Seagate ST9300553SS Savvio 15K.3 SAS Product Manual

Seagate ST9300553SS Manual

Get Seagate ST9300553SS PDF manuals and user guides View all Seagate ST9300553SS manuals
Add to My Manuals
Save this manual to your list of manuals

Seagate ST9300553SS manual content summary:

  • Seagate ST9300553SS | Savvio 15K.3 SAS Product Manual - Page 1
    Product Manual Savvio® 15K.3 SAS Standard Models ST9300653SS ST9146853SS Self-Encrypting Drive Models ST9300553SS ST9146753SS SED FIPS140-2 Models ST9300453SS ST9146653SS 100629381 Rev. D January 2012
  • Seagate ST9300553SS | Savvio 15K.3 SAS Product Manual - Page 2
    or registered trademarks are the property of their respective owners. No part of this publication may be reproduced in any form without written permission of Seagate Technology LLC. Call 877-PUB-TEK1 (877-782-8351) to request permission. One gigabyte, or GB, equals one billion bytes and one terabyte
  • Seagate ST9300553SS | Savvio 15K.3 SAS Product Manual - Page 3
    Contents 1.0 Seagate Technology support services 1 2.0 Scope 2 3.0 Applicable standards and reference drive 16 6.2.4 S.M.A.R.T 17 6.2.5 Thermal monitor 18 6.2.6 Drive Self Test (DST 19 6.2.7 Product warranty 21 7.0 Physical/electrical specifications 22 7.1 PowerChoiceTM power management
  • Seagate ST9300553SS | Savvio 15K.3 SAS Product Manual - Page 4
    39 9.7 Authenticated firmware download 39 9.8 Power requirements 40 9.9 Supported commands 40 9.10 Sanitize - CRYPTOGRAPHIC ERASE 40 9.11 RevertSP 40 10.0 Defect and error management 41 10.1 Drive internal defects/errors 41 10.2 Drive error recovery procedures 41 10.3 SAS system errors 42
  • Seagate ST9300553SS | Savvio 15K.3 SAS Product Manual - Page 5
    .5 Signal characteristics 63 12.5.1 Ready LED Out 63 12.5.2 Differential signals 64 12.6 SAS-2 Specification compliance 64 12.7 Additional information 64 Savvio 15K.3 SAS Product Manual, Rev. D iii
  • Seagate ST9300553SS | Savvio 15K.3 SAS Product Manual - Page 6
    iv Savvio 15K.3 SAS Product Manual, Rev. D
  • Seagate ST9300553SS | Savvio 15K.3 SAS Product Manual - Page 7
    flow 47 Physical interface 59 SAS device plug dimensions 60 SAS device plug dimensions (detail 61 SAS transmitters and receivers 63 Savvio 15K.3 SAS Product Manual, Rev. D v
  • Seagate ST9300553SS | Savvio 15K.3 SAS Product Manual - Page 8
  • Seagate ST9300553SS | Savvio 15K.3 SAS Product Manual - Page 9
    /support/warranty_&_returns_assistance For information regarding Data Recovery Services, visit http://www.i365.com For Seagate OEM & Distribution partner portal, visit https://direct.seagate.com/portal/system For Seagate reseller portal, visit http://spp.seagate.com Savvio 15K.3 SAS Product Manual
  • Seagate ST9300553SS | Savvio 15K.3 SAS Product Manual - Page 10
    Engineer (FAE) or our global support services group as shown in Section 1.0. Unless otherwise stated, the information in this manual applies to standard and Self-Encrypting Drive models. Model Number ST9300653SS ST9300553SS ST9300453SS ST9146853SS ST9146753SS ST9146653SS Self-Encrypting
  • Seagate ST9300553SS | Savvio 15K.3 SAS Product Manual - Page 11
    must meet the requirements of Section 11.3 3.1 Standards The Savvio family complies with Seagate standards as noted in the appropriate sections of this manual and the Seagate SAS Interface Manual, part number 100293071. The drives are recognized in accordance with UL 60950-1 as tested by UL, CSA
  • Seagate ST9300553SS | Savvio 15K.3 SAS Product Manual - Page 12
    Printer • Mouse Although the test system with this Seagate model complies with the directives/standards, we cannot Framework requirements of Australia's Spectrum Management Agency (SMA). Korean KCC If these drives have the Korean Communications Commission ( 15K.3 SAS Product Manual, Rev. D
  • Seagate ST9300553SS | Savvio 15K.3 SAS Product Manual - Page 13
    effective July 2006. A number of parts and materials in Seagate products are procured from external suppliers. We rely on the declarations for all parts and materials for the disk drives documented in this publication. Current supplier declarations include 15K.3 SAS Product Manual, Rev. D 5
