Seagate ST9600204FC Savvio 10K.1 FC Product Manual

Seagate ST9600204FC Manual

Get Seagate ST9600204FC PDF manuals and user guides View all Seagate ST9600204FC manuals
Add to My Manuals
Save this manual to your list of manuals

Seagate ST9600204FC manual content summary:

  • Seagate ST9600204FC | Savvio 10K.1 FC Product Manual - Page 1
    Product Manual Savvio FC ST973401FC ST936701FC 100293077 Rev. D August 2007
  • Seagate ST9600204FC | Savvio 10K.1 FC Product Manual - Page 2
    trademarks are the property of their respective owners. One gigabyte, or GB, equals one billion bytes when referring to hard drive capacity. Accessible capacity may vary depending on operating environment and formatting. Quantitative usage examples for various applications are for illustrative
  • Seagate ST9600204FC | Savvio 10K.1 FC Product Manual - Page 3
    Cache operation 13 4.5.1 Caching write data 14 4.5.2 Prefetch operation 14 4.5.3 service 18 5.2.1 Mean time between failures (MTBF 18 5.2.2 Preventive maintenance 18 5.2.3 Hot plugging the drive 18 5.2.4 S.M.A.R.T 19 5.2.5 Thermal monitor 20 5.2.6 Drive FC Product Manual, Rev. D i
  • Seagate ST9600204FC | Savvio 10K.1 FC Product Manual - Page 4
    Loop options 49 9.2 Dual port support 49 9.3 SCSI commands supported 50 9.3.1 Inquiry data 55 9.3.2 Mode Sense data 55 9.4 Miscellaneous operating features and output 68 9.6.3 Differential PECL input 68 10.0 Seagate Technology support services 69 ii Savvio FC Product Manual, Rev. D
  • Seagate ST9600204FC | Savvio 10K.1 FC Product Manual - Page 5
    Savvio family disc drive 1 Typical ST973401FC drive +12V current profile 27 Typical ST973401FC drive +5V current profile 28 Typical ST936701FC drive +12V current profile 28 Typical ST936701FC drive +5V current profile diagram 68 Receive eye diagram 68 Savvio FC Product Manual, Rev. D iii
  • Seagate ST9600204FC | Savvio 10K.1 FC Product Manual - Page 6
  • Seagate ST9600204FC | Savvio 10K.1 FC Product Manual - Page 7
    Technology® LLC, Savvio® FC (Fibre Channel) disc drives. Savvio drives support the Fibre Channel Arbitrated Loop and SCSI Fibre Channel Protocol specifications to the extent described in this manual. The Fibre Channel Interface Manual (part number 77767496) describes the general Fibre Channel
  • Seagate ST9600204FC | Savvio 10K.1 FC Product Manual - Page 8
    2 Savvio FC Product Manual, Rev. D
  • Seagate ST9600204FC | Savvio 10K.1 FC Product Manual - Page 9
    within their systems to perform those tests required and design their system to ensure that equipment operating in the same system as the drive or external to the system does not adversely affect the performance of the drive. See Table 2, DC power requirements. Savvio FC Product Manual, Rev. D 3
  • Seagate ST9600204FC | Savvio 10K.1 FC Product Manual - Page 10
    . The selected system represents the most popular characteristics for test platforms. The system configurations include: • Typical current use microprocessor • 3.5-inch floppy disc drive • Keyboard • Monitor/display • Printer • External modem • Mouse Although the test system with this Seagate model
  • Seagate ST9600204FC | Savvio 10K.1 FC Product Manual - Page 11
    Guide Seagate part number: 100293078 Fibre Channel Interface Manual Connector with Parallel Selection Specification for 40-pin SCA-2 Connector with Bidirectional Enclosure Services Interface ANSI SCSI-3) Architecture Model NCITS 305-199X (SCSI-3) Enclosure Services Specification for Acoustic
  • Seagate ST9600204FC | Savvio 10K.1 FC Product Manual - Page 12
    6 Savvio FC Product Manual, Rev. D
  • Seagate ST9600204FC | Savvio 10K.1 FC Product Manual - Page 13
    public attachment • Differential copper FC drivers and receivers • Downloadable firmware using the FC-AL interface • Supports SCSI enclosure services via interface connector • 128-deep task set (queue) • Supports up to 32 initiators • Drive selection ID and configuration options are set on the FC-AL
  • Seagate ST9600204FC | Savvio 10K.1 FC Product Manual - Page 14
