Seagate ST3320613AS Barracuda 7200.11 SATA Product Manual
Seagate ST3320613AS - Barracuda 320 GB Hard Drive Manual
UPC - 836367002872
View all Seagate ST3320613AS manuals
Add to My Manuals
Save this manual to your list of manuals |
Seagate ST3320613AS manual content summary:
- Seagate ST3320613AS | Barracuda 7200.11 SATA Product Manual - Page 1
Product Manual Barracuda 7200.11 Serial ATA ST31500341AS ST31000333AS ST3640323AS ST3640623AS ST3320613AS ST3320813AS ST3160813AS 100507013 Rev. E December 2008 - Seagate ST3320613AS | Barracuda 7200.11 SATA Product Manual - Page 2
. Printed in U.S.A. Publication number: 100507013, Rev. E, December 2008 Seagate, Seagate Technology and the Wave logo are registered trademarks of Seagate Technology LLC in the United States and/or other countries. Barracuda, SeaTools and SeaTDD are either trademarks or registered trademarks of - Seagate ST3320613AS | Barracuda 7200.11 SATA Product Manual - Page 3
Reliability 18 2.11.1 Annualized Failure Rate (AFR) and Mean Time Between Failures (MTBF) Supported ATA commands 29 4.3.1 Identify Device command 31 4.3.2 Set Features command 35 4.3.3 S.M.A.R.T. commands 36 5.0 Seagate Technology support services 37 Barracuda 7200.11 Serial ATA Product Manual - Seagate ST3320613AS | Barracuda 7200.11 SATA Product Manual - Page 4
ii Barracuda 7200.11 Serial ATA Product Manual, Rev. E - Seagate ST3320613AS | Barracuda 7200.11 SATA Product Manual - Page 5
List of Figures Figure 1. Figure 2. Figure 3. Figure 4. Serial ATA connectors 22 Attaching SATA cabling 23 Mounting dimensions (1500, 1000 and 640 GB models 24 Mounting dimensions (320 and 160 GB models 25 Barracuda 7200.11 Serial ATA Product Manual, Rev. E iii - Seagate ST3320613AS | Barracuda 7200.11 SATA Product Manual - Page 6
- Seagate ST3320613AS | Barracuda 7200.11 SATA Product Manual - Page 7
for the following Seagate Barracuda® 7200.11 Serial ATA model drives: ST31500341AS ST3320613AS ST31000333AS ST3320813AS ST3640323AS ST3160813AS ST3640623AS These drives provide the following key features: • 7,200 RPM spindle speed. • High instantaneous (burst) data-transfer rates (up to 300 - Seagate ST3320613AS | Barracuda 7200.11 SATA Product Manual - Page 8
to set any jumpers or other configuration options. • Thinner and more flexible cabling for improved enclosure airflow and ease of installation. • Scalability to higher performance levels. In addition, Serial ATA makes the transition from parallel ATA easy by providing legacy software support - Seagate ST3320613AS | Barracuda 7200.11 SATA Product Manual - Page 9
For convenience, the phrases the drive and this drive are used throughout this manual to indicate the following drive models: ST31500341AS ST3320613AS ST31000333AS ST3320813AS specification measurement or definition, see the appropriate section of this manual. Barracuda 7200.11 Serial ATA Product - Seagate ST3320613AS | Barracuda 7200.11 SATA Product Manual - Page 10
speed Internal data transfer rate Sustained data transfer rate OD I/O data-transfer rate ATA data-transfer modes supported Cache buffer Height (max) Width (max) Length (max) Weight (typical) Average latency Power-on to ready Standby to ready Track-to-track seek time Average seek, read Average seek - Seagate ST3320613AS | Barracuda 7200.11 SATA Product Manual - Page 11
Vibration, operating Vibration, nonoperating Drive acoustics, sound power Idle** Performance Seek Quiet Seek Nonrecoverable read errors Annualized Failure Rate (AFR) Warranty Contact start-stop cycles Supports Hotplug operation per the Serial ATA Revision 2.5 specification ST31500341AS - Seagate ST3320613AS | Barracuda 7200.11 SATA Product Manual - Page 12
speed Internal data transfer rate Sustained data transfer rate OD I/O data-transfer rate ATA data-transfer modes supported Cache buffer Height (max) Width (max) Length (max) Weight (typical) Average latency Power-on to ready Standby to ready Track-to-track seek time Average seek, read Average seek - Seagate ST3320613AS | Barracuda 7200.11 SATA Product Manual - Page 13