  • Seagate ST9300553SS | Savvio 15K.3 SAS Product Manual - Page 14
    3.2 Reference documents SAS Interface Manual Seagate part number: 100293071 SCSI Commands Reference Manual Seagate part number: 100293068 Self-Encrypting Drives Reference Manual Seagate part number: 100515636 ANSI SAS Documents SFF-8323 3.5" Drive Form Factor with Serial Connector SFF-8460
  • Seagate ST9300553SS | Savvio 15K.3 SAS Product Manual - Page 15
    support the Serial Attached SCSI Protocol as described in the ANSI specifications, this document, and the SAS Interface Manual (part number 100293071) which describes the general interface characteristics of this drive. Savvio drives with either SAS or SATA hard disk drives. This allows you to
  • Seagate ST9300553SS | Savvio 15K.3 SAS Product Manual - Page 16
    drives have the following standard features: • Perpendicular recording technology • 1.5 / 3 / 6 Gb Serial Attached SCSI (SAS) interface • Integrated dual port SAS controller supporting the SCSI protocol • Support set (queue) • Supports up to 32 applied to the drive • Zone bit recording drive
  • Seagate ST9300553SS | Savvio 15K.3 SAS Product Manual - Page 17
    processing of queue • Supports start and stop Encrypting Drive and standard (nonSelf-Encrypting Drive) Seagate recommends product planning in one of two modes: Seagate designs capacity points at certain block sizes that Seagate ST9300653SS ST9300553SS ST9300453SS Sector Size Manual, Rev. D 9
  • Seagate ST9300553SS | Savvio 15K.3 SAS Product Manual - Page 18
    table in the SAS Interface Manual, part number 100293071. A value of zero in the Number of Blocks field indicates that the drive will not change the the maximum number of LBAs in the Number of Blocks field changes the total drive capacity to the value in the Number of Blocks field. A value greater
  • Seagate ST9300553SS | Savvio 15K.3 SAS Product Manual - Page 19
    drives. 5.1 Internal drive characteristics Drive capacity Read/write data heads Tracks per surface (total) Tracks per in Peak bits per in Areal density Internal data rate Disk rotation speed Avg rotational latency ST9300653SS ST9300553SS ST9300453SS the SAS Interface Manual (part number 100293071
  • Seagate ST9300553SS | Savvio 15K.3 SAS Product Manual - Page 20
    to or from the host. ** MiB/s x 1.048 = MB/s 5.3 Start/stop time The drive accepts the commands listed in the SAS Interface Manual less than 3 seconds after DC power has been applied. If the drive receives a NOTIFY (ENABLE SPINUP) primitive through either port and has not received a START STOP
  • Seagate ST9300553SS | Savvio 15K.3 SAS Product Manual - Page 21
    . The drive keeps track of the logical block addresses of the data stored in each segment of the buffer. If the cache is enabled (see RCD bit in the SAS Interface Manual), data requested by the host with a read command is retrieved from the buffer, if possible, before any disk access is initiated
  • Seagate ST9300553SS | Savvio 15K.3 SAS Product Manual - Page 22
    drive drive does not overwrite data drive drive drive. 5.5.2 Prefetch operation If the Prefetch feature is enabled, data in contiguous logical blocks on the disk The drive does drive enables prefetch of contiguous blocks from the disk when it senses that a prefetch hit will likely occur. The drive
  • Seagate ST9300553SS | Savvio 15K.3 SAS Product Manual - Page 23
    The error rates stated in this manual assume the following: • The drive is operated in accordance with this manual using DC power as defined in as a failure of the drive to recover data from the media. These errors occur due to head/media or write problems. Unrecoverable data errors are only
  • Seagate ST9300553SS | Savvio 15K.3 SAS Product Manual - Page 24
    classified as drive failures. service You can enhance the reliability of Savvio disk drives by ensuring that the drive drive looses sync, the drive initiated link reset. The drive self-test fails, the drive does not respond to drive carrier prior to inserting it into the system. Caution. The drive
  • Seagate ST9300553SS | Savvio 15K.3 SAS Product Manual - Page 25