    • Selectable frame • 8,192 Kbyte data buffer (see Section Data Integrity Check • Power Save 3.2 Media description The media used on the drive data transfers per port • 10K-RPM spindle; average latency = 3.0 msec • Command queuing of up to 128 commands • Background processing of queue • Supports
  • Seagate ST9600204FC | Savvio 10K.1 FC Product Manual - Page 15
    and forward compatibility takes precedence. 3.5.1 Programmable drive capacity Using the Mode Select command, the drive can change its capacity to something less than maximum. See the Mode Select (6) parameter list table in the Fibre Channel Interface Manual, part number 7767496. Refer to the
  • Seagate ST9600204FC | Savvio 10K.1 FC Product Manual - Page 16
    unit distribution should specify this option. • The Savvio FC Installation Guide, part number 100293078, is usually included with each standard OEM drive shipped, but extra copies may be ordered. • The Safety FC ports and DC power. • Single-unit shipping pack. 10 Savvio FC Product Manual, Rev. D
  • Seagate ST9600204FC | Savvio 10K.1 FC Product Manual - Page 17
    conditions of temperature, voltage, and horizontal orientation as measured on a representative sample of drives. 4. Access time = controller overhead + average seek time and applies to all data transfer commands. Access to data = access time + latency time. Savvio FC Product Manual, Rev. D 11
  • Seagate ST9600204FC | Savvio 10K.1 FC Product Manual - Page 18
    port (dual port = 400 Mbytes/sec*) Logical block sizes Default is 512-byte data blocks Variable 512 to 704 bytes per sector in even number of bytes per sector. Interface Manual less than 3 seconds after DC power has been applied. After the Motor Start command has been received, the drive becomes
  • Seagate ST9600204FC | Savvio 10K.1 FC Product Manual - Page 19
    drive family are given in Table 17. 4.5 Cache operation Note. Refer to the Fibre Channel Interface Manual drive crosses a cylinder boundary to fetch data only if the Discontinuity (DISC) bit is set to 1 in bit 4 of byte 2 of the Mode Select -selectable configurations. The drive supports operation
  • Seagate ST9600204FC | Savvio 10K.1 FC Product Manual - Page 20
    The new data is cached for subsequent Read commands. If the number of write data logical blocks settings for the drive. 4.5.2 Prefetch operation If the Prefetch feature is enabled, data data in the buffer is a prefetch hit, not a cache operation hit. To enable Prefetch, use Mode Select page
  • Seagate ST9600204FC | Savvio 10K.1 FC Product Manual - Page 21
    to "look ahead" to the next contiguous segments of sequential data is a good thing. The Performance Mode (PM) bit controls the way the drive switches the cache buffer into different modes of segmentation. In 1Ah) in the Fibre Channel Interface Product Manual, part number 77767496. Savvio FC Product
  • Seagate ST9600204FC | Savvio 10K.1 FC Product Manual - Page 22
    16 Savvio FC Product Manual, Rev. D
  • Seagate ST9600204FC | Savvio 10K.1 FC Product Manual - Page 23
    Rates1 Recovered Data Unrecovered Data Miscorrected Data Less than 10 errors in 108 seeks Less than 10 errors in 1012 bits transferred (OEM default settings) Less than 1 sector in 1015 bits transferred Less than 1 sector in 1021 bits transferred Interface error rate MTBF Service Life Preventive
  • Seagate ST9600204FC | Savvio 10K.1 FC Product Manual - Page 24
    disc drive times the total number of disc drives in service. Each disc drive must have accumulated at least nine months of operation. Data is calculated on a rolling average base for a minimum period of six months. MTBF is initiated based on the type of error. 18 Savvio FC Product Manual, Rev. D
  • Seagate ST9600204FC | Savvio 10K.1 FC Product Manual - Page 25
    port bypass circuit (external to the drive), defaults to the data before an actual failure occurs. Note. The drive's firmware monitors specific attributes for degradation over time but can't predict instantaneous drive failures. Each monitored attribute has been selected to monitor a specific set
  • Seagate ST9600204FC | Savvio 10K.1 FC Product Manual - Page 26