specification Vibration, operating Vibration, nonoperating Drive acoustics, sound power Idle** Performance Seek Quiet Seek Nonrecoverable read errors Annualized Failure Rate (AFR) Warranty Contact start-stop cycles Supports Hotplug operation per the Serial ATA Revision 2.5 specification ST3640323AS - Seagate ST3320613AS | Barracuda 7200.11 SATA Product Manual - Page 14
speed Internal data transfer rate Sustained data transfer rate OD I/O data-transfer rate ATA data-transfer modes supported Cache buffer Height (max) Width (max) Length (max) Weight (typical) Average latency Power-on to ready Standby to ready Track-to-track seek time Average seek, read Average seek - Seagate ST3320613AS | Barracuda 7200.11 SATA Product Manual - Page 15
specification Vibration, operating Vibration, nonoperating Drive acoustics, sound power Idle** Performance and Quiet Seek Nonrecoverable read errors Annualized Failure Rate (AFR) Warranty Contact start-stop cycles Supports Hotplug operation per the Serial ATA Revision 2.5 specification ST3320613AS - Seagate ST3320613AS | Barracuda 7200.11 SATA Product Manual - Page 16
data-transfer rate (Mbytes/sec max) ST31500341AS ST31000333AS Serial ATA (SATA) Perpendicular 1462 1300 190 182 277 7,200 ± 0.2% 1709 228 1520 135 120 300 ST3640323AS ST3640623AS 1250 219 1460 115 ST3320613AS ST3320813AS ST3160813AS 10 Barracuda 7200.11 Serial ATA Product Manual, Rev - Seagate ST3320613AS | Barracuda 7200.11 SATA Product Manual - Page 17
average), are expected to meet the noted values. However, due to the manner in which these drives are formatted, benchmark tests that include command overhead or measure logical seeks may produce results that vary from these specifications. Barracuda 7200.11 Serial ATA Product Manual, Rev. E 11 - Seagate ST3320613AS | Barracuda 7200.11 SATA Product Manual - Page 18
up to speed, with servo electronics active and with the heads in a random track location. • Standby mode During Standby mode, the drive accepts commands, but the drive is not spinning, and the servo and read/ write electronics are in power-down mode. 12 Barracuda 7200.11 Serial ATA Product Manual - Seagate ST3320613AS | Barracuda 7200.11 SATA Product Manual - Page 19
) 8.00 0.293 0.470 Standby 1.0 0.15 0.015 Sleep 1.0 0.15 0.015 *During periods of drive idle, some offline activity may occur according to the S.M.A.R.T. specification, which may increase acoustic and power to operational levels Barracuda 7200.11 Serial ATA Product Manual, Rev. E 13 - Seagate ST3320613AS | Barracuda 7200.11 SATA Product Manual - Page 20
mode with all current translation parameters intact. • Idle and Standby timers Each time the drive performs an Active function (read, write or seek), the standby timer is reinitialized and begins counting down from its specified delay times to zero. If the standby timer reaches zero before any - Seagate ST3320613AS | Barracuda 7200.11 SATA Product Manual - Page 21
shock These drives comply with the performance levels specified in this document when subjected to a maximum operating shock of 70 Gs based on half-sine shock pulses of 2 msec. Shocks should not be repeated more than two times per second. Barracuda 7200.11 Serial ATA Product Manual, Rev. E 15 - Seagate ST3320613AS | Barracuda 7200.11 SATA Product Manual - Page 22
vibration levels that the drive may experience without incurring physical damage or degradation in performance when subsequently put into operation are specified below. 5-22 Hz 22-350 Hz 350-500 Hz 2.0 Gs (limited displacement) 5.0 Gs 2.0 Gs 16 Barracuda 7200.11 Serial ATA Product Manual, Rev. E - Seagate ST3320613AS | Barracuda 7200.11 SATA Product Manual - Page 23
seek mode tests, the drive is placed in seek mode only. The number of seeks per second is defined by the following equation: (Number of seeks per second = 0.4 / (average latency + average access time Seagate : ± 8 kV Performance level B 80 to Barracuda 7200.11 Serial ATA Product Manual, Rev. E 17 - Seagate ST3320613AS | Barracuda 7200.11 SATA Product Manual - Page 24
Reliability 2.11.1 Annualized Failure Rate (AFR) and Mean Time Between Failures (MTBF) The product shall achieve an Annualized Failure Rate (AFR) of 0.34% (MTBF warranty information for your drive. None required. 2.12 Agency certification 2.12.1 Safety certification The drives are recognized - Seagate ST3320613AS | Barracuda 7200.11 SATA Product Manual - Page 25
