerChoiceTM power management Drives using the CSS architecture have limited power management capability. The table below lists the supported Start Stop Unit command for drives using the CSS architecture: • to directly transition the drive to any supported PowerChoice mode. The REQUEST
  • Seagate ST300MP0064 | Savvio 15K.3 SAS Product Manual - Page 31
    Supported power drive controller ASIC is enabled and functional in the SED models. This represents a small additional drain on the 5V supply of about 30mA and a commensurate increase of about 150mW in power consumption. There is no additional drain on the 12V supply. Savvio 15K.3 SAS Product Manual
  • Seagate ST300MP0064 | Savvio 15K.3 SAS Product Manual - Page 32
    1.43 1.36 0.59 0.38 0.66 0.40 1.26 1.34 0.89 0.25 0.97 0.25 1.31 0.48 1.05 0.25 1.10 0.25 1.40 0.42 24 Savvio 15K.3 SAS Product Manual, Rev. E
  • Seagate ST300MP0064 | Savvio 15K.3 SAS Product Manual - Page 33
    supply at nominal voltage. N (number of drives tested) = 6, 35 Degrees C ambient. the drive signifies that its power-up sequence has been completed and that the drive is completes but before the drive has received the Notify reads. [7] During idle, the drive heads are relocated every 60 seconds
  • Seagate ST300MP0064 | Savvio 15K.3 SAS Product Manual - Page 34
    to multiple drives from a common supply, careful consideration for individual drive power given below are peak-to-peak measurements and apply at the drive power connector. +5V +12V = 250 mV pp from 100 The drive does not require power sequencing. The drive protects against inadvertent writing during power-up
  • Seagate ST300MP0064 | Savvio 15K.3 SAS Product Manual - Page 35
    7.3.3 Current profiles The +12V and +5V current profiles for the Savvio 15K.3 SAS drives are shown below. Figure 1. Current profile for 300GB models. Savvio 15K.3 SAS Product Manual, Rev. E 27
  • Seagate ST300MP0064 | Savvio 15K.3 SAS Product Manual - Page 36
    Figure 2. Current profile for 146GB models Note: All times and currents are typical. See Tables 2 and 3 for maximum current requirements. 28 Savvio 15K.3 SAS Product Manual, Rev. E
  • Seagate ST300MP0064 | Savvio 15K.3 SAS Product Manual - Page 37
    operations, refer to the following I/O rate curve (see Figure 3). Locate the typical I/O rate for a drive in your system on the horizontal axis and read the corresponding +5 volt current, +12 volt current, and power vs. input/output operations per second Savvio 15K.3 SAS Product Manual, Rev. E 29
  • Seagate ST300MP0064 | Savvio 15K.3 SAS Product Manual - Page 38
    operations, refer to the following I/O rate curve (see Figure 3). Locate the typical I/O rate for a drive in your system on the horizontal axis and read the corresponding +5 volt current, +12 volt current, and power vs. input/output operations per second 30 Savvio 15K.3 SAS Product Manual, Rev. E
  • Seagate ST300MP0064 | Savvio 15K.3 SAS Product Manual - Page 39
    7.5.2 Relative humidity The values below assume that no condensation on the drive occurs. a. Operating 5% to 95% non-condensing relative humidity with a maximum gradient of 20% per hour. b. Non-operating 5% to 95% non-condensing relative humidity. Savvio 15K.3 SAS Product Manual, Rev. E 31
  • Seagate ST300MP0064 | Savvio 15K.3 SAS Product Manual - Page 40
    to minimize freight costs and ease material handling. Seagate finished drive bulk packs may be shipped individually. For less than full shipments, instructions are printed on the bulk pack carton for minimum drive quantities and proper drive placement 32 Savvio 15K.3 SAS Product Manual, Rev. E
  • Seagate ST300MP0064 | Savvio 15K.3 SAS Product Manual - Page 41
    mounting Note. Image is for reference only, may not represent actual drive. 7.5.4.2 Vibration a. Operating-normal The drive as installed for normal operation, shall comply with the complete specified This assumes system recovery routines are available. Savvio 15K.3 SAS Product Manual, Rev. E 33
  • Seagate ST300MP0064 | Savvio 15K.3 SAS Product Manual - Page 42
    both isolated drives and integrated drives. The drive shall not incur Y, or Z axis. 7.5.5 Air cleanliness The drive is designed to operate in a typical office environment drive electronic drive component the masking noise on typical drives when measured according to Seagate specification 30553-
  • Seagate ST300MP0064 | Savvio 15K.3 SAS Product Manual - Page 43
    7.6 Mechanical specifications Refer to Figure 9 for detailed mounting configuration dimensions. See Section 11.3, "Drive mounting." Weight: 300GB models: 0.441 lb 146GB models: 0.426 lb 0.200 Kg 0.193 .org. in mm in mm in mm Figure 9. Dimensions Savvio 15K.3 SAS Product Manual, Rev. E 35
  • Seagate ST300MP0064 | Savvio 15K.3 SAS Product Manual - Page 44
    /conformance testing. Seagate Enterprise SED The SEDs referenced in this Product Manual have been validated by CMVP and have been thoroughly tested by a authorization of an operator to assume a specific role and perform a corresponding set of services. 36 Savvio 15K.3 SAS Product Manual, Rev. E
  • Seagate ST300MP0064 | Savvio 15K.3 SAS Product Manual - Page 45
    Figure 10. Example of FIPS tamper evidence labels/seals. Note. Image is for reference only, may not represent actual drive. Savvio 15K.3 SAS Product Manual, Rev. E 37