    page (1Ch). Subject to the reporting method, the firmware will issue to the host an 01-5D00 sense data frame on the drive which exceeds the threatening temperature value. A temperature sensor monitors the drive temperature and issues a warning over the interface when the temperature exceeds a set
  • Seagate ST9600204FC | Savvio 10K.1 FC Product Manual - Page 27
    set at 68°C which is the maximum temperature limit according to the drive specification. The second trip point is user-selectable using the Log Select drive fails the test, remove it from service and return it to Seagate for service. 5.2.6.1 DST failure definition The drive data. Manual, Rev. D 21
  • Seagate ST9600204FC | Savvio 10K.1 FC Product Manual - Page 28
    001b) The purpose of the short test is to provide a time-limited test that tests as much of the drive as possible within 120 seconds. The short test does not scan the entire media surface, but does some fundamental test is reported through the Control Mode page. 22 Savvio FC Product Manual, Rev. D
  • Seagate ST9600204FC | Savvio 10K.1 FC Product Manual - Page 29
    . Existing data will be moved to make room for the new parameter block. The drive reports 20 set to the same value as sent in the DST command 2. The Self-Test Results Value field is set to Fh 3. The drive particular drive can be determined by calling Seagate Customer Service at 1- Manual, Rev. D 23
  • Seagate ST9600204FC | Savvio 10K.1 FC Product Manual - Page 30
    and return information Seagate customer service centers are the only facilities authorized to service Seagate drives. Seagate does not sanction any third-party repair facilities. Any unauthorized repair or tampering with the factory seal voids the warranty. 24 Savvio FC Product Manual, Rev. D
  • Seagate ST9600204FC | Savvio 10K.1 FC Product Manual - Page 31
    DC power requirements The voltage and current requirements for a single drive are shown below. Values indicated apply at the drive connector. Table 2: DC power requirements for ST973401FC ST973401FC (at 0.82 0.43 Maximum (peak) DC 3s 1.06 1.58 1.14 1.60 Savvio FC Product Manual, Rev. D 25
  • Seagate ST9600204FC | Savvio 10K.1 FC Product Manual - Page 32
    but must return to ±5% before reaching 10,000 RPM. The ±5% must be maintained after the drive signifies that its power-up sequence has been completed and that the drive is able to accept selection by the host initiator. [3] See +12V current profile in Figure 2. [4] This condition occurs when the
  • Seagate ST9600204FC | Savvio 10K.1 FC Product Manual - Page 33
    current profiles for the ST973401FC and ST936701FC models are shown below in the following figures. T0 Power is applied to the drive. T1 Controller self-tests are performed. maximum current requirements. Figure 2. Typical ST973401FC drive +12V current profile Savvio FC Product Manual, Rev. D 27
  • Seagate ST9600204FC | Savvio 10K.1 FC Product Manual - Page 34
    Figure 3. Typical ST973401FC drive +5V current profile Figure 4. Typical ST936701FC drive +12V current profile 28 Savvio FC Product Manual, Rev. D
  • Seagate ST9600204FC | Savvio 10K.1 FC Product Manual - Page 35
    Figure 5. Typical ST936701FC drive +5V current profile Savvio FC Product Manual, Rev. D 29
  • Seagate ST9600204FC | Savvio 10K.1 FC Product Manual - Page 36
    operations, refer to the following I/O rate curve (see Figure 6). Locate the typical I/O rate for a drive in your system on the horizontal axis and read the corresponding +5 volt current, +12 volt current, power vs. input/output operations per second at 2 Gbit 30 Savvio FC Product Manual, Rev. D
  • Seagate ST9600204FC | Savvio 10K.1 FC Product Manual - Page 37
    operations, refer to the following I/O rate curve (see Figure 6). Locate the typical I/O rate for a drive in your system on the horizontal axis and read the corresponding +5 volt current, +12 volt current, power vs. input/output operations per second at 2 Gbit Savvio FC Product Manual, Rev. D 31
  • Seagate ST9600204FC | Savvio 10K.1 FC Product Manual - Page 38