with the Electromagnetic Interference/Electromagnetic Susceptibility (EMI/EMS) for Class B products. Drives are tested in a representative, end-user system by a Korean-recognized lab. • Family name: Barracuda 7200.11 • Certificate number: 1500 GB1000 GB640 GB320 GB160 GB- STX-720011 (B) STX - Seagate ST3320613AS | Barracuda 7200.11 SATA Product Manual - Page 26
, such as vulcanized rubber, that can outgas corrosive compounds should be minimized or eliminated. The useful life of any electronic equipment may be extended by replacing materials near circuitry with sulfide-free alternatives. 20 Barracuda 7200.11 Serial ATA Product Manual, Rev. E - Seagate ST3320613AS | Barracuda 7200.11 SATA Product Manual - Page 27
circuit board. • Do not remove the factory-installed labels from the drive or cover them with additional labels. Removal voids the warranty. Some factory-installed labels contain information needed to service the drive. Other labels are used to seal out dirt and contamination. Barracuda 7200 - Seagate ST3320613AS | Barracuda 7200.11 SATA Product Manual - Page 28
Limit data transfer rate to 1.5 Gbits per second Jumper block SATA power connector SATA interface connector Figure 1. Serial ATA connectors Note. 1.5Gbits jumper block only applies to ST3320613AS, ST3320813AS and ST3160813AS models. 22 Barracuda 7200.11 Serial ATA Product Manual, Rev - Seagate ST3320613AS | Barracuda 7200.11 SATA Product Manual - Page 29
the drive as illustrated in Figure 2. Signal connector Power connector Signal cable Power cable Figure 2. Attaching SATA cabling Each cable is keyed to ensure correct orientation. Barracuda 7200.11 Serial ATA drives support latching SATA connectors. Barracuda 7200.11 Serial ATA Product Manual - Seagate ST3320613AS | Barracuda 7200.11 SATA Product Manual - Page 30
4.000 (101.6) 4.000 (101.60) .814 (20.676) CL of conn. Datum B 2.00 (50.80) CL of drive [1] 2 x 3.750 (2 x 95.25) .250 + .015 (6.35 + .381) (3x both sides) 1.028 max location Figure 3. Mounting dimensions (1500, 1000 and 640 GB models) 24 Barracuda 7200.11 Serial ATA Product Manual, Rev. E - Seagate ST3320613AS | Barracuda 7200.11 SATA Product Manual - Page 31
Figure 4. Mounting dimensions (320 and 160 GB models) Barracuda 7200.11 Serial ATA Product Manual, Rev. E 25 - Seagate ST3320613AS | Barracuda 7200.11 SATA Product Manual - Page 32
26 Barracuda 7200.11 Serial ATA Product Manual, Rev. E - Seagate ST3320613AS | Barracuda 7200.11 SATA Product Manual - Page 33
transfers. It supports ATA programmed input/output (PIO) modes 0-4; multiword DMA modes 0-2, and Ultra DMA modes 0-6. For detailed information about the Serial ATA interface, refer to the "Serial ATA: High Speed Serialized AT Attachment" specification. 4.1 Hot-Plug compatibility Barracuda 7200 - Seagate ST3320613AS | Barracuda 7200.11 SATA Product Manual - Page 34
pre-charge, 2nd mate 5V power 5V power 2nd mate P11 Ground or LED signal If grounded, drive does not use deferred spin P12 Ground 1st mate. P13 V12 P14 V12 P15 V12 12V power, . 4. All used voltage pins (Vx) must be terminated. 28 Barracuda 7200.11 Serial ATA Product Manual, Rev. E - Seagate ST3320613AS | Barracuda 7200.11 SATA Product Manual - Page 35
ATA commands The following table lists Serial ATA standard commands that the drive supports. For a detailed description of the ATA commands, refer to the Serial ATA International Organization: F8H 27H 20H 24H 21H 40H 42H 41H 10H F6H F3H Barracuda 7200.11 Serial ATA Product Manual, Rev. E 29 - Seagate ST3320613AS | Barracuda 7200.11 SATA Product Manual - Page 36
B0H / D0H B0H / D5H B0H / DAH B0H / D3H B0H / D6H E2H E0H E8H CAH 35H CDH CBH 3FH C5H 39H CEH 30H 31H 34H 30 Barracuda 7200.11 Serial ATA Product Manual, Rev. E - Seagate ST3320613AS | Barracuda 7200.11 SATA Product Manual - Page 37
in sectors Number of sectors transferred during a Read Multiple or Write Multiple command Value 0C5AH 16,383 0000H 16 0000H 0000H 003FH 0000H ASCII 0000H 0400H 0000H x.xx 8010H 0000H 2F00H 0000H 0200H 0200H 0007H xxxxH xxxxH xxxxH xxxxH xxxxH Barracuda 7200.11 Serial ATA Product Manual, Rev. E 31 - Seagate ST3320613AS | Barracuda 7200.11 SATA Product Manual - Page 38