    every hour subject to an idle period on the drive interfaces. The process of measuring off-line attribute data and saving data to the disk is uninterruptable. The maximum on-line only processing delay . This counter is referred to as the Failure Counter. Savvio 15K.3 SAS Product Manual, Rev. D 17
  • Seagate ST9300553SS | Savvio 15K.3 SAS Product Manual - Page 26
    of 01-0B01 when the temperature exceeds the specified limit in compliance with the SCSI standard. The drive temperature is reported in the FRU code field of mode sense data. You can use this information 0001h Primary Temperature Reference Temperature 18 Savvio 15K.3 SAS Product Manual, Rev. D
  • Seagate ST9300553SS | Savvio 15K.3 SAS Product Manual - Page 27
    encounters an error during either of these tests, it reports a fault condition. If the drive fails the test, remove it from service and return it to Seagate for service. 6.2.6.1 DST failure definition The drive will present a "diagnostic failed" condition through the self-tests results value of the
  • Seagate ST9300553SS | Savvio 15K.3 SAS Product Manual - Page 28
    The purpose of the short test is to provide a time-limited test that tests as much of the drive as possible within 120 seconds. The short test does not scan the entire media surface, but does some test routine was interrupted by a reset condition). 20 Savvio 15K.3 SAS Product Manual, Rev. D
  • Seagate ST9300553SS | Savvio 15K.3 SAS Product Manual - Page 29
    an air-ride carrier experienced in handling computer equipment. Product repair and return information Seagate customer service centers are the only facilities authorized to service Seagate drives. Seagate does not sanction any third-party repair facilities. Any unauthorized repair or tampering with
  • Seagate ST9300553SS | Savvio 15K.3 SAS Product Manual - Page 30
    drive. 7.1 PowerChoiceTM power management Drives using the CSS architecture have limited power management capability. The table below lists the supported disks not spinning) PowerChoice can be invoked using only the Start Stop Unit command for drives the drive to any supported PowerChoice mode
  • Seagate ST9300553SS | Savvio 15K.3 SAS Product Manual - Page 31
    Supported power drive controller ASIC is enabled and functional in the SED models. This represents a small additional drain on the 5V supply of about 30mA and a commensurate increase of about 150mW in power consumption. There is no additional drain on the 12V supply. Savvio 15K.3 SAS Product Manual
  • Seagate ST9300553SS | Savvio 15K.3 SAS Product Manual - Page 32
    1.43 1.36 0.59 0.38 0.66 0.40 1.26 1.34 0.89 0.25 0.97 0.25 1.31 0.48 1.05 0.25 1.10 0.25 1.40 0.42 24 Savvio 15K.3 SAS Product Manual, Rev. D
  • Seagate ST9300553SS | Savvio 15K.3 SAS Product Manual - Page 33
    supply at nominal voltage. N (number of drives tested) = 6, 35 Degrees C ambient. the drive signifies that its power-up sequence has been completed and that the drive is completes but before the drive has received the Notify reads. [7] During idle, the drive heads are relocated every 60 seconds
  • Seagate ST9300553SS | Savvio 15K.3 SAS Product Manual - Page 34
    to multiple drives from a common supply, careful consideration for individual drive power given below are peak-to-peak measurements and apply at the drive power connector. +5V +12V = 250 mV pp from 100 The drive does not require power sequencing. The drive protects against inadvertent writing during power-up
  • Seagate ST9300553SS | Savvio 15K.3 SAS Product Manual - Page 35
    7.3.3 Current profiles The +12V and +5V current profiles for the Savvio 15K.3 SAS drives are shown below. Figure 1. Current profile for 300GB models. Savvio 15K.3 SAS Product Manual, Rev. D 27
  • Seagate ST9300553SS | Savvio 15K.3 SAS Product Manual - Page 36
    Figure 2. Current profile for 146GB models Note: All times and currents are typical. See Tables 2 and 3 for maximum current requirements. 28 Savvio 15K.3 SAS Product Manual, Rev. D
  • Seagate ST9300553SS | Savvio 15K.3 SAS Product Manual - Page 37