    outside these limits may degrade MTBF. Provided the HDA case temperatures limits are met, the drive meets all specifications over a 41°F to 131°F (5°C to 55°C) drive ambient temperature range with a a. Operating -1,000 to +10,000 feet (-305 to +3,048 meters) 32 Savvio FC Product Manual, Rev. D
  • Seagate ST9600204FC | Savvio 10K.1 FC Product Manual - Page 39
    shock shall apply to all conditions of handling and transportation. This includes both isolated drives and integrated drives. The drive subjected to nonrepetitive shock not exceeding 75 Gs at a maximum duration of 11 in (1219 mm) 42 in (1067 mm) 36 in (914 mm) Savvio FC Product Manual, Rev. D 33
  • Seagate ST9600204FC | Savvio 10K.1 FC Product Manual - Page 40
    Drives packaged in single or multipacks with a gross weight of 20 pounds (8.95 kg) or less by Seagate for general freight shipment a drop test from 48 inches (1,070 mm) against a concrete floor or equivalent. Z Y X X Z Y Figure 11. Recommended mounting 34 Savvio FC Product Manual, Rev. D
  • Seagate ST9600204FC | Savvio 10K.1 FC Product Manual - Page 41
    shall apply to all conditions of handling and transportation. This includes both isolated drives and integrated drives. The drive shall not incur physical damage or degraded performance as a result of continuous near circuitry with sulfide-free alternatives. Savvio FC Product Manual, Rev. D 35
  • Seagate ST9600204FC | Savvio 10K.1 FC Product Manual - Page 42
    3.5 bels typical when measured to ISO 7779 specification. There will not be any discrete tones more than 10 dB above the masking noise on typical drives when measured according to Seagate specification 30553-001. There will not be any tones more than 24 dB above the masking noise on any
  • Seagate ST9600204FC | Savvio 10K.1 FC Product Manual - Page 43
    Refer to Figure 12 for detailed mounting configuration dimensions. See Section 8.3, "Drive mounting." Height: Width: Depth: Weight: 0.583 in 2.76 in Figure 12. Mounting configuration dimensions (inches) Savvio FC Product Manual, Rev. D V AB Z AA P 4x M3 x 0.5-6H .120 MIN 0K Z X Y 2x T 2x S 2x R
  • Seagate ST9600204FC | Savvio 10K.1 FC Product Manual - Page 44
    38 Savvio FC Product Manual, Rev. D
  • Seagate ST9600204FC | Savvio 10K.1 FC Product Manual - Page 45
    data. The error recovery procedures used depend on the options previously set in the Error Recovery Parameters mode page. Error recovery and defect management may involve using several SCSI commands described in the Fibre Channel Interface Manual. The drive implements selectable drive firmware error
  • Seagate ST9600204FC | Savvio 10K.1 FC Product Manual - Page 46
    ARRE or AWRE bits are one. The drive will still perform data recovery actions within the limits defined by RC bit = 0, the read retry count set to 4, and the recovery time limit set to 450. A 4-block read command can given in the Fibre Channel Interface Manual. The FCP Response returns information to
  • Seagate ST9600204FC | Savvio 10K.1 FC Product Manual - Page 47
    drive ID and all option configurations for devices on the loop. If multiple devices are on the same FC-AL and physical addresses are used, set the device selection IDs (SEL IDs) on the backpanel so that no two devices have the same selection ID. This is called the hard assigned arbitrated loop
  • Seagate ST9600204FC | Savvio 10K.1 FC Product Manual - Page 48
    Drive mounting Use M3 x .5 metric screws to mount the drive using either side, bottom, or end mounting holes. Select the drive in any kind of adapter frame, verify that the drive drive and cannot be separated by the user. The equipment in which the drive method of mounting the drive in the host
  • Seagate ST9600204FC | Savvio 10K.1 FC Product Manual - Page 49
    Channel Interface Manual (part number 77767496). 9.1 FC-AL features This section lists the Fibre Channel-specific features supported by Savvio drives. 9.1.1 Fibre Channel link service frames Table 5 lists the link services supported by Savvio drives. Table 5: Link services supported Type of