Minor version number Command sets supported Command sets supported Command sets support extension (see note following this table) Command sets enabled Command sets enabled Command sets enable extension Ultra DMA support and current mode (see note following this table) Security erase time Enhanced - Seagate ST3320613AS | Barracuda 7200.11 SATA Product Manual - Page 39
WRITE DMA QUEUED FUA EXT command is supported. 8 64-bit World Wide Name is supported. 9-10 Obsolete. 11-12 Reserved for TLC. 13 IDLE IMMEDIATE command with IUNLOAD faeture is supported. 14 Shall be set to 1. 15 Shall be cleared to 0. Barracuda 7200.11 Serial ATA Product Manual, Rev. E 33 - Seagate ST3320613AS | Barracuda 7200.11 SATA Product Manual - Page 40
supported. 1 Ultra DMA mode 1 is supported. 2 Ultra DMA mode 2 is supported. 3 Ultra DMA mode 3 is supported. 4 Ultra DMA mode 4 is supported. 5 Ultra DMA mode 5 is supported. 6 Ultra DMA mode 6 is supported 6 is currently active. 34 Barracuda 7200.11 Serial ATA Product Manual, Rev. E - Seagate ST3320613AS | Barracuda 7200.11 SATA Product Manual - Page 41
of SATA features AAH Enable read look-ahead (read cache) feature (default). F1H Report full capacity available Note. At power-on, or after a hardware or software reset, the default values of the features are as indicated above. Barracuda 7200.11 Serial ATA Product Manual, Rev. E 35 - Seagate ST3320613AS | Barracuda 7200.11 SATA Product Manual - Page 42
drive returns. The diagnostic software ships with all new drives and is also available at: http://seatools.seagate.com. This drive is shipped with S.M.A.R.T. features disabled. You must have a recent BIOS or software package that supports . 36 Barracuda 7200.11 Serial ATA Product Manual, Rev. E - Seagate ST3320613AS | Barracuda 7200.11 SATA Product Manual - Page 43
Internet For information regarding Seagate products and services, visit www.seagate.com. Worldwide support is available 24 hours daily by email for your questions. Presales Support: [email protected] Technical Support: [email protected] Warranty Support: http://www.seagate.com/www/en-us - Seagate ST3320613AS | Barracuda 7200.11 SATA Product Manual - Page 44
issues. Resellers or end users of drive products should contact their place of purchase or Seagate warranty service for assistance. Have your serial number and model or part number available. Data Recovery Services Seagate offers data recovery services for all formats and all brands of storage media - Seagate ST3320613AS | Barracuda 7200.11 SATA Product Manual - Page 45
Track 29 Formatted capacity 10 G geometry 10 Gs 16 guaranteed sectors 10 D data-transfer rates 1 DC power 12 Default logical geometry 10 density 10 Device Configuration Freeze Lock 29 H Handling precautions 21 heads 10 height 11 humidity 15 Barracuda 7200.11 Serial ATA Product Manual, Rev. E 39 - Seagate ST3320613AS | Barracuda 7200.11 SATA Product Manual - Page 46
master/slave 2 maximum temperature 15 Mean Time Between Failures 18 MIC 19 mounting 24 mounting screws 15 mounting the drive 21 MTBF 18 N noise 14 nominal power 11 Nonoperating Recording technology 10 relative humidity 15 Reliability 18 RF 17 40 Barracuda 7200.11 Serial ATA Product Manual, Rev. E - Seagate ST3320613AS | Barracuda 7200.11 SATA Product Manual - Page 47
support services 37 temperature 11, 15 temperature gradient 15 timer 14 timers 14 track density 10 Track-to-track 11 Track-to-track seek time 11 tunneling magnetoresistive (TMR) recording heads 1 U UL 1950 18 V Vibration 16 voltage 12 Voltage dips, interrupts 17 Voltage tolerance 14 W Warranty - Seagate ST3320613AS | Barracuda 7200.11 SATA Product Manual - Page 48
42 Barracuda 7200.11 Serial ATA Product Manual, Rev. E - Seagate ST3320613AS | Barracuda 7200.11 SATA Product Manual - Page 49
- Seagate ST3320613AS | Barracuda 7200.11 SATA Product Manual - Page 50
Seagate Technology LLC 920 Disc Drive, Scotts Valley, California 95066-4544, USA Publication Number: 100507013, Rev. E, Printed in U.S.A.
Product Manual
Barracuda 7200.11 Serial ATA
100507013
Rev. E
December 2008
ST31500341AS
ST31000333AS
ST3640323AS
ST3640623AS
ST3320613AS
ST3320813AS
ST3160813AS