  • Seagate ST300MP0064 | Savvio 15K.3 SAS Product Manual - Page 46
    drive, by the drive, never leaves the drive, and external to the encryption engine. A unique data encryption key is used for each of the drive's possible16 data bands (see Section 9.5). 9.2 Controlled access The drive drive security services. drive owner can define up to 16 data bands on the drive
  • Seagate ST300MP0064 | Savvio 15K.3 SAS Product Manual - Page 47
    The drive has set to true in the locking table in order for the bands "LockOnReset" setting of "PowerCycle" to actually lock access to the band when a "PowerCycle" event occurs. This scenario occurs if the drive is removed from its cabinet. The drive drive drive- drive the drive drive drive
  • Seagate ST300MP0064 | Savvio 15K.3 SAS Product Manual - Page 48
    drive. Sanitize CRYPTOGRAPHIC ERASE is a SCSI CDB Op code 48h and selecting the service action code 3 (CRYPTOGRAPHIC ERASE) 9.11 RevertSP SED models will support on the drive label must be provided. PSID is not electronically accessible and can only be manually read from the drive label or
  • Seagate ST300MP0064 | Savvio 15K.3 SAS Product Manual - Page 49
    set in the Error Recovery Parameters mode page. Error recovery and defect management may involve using several SCSI commands described in the SAS Interface Manual. The drive implements selectable error recovery time limits required in video applications. The error recovery scheme supported
  • Seagate ST300MP0064 | Savvio 15K.3 SAS Product Manual - Page 50
    write recovery page has the RC bit = 0 and if the read retry count is set to 5, this means ~ 25% of error recovery will be executed which consumes 621 operations performed by the drive. Status returned by the drive to the initiator is described in the SAS Interface Manual. Status reporting plays a
  • Seagate ST300MP0064 | Savvio 15K.3 SAS Product Manual - Page 51
    service by the host system. On regular duty drives, if the host system makes use of the BMS Log Page, it can avoid placing data in suspect locations on the media. Unreadable and recovered error sites will be logged or reallocated per ARRE/AWRE settings Savvio 15K.3 SAS Product Manual, Rev. E 43
  • Seagate ST300MP0064 | Savvio 15K.3 SAS Product Manual - Page 52
    at the HBA and HBA driver level. Allowing a system that typically does not support 520 LBA formats to integrate support Type 3. 10.8.2 Setting and determining the current Type Level A drive is initialized to a type of PI by using the format command on a PI capable drive. Once a drive Manual, Rev. E
  • Seagate ST300MP0064 | Savvio 15K.3 SAS Product Manual - Page 53
    Descriptor (VPD) page 0x86 provides bits to indicate the PI Types supported and which PI fields the drive supports checking. Note. For further details with respect to PI, please refer to SCSI Block Commands - 3 (SBC-3) Draft Standard documentation. Savvio 15K.3 SAS Product Manual, Rev. E 45
  • Seagate ST300MP0064 | Savvio 15K.3 SAS Product Manual - Page 54
    jumpers, switches, or terminators on the drive. SAS drives are designed to be used in a host system that provides a SAS-compatible backplane with bays designed to accommodate the drive host system using the instructions provided by the host system. This connects the drive directly to your system's
  • Seagate ST300MP0064 | Savvio 15K.3 SAS Product Manual - Page 55
    the air inlet and exit should be chosen to minimize the travel length of air heated by the drive and other heat sources within the rack, cabinet, or drawer environment. If forced air is determined to not represent actual product, for reference only. Savvio 15K.3 SAS Product Manual, Rev. E 47
  • Seagate ST300MP0064 | Savvio 15K.3 SAS Product Manual - Page 56
    you mount the drive using the bottom holes, ensure that you do not physically distort the drive by attempting to in the drive and cannot be separated by the user. The equipment in which the drive is mounted is electrically isolating) method of mounting the drive in the host equipment. Increased
  • Seagate ST300MP0064 | Savvio 15K.3 SAS Product Manual - Page 57
    lists the SAS-specific features supported by Savvio drives. 12.1.1 Task management functions Table 5 lists the SAS task management functions supported. Table 5: SAS task management functions supported Task name Abort Task Clear ACA Clear task set Abort task set Logical Unit Reset Query Task
  • Seagate ST300MP0064 | Savvio 15K.3 SAS Product Manual - Page 58
    supported link rates are 1.5, 3.0, or 6.0 Gb/s. Subject to buffer availability, the Savvio drives support: • Concurrent port transfers-The drive supports Numbers page (C0h) Implemented Operating Def page (81h) Jumper Settings page (C2h) Supported Vital Product Data page (00h) Unit Serial Number page
  • Seagate ST300MP0064 | Savvio 15K.3 SAS Product Manual - Page 59
    0Ch) Protocol-Specific Port page (19h) Power Condition page (1Ah) Rigid Disk Drive Geometry page (04h) Unit Attention page (00h) Verify Error Recovery page ( Supported N Y Y Y N Y Y N N N Y Y Y N Y Y Y Y Y Y [2] Y Y [2] Y Y Y Y Y Y Y N Y Y Y Y Y N Y Y Y N Y Y Savvio 15K.3 SAS Product Manual, Rev.