    operations, refer to the following I/O rate curve (see Figure 3). Locate the typical I/O rate for a drive in your system on the horizontal axis and read the corresponding +5 volt current, +12 volt current, and power vs. input/output operations per second Savvio 15K.3 SAS Product Manual, Rev. D 29
  • Seagate ST9300553SS | Savvio 15K.3 SAS Product Manual - Page 38
    operations, refer to the following I/O rate curve (see Figure 3). Locate the typical I/O rate for a drive in your system on the horizontal axis and read the corresponding +5 volt current, +12 volt current, and power vs. input/output operations per second 30 Savvio 15K.3 SAS Product Manual, Rev. D
  • Seagate ST9300553SS | Savvio 15K.3 SAS Product Manual - Page 39
    the drive is packaged in the shipping container designed by Seagate for use with drive. HDA drive occurs. a. Operating 5% to 95% non-condensing relative humidity with a maximum gradient of 20% per hour. b. Non-operating 5% to 95% non-condensing relative humidity. Savvio 15K.3 SAS Product Manual
  • Seagate ST9300553SS | Savvio 15K.3 SAS Product Manual - Page 40
    to minimize freight costs and ease material handling. Seagate finished drive bulk packs may be shipped individually. For less than full shipments, instructions are printed on the bulk pack carton for minimum drive quantities and proper drive placement 32 Savvio 15K.3 SAS Product Manual, Rev. D
  • Seagate ST9300553SS | Savvio 15K.3 SAS Product Manual - Page 41
    mounting Note. Image is for reference only, may not represent actual drive. 7.5.4.2 Vibration a. Operating-normal The drive as installed for normal operation, shall comply with the complete specified This assumes system recovery routines are available. Savvio 15K.3 SAS Product Manual, Rev. D 33
  • Seagate ST9300553SS | Savvio 15K.3 SAS Product Manual - Page 42
    isolated drives and integrated drives. The drive shall not Seagate electronic drive drive component reliability can be affected by the installation environment. The silver, copper, nickel and gold films used in Seagate typical drives when measured according to Seagate specification 30553-001. There
  • Seagate ST9300553SS | Savvio 15K.3 SAS Product Manual - Page 43
    7.6 Mechanical specifications Refer to Figure 9 for detailed mounting configuration dimensions. See Section 11.3, "Drive mounting." Weight: 300GB models: 0.441 lb 146GB models: 0.426 lb 0.200 Kg 0.193 .org. in mm in mm in mm Figure 9. Dimensions Savvio 15K.3 SAS Product Manual, Rev. D 35
  • Seagate ST9300553SS | Savvio 15K.3 SAS Product Manual - Page 44
    perform cryptographic module compliance/conformance testing. Seagate Enterprise SED The SEDs referenced in this Product Manual have been validated by CMVP and have an operator to assume a specific role and perform a corresponding set of services. 36 Savvio 15K.3 SAS Product Manual, Rev. D
  • Seagate ST9300553SS | Savvio 15K.3 SAS Product Manual - Page 45
    Figure 10. Example of FIPS tamper evidence labels/seals. Note. Image is for reference only, may not represent actual drive. Savvio 15K.3 SAS Product Manual, Rev. D 37
  • Seagate ST9300553SS | Savvio 15K.3 SAS Product Manual - Page 46
    Seagate's SED models comply with the standards published by the TCG. To use the security features in the drive drive in their command payloads. 9.1 Data encryption Encrypting drives the drive, never leaves the drive, and drive security services drive owner can define up to 16 data bands on the drive
  • Seagate ST9300553SS | Savvio 15K.3 SAS Product Manual - Page 47
    Authenticated firmware download In addition to providing a locking mechanism to prevent unwanted firmware download attempts, the drive also only accepts download files which have been cryptographically signed by the appropriate Seagate Design Center. Savvio 15K.3 SAS Product Manual, Rev. D 39
  • Seagate ST9300553SS | Savvio 15K.3 SAS Product Manual - Page 48
    drive. Sanitize CRYPTOGRAPHIC ERASE is a SCSI CDB Op code 48h and selecting the service action code 3 (CRYPTOGRAPHIC ERASE) 9.11 RevertSP SED models will support on the drive label must be provided. PSID is not electronically accessible and can only be manually read from the drive label or