  • Seagate ST9600204FC | Savvio 10K.1 FC Product Manual - Page 50
    Task name Supported Terminate task No Clear ACA No Target reset Yes Clear task set Yes Abort task set Yes supported. Table 7: FC SCSI FCP response codes Function name Response code Function complete 00 Function not supported 04 Function reject 05 44 Savvio FC Product Manual
  • Seagate ST9600204FC | Savvio 10K.1 FC Product Manual - Page 51
    selects the common features requested by the initiator login. MSB Continuously increasing offset Must = 1 Random relative offset Not checked. Port Login Accept will return a 0-not supported. Valid version level x N_Port/F_Port Must = 0, N_Port Alternate credit model the drive. SO Service
  • Seagate ST9600204FC | Savvio 10K.1 FC Product Manual - Page 52
    factory set to 00 04 CF respectively (subject to change). FS Receive buffer field size. The drive 24-bit field is uniquely assigned to the drive. This same UI appears in the Port Channel Process Login Table 10 lists the process login payload data. Table 10: Process Login (PLRI) payload Bytes 0-
  • Seagate ST9600204FC | Savvio 10K.1 FC Product Manual - Page 53
    Accept Table 11 lists Savvio process login accept payload data. Table 11: Process Login Accept (ACC) payload 31 and 32) are currently factory set to 00 04 CF respectively (subject to change). UI Unique identifier. This 24-bit field is uniquely assigned to the drive. This same UI appears in the
  • Seagate ST9600204FC | Savvio 10K.1 FC Product Manual - Page 54
    selects the common features requested by the fabric login. MSB Continuously increasing offset x Random relative offset x Valid version level x N_Port/F_Port Must = 1, F_Port Alternate credit model NN Node Name. The drive does not check or save the node name. SO Service Options-Class 3 only.
  • Seagate ST9600204FC | Savvio 10K.1 FC Product Manual - Page 55
    A and Port B may be connected in any order or combination. • If both ports are connected on independent loops and hard addressing is used, the drive interface address is selected through the interface connector, both ports will seek the same loop address. If no conflict, both ports will have the
  • Seagate ST9600204FC | Savvio 10K.1 FC Product Manual - Page 56
    Y Vital product data page (00h) Y Unit serial number page (80h) Y Implemented operating def. page (81h) Y Device Identification page (83h) Y Firmware numbers page (C0h) Y Date code page (C1h) Y Jumper settings page (C2h) Y Device Behavior page (C3h) 15h Y Mode select (same pages
  • Seagate ST9600204FC | Savvio 10K.1 FC Product Manual - Page 57
    code Supported [4] Command name Y Disconnect/reconnect control (page 02h) Y Format page (03h) Y Rigid disc drive geometry Supported diagnostics pages Y Translate page Y Enclosure services page 1Dh Y Send diagnostics page Y Supported address Savvio FC Product Manual, Rev. D 51
  • Seagate ST9600204FC | Savvio 10K.1 FC Product Manual - Page 58
    Supported [4] Command name 2Fh Y Verify Y Disable page out Y Byte check N Relative address 30h N Search data high 31h N Search data equal 32h N Search data low 33h N Set Firmware download option [2] 3Ch Y Read buffer Y Read combined header and data mode (0) Y Read data
  • Seagate ST9600204FC | Savvio 10K.1 FC Product Manual - Page 59
    LBdata 42-4Bh N Not used 4Ch Y Log Select 4Dh Y Log Sense Y Support Log page (00h) Y Write Error Counter page ( write 51h N XP write 52h N XD read 53-54h N Not used 55h Y Mode Select (10) [3] 56h Y Reserved (10) Y 3rd party reserve N Extent reservation 57h Y
  • Seagate ST9600204FC | Savvio 10K.1 FC Product Manual - Page 60
    can result in firmware corruption. This usually makes the drive inoperable. [3] Reference Mode Sense command 1Ah for mode pages supported. [4] Y = Yes. Command is supported. N = No. Command is not supported. A = Support is available on special request. 54 Savvio FC Product Manual, Rev. D
  • Seagate ST9600204FC | Savvio 10K.1 FC Product Manual - Page 61