  • Seagate ST300MP0064 | Savvio 15K.3 SAS Product Manual - Page 60
    Supported Diagnostics pages (00h) Translate page (40h) Set Limits Supported Y Y N Y N Y (non-SED drives only) Y Y Y Y Y (non-SED drives only) Y Y Y Y Y Y Y Y Y Y Y Y Y Y N Y Y N Y Y (SED drives only) N N N Y (SED drives only) Y (SED drives only) Y Y Y Y Y N Savvio 15K.3 SAS Product Manual
  • Seagate ST300MP0064 | Savvio 15K.3 SAS Product Manual - Page 61
    mode pages supported. [4] Y = Yes. Command is supported. N = No. Command is not supported. A = Support is available on special request. [5] Approximately 1.5 increase in time to complete this command for a SED drive versus a non-SED drive of the same capacity. Savvio 15K.3 SAS Product Manual, Rev
  • Seagate ST300MP0064 | Savvio 15K.3 SAS Product Manual - Page 62
    drive should return to the initiator per the format given in the SAS Interface Manual ** SCSI Revision support. See the appropriate drive to report its operating parameters to the initiator. The drive maintains four sets of mode parameters: 1. Default values Default values are hard-coded in the drive
  • Seagate ST300MP0064 | Savvio 15K.3 SAS Product Manual - Page 63
    are installed from saved or default values after a power on reset, hard reset, or Bus Device Reset message. 4. Changeable values Changeable values the drive in response to the Mode Sense command pages for SCSI implementation (see the SAS Interface Manual ). DEF = Default value. Standard OEM drives
  • Seagate ST300MP0064 | Savvio 15K.3 SAS Product Manual - Page 64
    Table 9: Mode Sense data default and changeable values for 300GB drives MODE DATA HEADER: 00 00 05 12 8B 01 30 02 MODE PAGES: DEF 81 0A C0 14 FF 00 00 00 05 00 FF FF FF DEF 80 06 00 80 0F 00 00 00 CHG 80 06 B7 C0 8F 00 00 00 56 Savvio 15K.3 SAS Product Manual, Rev. E
  • Seagate ST300MP0064 | Savvio 15K.3 SAS Product Manual - Page 65
    Table 10: Mode Sense data default and changeable values for 146GB drives MODE DATA HEADER: 00 00 05 12 8B 01 30 02 MODE PAGES: DEF 81 0A C0 14 FF 00 00 00 05 00 FF FF FF FF DEF 80 06 00 80 0F 00 00 00 CHG 80 06 B7 C0 8F 00 00 00 Savvio 15K.3 SAS Product Manual, Rev. E 57
  • Seagate ST300MP0064 | Savvio 15K.3 SAS Product Manual - Page 66
    12: Miscellaneous status Supported Y Status Good Y Check condition Y Condition met/good Y Busy Y Intermediate/good Y Intermediate/condition met/good Y Reservation conflict Y Task set full N ACA active N ACA active, faulted initiator 58 Savvio 15K.3 SAS Product Manual, Rev. E
  • Seagate ST300MP0064 | Savvio 15K.3 SAS Product Manual - Page 67
    the dimensions of the SAS connector. Details of the physical, electrical, and logical characteristics are provided within this section. The operational aspects of Seagate's SAS drives are provided in the SAS Interface Manual. Figure 13. Physical interface Savvio 15K.3 SAS Product
  • Seagate ST300MP0064 | Savvio 15K.3 SAS Product Manual - Page 68
    ) 5.08 B 0.84 0.05 (22X) 0.15 B 4.90 0.08 P15 P1 S1 S7 CL OF DATUM B Figure 14. SAS device plug dimensions 60 Savvio 15K.3 SAS Product Manual, Rev. E
  • Seagate ST300MP0064 | Savvio 15K.3 SAS Product Manual - Page 69
    A 0.03 1.23 0.05 65 30 0.08 0.05 Detail 2 1.90 0.08 2.40 0.08 0.10 A D Figure 15. SAS device plug dimensions (detail) SECTION B - B Savvio 15K.3 SAS Product Manual, Rev. E 61
  • Seagate ST300MP0064 | Savvio 15K.3 SAS Product Manual - Page 70