  • Seagate ST9300553SS | Savvio 15K.3 SAS Product Manual - Page 49
    mode page. Error recovery and defect management may involve using several SCSI commands described in the SAS Interface Manual. The drive implements selectable error recovery time limits required in video applications. The error recovery scheme supported by the drive provides a way to control the
  • Seagate ST9300553SS | Savvio 15K.3 SAS Product Manual - Page 50
    a single reread or re-write attempt. The maximum level used by the drive in LBA recovery is determined by the read and write retry counts. Table drive. Status returned by the drive to the initiator is described in the SAS Interface Manual. Status reporting plays a role in systems error management
  • Seagate ST9300553SS | Savvio 15K.3 SAS Product Manual - Page 51
    drive is idle. In RAID arrays, BMS allows hot spare drives to be scanned for defects prior to being put into service by the host system. On regular duty drives drive service drive the drive proceeds disk. drive goes to idle during the Pre-Scan period. In the event that the drive drive drive Seagate factory
  • Seagate ST9300553SS | Savvio 15K.3 SAS Product Manual - Page 52
    bits can be managed at the HBA and HBA driver level. Allowing a system that typically does not support 520 LBA formats a read command. Type 3 - Seagate products do not support Type 3. 10.8.2 Setting and determining the current Type Level A drive is initialized to a type of PI Manual, Rev. D
  • Seagate ST9300553SS | Savvio 15K.3 SAS Product Manual - Page 53
    Descriptor (VPD) page 0x86 provides bits to indicate the PI Types supported and which PI fields the drive supports checking. Note. For further details with respect to PI, please refer to SCSI Block Commands - 3 (SBC-3) Draft Standard documentation. Savvio 15K.3 SAS Product Manual, Rev. D 45
  • Seagate ST9300553SS | Savvio 15K.3 SAS Product Manual - Page 54
    The drive may be mounted in any orientation. All drive performance characterizations, however, have been done with the drive in horizontal (disks level) and vertical (drive on its side) orientations, which are the two preferred mounting orientations. 46 Savvio 15K.3 SAS Product Manual, Rev
  • Seagate ST9300553SS | Savvio 15K.3 SAS Product Manual - Page 55
    Temperature." The rack, cabinet, or drawer environment for the drive must provide heat removal from the electronics and head and disk assembly (HDA). You should confirm that adequate heat removal HDA may not represent actual product, for reference only. Savvio 15K.3 SAS Product Manual, Rev. D 47
  • Seagate ST9300553SS | Savvio 15K.3 SAS Product Manual - Page 56
    you mount the drive using the bottom holes, ensure that you do not physically distort the drive by attempting to in the drive and cannot be separated by the user. The equipment in which the drive is mounted is electrically isolating) method of mounting the drive in the host equipment. Increased
  • Seagate ST9300553SS | Savvio 15K.3 SAS Product Manual - Page 57
    the SAS Interface Manual (part number 100293071). 12.1 SAS features This section lists the SAS-specific features supported by Savvio drives. 12.1.1 Task management functions Table 5 lists the SAS task management functions supported. Table 5: SAS task management functions supported Task name
  • Seagate ST9300553SS | Savvio 15K.3 SAS Product Manual - Page 58
    run at 6Gb/s while the second port runs at 3Gb/s.) The supported link rates are 1.5, 3.0, or 6.0 Gb/s. Subject to buffer availability, the Savvio drives support: • Concurrent port transfers-The drive supports receiving COMMAND, TASK management transfers on both ports at the same time. • Full duplex
  • Seagate ST9300553SS | Savvio 15K.3 SAS Product Manual - Page 59
    (0Ch) Protocol-Specific Port page (19h) Power Condition page (1Ah) Rigid Disk Drive Geometry page (04h) Unit Attention page (00h) Verify Error Recovery page Supported N Y Y Y N Y Y N N N Y Y Y N Y Y Y Y Y Y [2] Y Y [2] Y Y Y Y Y Y Y N Y Y Y Y Y N Y Y Y N Y Y Savvio 15K.3 SAS Product Manual, Rev.