    model: ST936701FC 53 54 39 33 36 37 30 31 46 43 9.3.2 Mode Sense data The Mode Sense command provides a way for the drive to report its operating parameters to the initiator. The drive maintains four sets of mode parameters: 1. Default values Default values are hard-coded in the drive firmware
  • Seagate ST9600204FC | Savvio 10K.1 FC Product Manual - Page 62
    often several different versions of drive control firmware in the total population of drives in the field, the Mode Sense values given in the following tables may not exactly match those of some drives. The following tables list the values of the data bytes returned by the drive in response to the
  • Seagate ST9600204FC | Savvio 10K.1 FC Product Manual - Page 63
    Table 17: Mode Sense data default and changeable values for ST973401FC drives ST973401FC Bytes 00 01 02 03 04 05 06 07 08 09 10 11 12 13 14 f f f f f f f f f f f f f DEF CHG 80 06 00 00 0f 00 00 00 80 06 b7 40 0f 00 00 00 08 8b b9 97 00 00 02 00 Savvio FC Product
  • Seagate ST9600204FC | Savvio 10K.1 FC Product Manual - Page 64
    data default and changeable values for ST936701FC drives ae 00 10 00 00 00 00 08 04 45 dc cc 00 00 02 00 Mode sense pages data DEF CHG 81 0a c0 0b f f 00 00 00 05 00 f f f f 81 00 00 80 06 b7 40 0f 00 00 00 04 45 dc cb 00 00 02 00 58 Savvio FC Product
  • Seagate ST9600204FC | Savvio 10K.1 FC Product Manual - Page 65
    Table 20: Miscellaneous status Supported Status Y Good Y Check condition Y Condition met/good Y Busy Y Intermediate/good Y Intermediate/condition met/good Y Reservation conflict Y Task set full N ACA active N ACA active, faulted initiator Savvio FC Product Manual, Rev. D 59
  • Seagate ST9600204FC | Savvio 10K.1 FC Product Manual - Page 66
    These PBCs are located external to the FC-AL device. Figure 15 shows the relationship between the PBC and FC-AL device. Port Bypass Circuit N-1 From Previous Drive Port Bypass Circuit MUX To Next Drive Port Bypass Circuit N+1 Drive N-1 Select Serial Serial In Out Drive N Figure 15. Port
  • Seagate ST9600204FC | Savvio 10K.1 FC Product Manual - Page 67
    Channel drives use the FC-SCA connector for: • DC power • FC-AL interface • Drive select (device identification) • Option selection • Enclosure Services interface This 40-pin connector is designed to plug directly into a backpanel. External cables are not required. Savvio FC Product Manual, Rev
  • Seagate ST9600204FC | Savvio 10K.1 FC Product Manual - Page 68
    ground. [2] Pins 9, 10, 17, 18, and 39 are option select pins and are tied high by the drive circuitry. The preferred electrical connection at the backplane is either open or grounded (open for the '1' setting, grounded for the '0' setting). Alternatively, these pins may be driven by a 3.3V logic
  • Seagate ST9600204FC | Savvio 10K.1 FC Product Manual - Page 69
    . 9.5.6 Power Power is supplied through the FC-SCA with support for +5 volts and +12 volts. All of the voltage pins in the drive connector are the same length. Four 12 volt pins provide The LED and the current-limiting resistor are external to the drive. Savvio FC Product Manual, Rev. D 63
  • Seagate ST9600204FC | Savvio 10K.1 FC Product Manual - Page 70
    supply through an appropriate current limiting resistor. The LED and the current limiting resistor are external to the drive. 9.5.9 Enable port bypass signals The - Enable Bypass Port A (- EN BYP Port value of the numeric SEL ID of the drive from DC power on. 64 Savvio FC Product Manual, Rev. D
  • Seagate ST9600204FC | Savvio 10K.1 FC Product Manual - Page 71
    bits of enclosure status and a bidirectional mode. ESI support and the mode are determined by the drive using a discovery process. Refer to the Fibre Channel Interface Manual for a description of ESI operation. 9.5.11.1 Parallel Enclosure Services Interface (ESI) The parallel ESI line is an output
  • Seagate ST9600204FC | Savvio 10K.1 FC Product Manual - Page 72
    Arbitrated loop physical address (AL_PA) values AL_PA (hex) SEL ID (hex) Setting (dec) AL_PA (hex) SEL ID (hex) Setting (dec) EF 00 00 E8 01 01 A3 2B 43 9F 2C 44 65 66 67 68 69 6A 6B 6C 6D 6E 6F 70 71 72 73 74 75 76 Setting (dec) 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101