    connector is illustrated in Figures 14 and 15. 12.4.4 Electrical description SAS drives use the device connector for: • DC power • SAS interface • Activity Volts P15* 12 Volts * - Short pin to support hot plugging NC - No connection in the drive. 62 Savvio 15K.3 SAS Product Manual, Rev. E
  • Seagate ST300MP0064 | Savvio 15K.3 SAS Product Manual - Page 71
    and signal name information. 12.5.1 Ready LED Out The Ready LED Out signal is driven by the drive as indicated in Table 14. Table 14: Ready LED Out conditions Normal command activity Ready LED Meaning bit on and off for 0.5 seconds) Toggles on/off Savvio 15K.3 SAS Product Manual, Rev. E 63
  • Seagate ST300MP0064 | Savvio 15K.3 SAS Product Manual - Page 72
    resistor are external to the drive. See Table 15 for the output characteristics of the LED drive signals. Table 15: LED drive signal State Manual, part number 100293071. For more information about the SCSI commands used by Seagate SAS drives, refer to the Seagate SCSI Commands Reference Manual
  • Seagate ST300MP0064 | Savvio 15K.3 SAS Product Manual - Page 73
    15K.3 SAS Product Manual, Rev. E C set function 49 commands supported 50 condensation 31 condition met/good status 58 connector illustrated 62 requirements 62 continuous vibration 34 cooling 47 CRC error 16 Cryptographic erase 39 cryptographic erase 40 Current profiles 27 customer service
  • Seagate ST300MP0064 | Savvio 15K.3 SAS Product Manual - Page 74
    54 installation 46 guide 6 interface commands supported 50 error rate 15 errors 16 illustrated 59 physical 59 requirements 49 intermediate/condition met/good status 58 intermediate/good status 58 internal data rate 11 internal defects/errors 41 internal drive characteristics 11 IRAW 44 J jumpers 46
  • Seagate ST300MP0064 | Savvio 15K.3 SAS Product Manual - Page 75
    (locked) spindle operation 58 Zero latency read 58 miscellaneous status support ACA active 58 ACA active, faulted initiator 58 Busy 58 /condition met/good 58 Intermediate/good 58 Reservation conflict 58 Task set full 58 miscorrected media data 15 Mode sense data, table 54 Manual, Rev. E 67
  • Seagate ST300MP0064 | Savvio 15K.3 SAS Product Manual - Page 76
    reject 04 49 task set full status 58 TCG 38 technical support services 1 temperature 31, 47 limits 31 non-operating 31 regulation 3 See also cooling terminate task function 49 terminators 46 tracks per inch 11 tracks per surface 11 transmitters 63 transporting the drive 21 Trusted Computing Group
  • Seagate ST300MP0064 | Savvio 15K.3 SAS Product Manual - Page 77
    W warranty 21 WriteLockEnabled 39 Z zero latency read 58 zone bit recording (ZBR) 8 Savvio 15K.3 SAS Product Manual, Rev. E 69
  • Seagate ST300MP0064 | Savvio 15K.3 SAS Product Manual - Page 78
    70 Savvio 15K.3 SAS Product Manual, Rev. E
  • Seagate ST300MP0064 | Savvio 15K.3 SAS Product Manual - Page 79
  • Seagate ST300MP0064 | Savvio 15K.3 SAS Product Manual - Page 80
    Seagate Technology LLC AMERICAS Seagate Technology LLC 10200 South De Anza Boulevard, Cupertino, California 95014, United States, 408-658-1000 ASIA/PACIFIC Seagate Singapore International Headquarters Pte. Ltd. 7000 Ang Mo Kio Avenue 5, Singapore 569877, 65-6485-3888 EUROPE, MIDDLE EAST AND AFRICA
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
Product Manual
Savvio
®
15K.3 SAS
100629381
Rev. E
April 2012
Standard Models
ST9300653SS
ST9146853SS
Self-Encrypting Drive Models
ST9300553SS
ST9146753SS
SED FIPS140-2 Models
ST9300453SS
ST9146653SS