  • Seagate ST9300553SS | Savvio 15K.3 SAS Product Manual - Page 60
    57h A0h 03h 16h 56h 01h 48h 31h 30h 32h A2h B5h 0Bh 2Bh 1Dh 33h Supported Y Y N Y N Y (non-SED drives only) Y Y Y Y Y (non-SED drives only) Y Y Y Y Y Y Y Y Y Y Y Y Y Y N Y Y N Y Y (SED drives only) N N N Y (SED drives only) Y (SED drives only) Y Y Y Y Y N Savvio 15K.3 SAS Product Manual, Rev. D
  • Seagate ST9300553SS | Savvio 15K.3 SAS Product Manual - Page 61
    mode pages supported. [4] Y = Yes. Command is supported. N = No. Command is not supported. A = Support is available on special request. [5] Approximately 1.5 increase in time to complete this command for a SED drive versus a non-SED drive of the same capacity. Savvio 15K.3 SAS Product Manual, Rev
  • Seagate ST9300553SS | Savvio 15K.3 SAS Product Manual - Page 62
    drive should return to the initiator per the format given in the SAS Interface Manual ** SCSI Revision support. See the ST9300453SS drive to report its operating parameters to the initiator. The drive maintains four sets of mode parameters: 1. Default values Default values are hard-coded in the drive
  • Seagate ST9300553SS | Savvio 15K.3 SAS Product Manual - Page 63
    are installed from saved or default values after a power on reset, hard reset, or Bus Device Reset message. 4. Changeable values Changeable values the drive in response to the Mode Sense command pages for SCSI implementation (see the SAS Interface Manual ). DEF = Default value. Standard OEM drives
  • Seagate ST9300553SS | Savvio 15K.3 SAS Product Manual - Page 64
    Table 9: Mode Sense data default and changeable values for 300GB drives MODE DATA HEADER: 00 00 05 12 8B 01 30 02 MODE PAGES: DEF 81 0A C0 14 FF 00 00 00 05 00 FF FF FF DEF 80 06 00 80 0F 00 00 00 CHG 80 06 B7 C0 8F 00 00 00 56 Savvio 15K.3 SAS Product Manual, Rev. D
  • Seagate ST9300553SS | Savvio 15K.3 SAS Product Manual - Page 65
    Table 10: Mode Sense data default and changeable values for 146GB drives MODE DATA HEADER: 00 00 05 12 8B 01 30 02 MODE PAGES: DEF 81 0A C0 14 FF 00 00 00 05 00 FF FF FF FF DEF 80 06 00 80 0F 00 00 00 CHG 80 06 B7 C0 8F 00 00 00 Savvio 15K.3 SAS Product Manual, Rev. D 57
  • Seagate ST9300553SS | Savvio 15K.3 SAS Product Manual - Page 66
    support column indicates the feature or condition is supported. An "N" in the support column indicates the feature or condition is not supported. Table 11: Miscellaneous features Supported 128 queue tags supported) Deferred error Table 12: Miscellaneous status Supported Y Status Good Y Check
  • Seagate ST9300553SS | Savvio 15K.3 SAS Product Manual - Page 67
    15 provide the dimensions of the SAS connector. Details of the physical, electrical, and logical characteristics are provided within this section. The operational aspects of Seagate's SAS drives are provided in the SAS Interface Manual. Figure 13. Physical interface Savvio 15K.3 SAS Product
  • Seagate ST9300553SS | Savvio 15K.3 SAS Product Manual - Page 68
    ) 5.08 B 0.84 0.05 (22X) 0.15 B 4.90 0.08 P15 P1 S1 S7 CL OF DATUM B Figure 14. SAS device plug dimensions 60 Savvio 15K.3 SAS Product Manual, Rev. D
  • Seagate ST9300553SS | Savvio 15K.3 SAS Product Manual - Page 69
    A 0.03 1.23 0.05 65 30 0.08 0.05 Detail 2 1.90 0.08 2.40 0.08 0.10 A D Figure 15. SAS device plug dimensions (detail) SECTION B - B Savvio 15K.3 SAS Product Manual, Rev. D 61
  • Seagate ST9300553SS | Savvio 15K.3 SAS Product Manual - Page 70