  • Seagate ST9600204FC | Savvio 10K.1 FC Product Manual - Page 73
    If the backpanel does not connect to these lines, the drive has 10K ohm pull up resistors that default the device control code to 7 (1.0625 GHz). Table lists the supported codes. Table 26: Device control code values 2 (pin < -1.6mA IOH < -500µA IOL < 1.6mA Savvio FC Product Manual, Rev. D 67
  • Seagate ST9600204FC | Savvio 10K.1 FC Product Manual - Page 74
    < 1300 mV Centered at 1.32V Figure 18 provides the data output valid eye diagram relative to the bit cell time. 941 19 provides the data valid eye diagram for typical and minimum requirements to recover data at the specified interface error rate. The inputs are AC coupled on the drive. 941 ps
  • Seagate ST9600204FC | Savvio 10K.1 FC Product Manual - Page 75
    contain product launch, EOL, pricing, promotions and other channel-related information. To learn more about the benefits or to register, go to spp.seagate.com, any time, from anywhere in the world. Seagate Service Centers Presales Support Our Presales Support staff can help you determine
  • Seagate ST9600204FC | Savvio 10K.1 FC Product Manual - Page 76
    issues. Resellers or end users of drive products should contact their place of purchase or Seagate warranty service for assistance. Have your serial number and model or part number available. Data Recovery Services Seagate offers data recovery services for all formats and all brands of
  • Seagate ST9600204FC | Savvio 10K.1 FC Product Manual - Page 77
    flow illustrated 42 Alternate credit model 45, 48 altitude 32 ambient service frames 43 Basic_Accept (BA_ACC) 43 Basic_Reject (BA_RJT) 43 Savvio FC Product Manual, Rev. D BB 45, 48 BB-Credit 45, 48 buffer data ACA function 44 clear task set function 44 commands supported 50 Common features 45, 48
  • Seagate ST9600204FC | Savvio 10K.1 FC Product Manual - Page 78
    drive 35 drive characteristics 11 drive ID 41 drive mounting 37, 42 drive orientation 41 drive select 61 drivers and receivers 7 dual port support Interface Manual 1, 3, 5 Fibre Channel Services 43 Field pointer bytes command 50 firmware 7 corruption 54 Firmware download option command 52 Firmware
  • Seagate ST9600204FC | Savvio 10K.1 FC Product Manual - Page 79
    45, 48 internal data rate 11 internal defects/errors 39 internal drive characteristics 11 J Jumper settings page command 50 jumpers 41 L latency average rotational 11, 12 LBdata 53 Link Service Reject (LS_RJT) 43 link services supported 43 Lock-unlock-cache command 52 Log select command 53 Log
  • Seagate ST9600204FC | Savvio 10K.1 FC Product Manual - Page 80
    59 Good 59 Intermediate/condition met/good 59 Intermediate/good 59 Reservation conflict 59 Task set full 59 miscorrected media data 17 Mode select (10) command 53 command 50 Mode sense (10) command 53 command 50 data, table 55, 57 monitoring state 19 motor start controls 64 option 12 mounting 42
  • Seagate ST9600204FC | Savvio 10K.1 FC Product Manual - Page 81
    command 53 resonance 33 return information 24 Rezero unit command 50 Rigid disc drive geometry page command 51 rotation speed 11 running disparity 18 S safety 3 SCA part numbers 61 SCSI interface commands supported 50 Search data equal command 52 high command 52 low command 52 Seek command 50 seek
  • Seagate ST9600204FC | Savvio 10K.1 FC Product Manual - Page 82
    supported 05 44 Function reject 04 44 task set full status 59 technical support services 68 transmitters 63 transporting the drive 23 TTL input characteristics 67 Unrecoverable Errors 17 unrecovered media data 17 V Valid version level header and data mode (0) 52 Write command 50 Write data mode (2)
  • Seagate ST9600204FC | Savvio 10K.1 FC Product Manual - Page 83
  • Seagate ST9600204FC | Savvio 10K.1 FC Product Manual - Page 84
    Seagate Technology LLC 920 Disc Drive, Scotts Valley, California 95066-4544, USA Publication Number: 100293077, Rev. D, Printed in USA
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
Product Manual
Savvio FC
100293077
Rev. D
August 2007
ST973401FC
ST936701FC