    connector is illustrated in Figures 14 and 15. 12.4.4 Electrical description SAS drives use the device connector for: • DC power • SAS interface • Activity Volts P15* 12 Volts * - Short pin to support hot plugging NC - No connection in the drive. 62 Savvio 15K.3 SAS Product Manual, Rev. D
  • Seagate ST9300553SS | Savvio 15K.3 SAS Product Manual - Page 71
    and signal name information. 12.5.1 Ready LED Out The Ready LED Out signal is driven by the drive as indicated in Table 14. Table 14: Ready LED Out conditions Normal command activity Ready LED Meaning bit on and off for 0.5 seconds) Toggles on/off Savvio 15K.3 SAS Product Manual, Rev. D 63
  • Seagate ST9300553SS | Savvio 15K.3 SAS Product Manual - Page 72
    , and Applications layers of the SAS interface, refer to the Seagate SAS Interface Manual, part number 100293071. For more information about the SCSI commands used by Seagate SAS drives, refer to the Seagate SCSI Commands Reference Manual, part number 100293068. 64 Savvio 15K.3 SAS Product
  • Seagate ST9300553SS | Savvio 15K.3 SAS Product Manual - Page 73
    space 13 busy status 58 Savvio 15K.3 SAS Product Manual, Rev. D C cache operation 13 cache segments task set function 49 commands supported 50 condensation 31 condition met/ erase 40 Current profiles 27 customer service 21 D DAR 43 Data Bands management 41 defects 41 Deferred Auto-Reallocation 43 deferred
  • Seagate ST9300553SS | Savvio 15K.3 SAS Product Manual - Page 74
    38 error management 41 rates 47, 48 head and disk assembly (HDA) 7 head and disk assembly. See HDA heads read/ drive 16 humidity 31 humidity limits 31 I Identifying a PI drive 45 Idle Read After Write 44 Idle1 22 Idle2 22 Idle3 22 inquiry data 54 installation 46 guide 6 interface commands supported
  • Seagate ST9300553SS | Savvio 15K.3 SAS Product Manual - Page 75
    Synchronized (locked) spindle operation 58 Zero latency read 58 miscellaneous status support ACA active 58 ACA active, faulted initiator 58 Busy 58 Check , DC 23 sequencing 26 power distribution 3 power management 22 PowerChoice 22 PowerChoice reports 23 PowerCycle 39 prefetch Manual, Rev. D 67
  • Seagate ST9300553SS | Savvio 15K.3 SAS Product Manual - Page 76
    self-encrypting drives 38 Self-Monitoring Analysis and Reporting Technology 9, 17 Serial Attached SCSI (SAS) Interface Manual 2 shielding management response codes 49 Function complete 00 49 Function not supported 05 49 Function reject 04 49 task set full status 58 TCG 38 technical support services
  • Seagate ST9300553SS | Savvio 15K.3 SAS Product Manual - Page 77
    W warranty 21 WriteLockEnabled 39 Z zero latency read 58 zone bit recording (ZBR) 8 Savvio 15K.3 SAS Product Manual, Rev. D 69
  • Seagate ST9300553SS | Savvio 15K.3 SAS Product Manual - Page 78
    70 Savvio 15K.3 SAS Product Manual, Rev. D
  • Seagate ST9300553SS | Savvio 15K.3 SAS Product Manual - Page 79
  • Seagate ST9300553SS | Savvio 15K.3 SAS Product Manual - Page 80
    Boulevard, Cupertino, California 95014, United States, 408-658-1000 ASIA/PACIFIC Seagate Singapore International Headquarters Pte. Ltd. 7000 Ang Mo Kio Avenue 5, Singapore 569877, 65-6485-3888 EUROPE, MIDDLE EAST AND AFRICA Seagate Technology SAS 16-18 rue du Dôme, 92100 Boulogne-Billancourt, France
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
Product Manual
Savvio
®
15K.3 SAS
100629381
Rev. D
January 2012
Standard Models
ST9300653SS
ST9146853SS
Self-Encrypting Drive Models
ST9300553SS
ST9146753SS
SED FIPS140-2 Models
ST9300453SS
ST9146653SS