Seagate SV35 Series SV35 Series SATA Product Manual

Seagate SV35 Series Manual

Get Seagate SV35 Series PDF manuals and user guides View all Seagate SV35 Series manuals
Add to My Manuals
Save this manual to your list of manuals

Seagate SV35 Series manual content summary:

  • Seagate SV35 Series | SV35 Series SATA Product Manual - Page 1
    Product Manual SV35 Series SATA ST3500641SV ST3250824SV ST3160812SV 100415208 Rev. B August 2007
  • Seagate SV35 Series | SV35 Series SATA Product Manual - Page 2
    are registered trademarks of Seagate Technology LLC in the United States and/or other countries. SV35 Series, SeaTools and SeaTDD are either trademarks or registered trademarks of Seagate Technology LLC or Seagate reserves the right to change, without notice, product offerings or specifications.
  • Seagate SV35 Series | SV35 Series SATA Product Manual - Page 3
    ATA device plug connector pin definitions 28 4.3 Supported ATA commands 30 4.3.1 Identify Device command 33 4.3.2 Set Features command 37 4.3.3 S.M.A.R.T. commands 38 4.3.4 Streaming feature set support 39 5.0 Seagate Technology support services 49 SV35 Series SATA Product Manual, Rev. B i
  • Seagate SV35 Series | SV35 Series SATA Product Manual - Page 4
    ii SV35 Series SATA Product Manual, Rev. B
  • Seagate SV35 Series | SV35 Series SATA Product Manual - Page 5
    14 Breather filter hole location 24 Serial ATA jumper block and connectors 25 Attaching SATA cabling 25 Mounting dimensions-top, side and end view 26 SV35 Series SATA Product Manual, Rev. B iii
  • Seagate SV35 Series | SV35 Series SATA Product Manual - Page 6
  • Seagate SV35 Series | SV35 Series SATA Product Manual - Page 7
    drives provide the following key features: • Specifically designed for surveilance DVRs. • Optimized power for surveillance systems--spinup limited to a maximum to 2.0 amps. • Seek profile optimized for surveillance performance and power consumption. • 7,200 RPM spindle speed. • 16 Mbyte buffer
  • Seagate SV35 Series | SV35 Series SATA Product Manual - Page 8
    to higher performance levels. In addition, Serial ATA makes the transition from parallel ATA easy by providing legacy software support. Serial ATA Speed Serialized AT Attachment" specification. The specification can be downloaded from www.serialata.org. 2 SV35 Series SATA Product Manual, Rev. B
  • Seagate SV35 Series | SV35 Series SATA Product Manual - Page 9
    under ambient conditions, at 25°C, and nominal power. For convenience, the phrases the drive and this drive are used throughout this manual to indicate the following models: ST3500641SV ST3250824SV ST3160812SV 2.1 Specification summaries The specifications listed in tables 1 and 2 are for quick
  • Seagate SV35 Series | SV35 Series SATA Product Manual - Page 10
    specification Formatted Gbytes (512 bytes/sector)* Guaranteed sectors Bytes per sector Default sectors per track Default read/write heads Default cylinders Recording density in BPI (kbits/inch max) Track density TPI (ktracks/inch avg) Areal density (Gbits/inch2 avg) Spindle speed (RPM) Internal
  • Seagate SV35 Series | SV35 Series SATA Product Manual - Page 11
    Vibration, nonoperating Drive acoustics, sound power Idle** (bels) Operational, DVR seeks (bels) Nonrecoverable read errors Annualized Failure Rate (AFR) Warranty Contact start-stop cycles (25°C, 50% relative humidity) Supports Hotplug operation per SATA II specification ST3500641SV -60.96 m to 12
  • Seagate SV35 Series | SV35 Series SATA Product Manual - Page 12
    specification Formatted Gbytes (512 bytes/sector)* Guaranteed sectors Bytes per sector Default sectors per track Default read/write heads Default cylinders Recording density in BPI (kbits/inch max) Track density TPI (ktracks/inch avg) Areal density (Gbits/inch2 avg) Spindle speed (RPM) Internal
  • Seagate SV35 Series | SV35 Series SATA Product Manual - Page 13
    , nonoperating Drive acoustics, sound power (bels) Idle** (bels) Operational, DVR seeks (bels) Nonrecoverable read errors Annualized Failure Rate (AFR) Warranty Contact start-stop cycles (25°C, 50% relative humidity) Supports Hotplug operation per SATA II specification ST3250824SV -60.96 m to
  • Seagate SV35 Series | SV35 Series SATA Product Manual - Page 14
    specification Formatted Gbytes (512 bytes/sector)* Guaranteed sectors Bytes per sector Default sectors per track Default read/write heads Default cylinders Recording density in BPI (kbits/inch max) Track density TPI (ktracks/inch avg) Areal density (Gbits/inch2 avg) Spindle speed (RPM) Internal
  • Seagate SV35 Series | SV35 Series SATA Product Manual - Page 15
    , nonoperating Drive acoustics, sound power (bels) Idle** (bels) Operational, DVR seeks (bels) Nonrecoverable read errors Annualized Failure Rate (AFR) Warranty Contact start-stop cycles (25°C, 50% relative humidity) Supports Hotplug operation per SATA II specification ST3160212SCE -60.96 m to
  • Seagate SV35 Series | SV35 Series SATA Product Manual - Page 16
    logical geometry Cylinders 16,383 Read/write heads 16 Sectors per track 63 LBA mode When addressing these drives in LBA mode, all blocks (sectors) are consecutively numbered from 0 to n-1, where n is the number of guaranteed sectors as defined above. 10 SV35 Series SATA Product Manual, Rev. B
  • Seagate SV35 Series | SV35 Series SATA Product Manual - Page 17
    ST3160812SV Areal density (Gbits/inch2 max) ST3500641SV and ST3250824SV ST3160812SV Spindle speed (RPM) (± 0.2%) Internal data-transfer rate (Mbits/sec max) ST3500641SV and ST3250824SV .2 65.0 76.6 83.0 300 16 Mbytes (16,385 kbytes) 8 Mbytes (8,192 kbytes) SV35 Series SATA Product Manual, Rev. B 11
  • Seagate SV35 Series | SV35 Series SATA Product Manual - Page 18
    taken with nominal power at 25°C ambient temperature. All times are measured using drive diagnostics. The specifications in the table benchmark tests that include command overhead or measure logical seeks may produce results that vary from these specifications. 12 SV35 Series SATA Product Manual
  • Seagate SV35 Series | SV35 Series SATA Product Manual - Page 19
    10 (max) 2.8 Power specifications The drive receives DC power (+5V and +12V) through a native SATA power connector. See Figure 5 on page 25. 2.8.1 Power consumption Power requirements for the drives and read/ write electronics are in power-down mode. SV35 Series SATA Product Manual, Rev. B 13
  • Seagate SV35 Series | SV35 Series SATA Product Manual - Page 20
    Table 4: DC power requirements Power dissipation (typical) Example: ST3500641SV Spinup Idle Operating (DVR Storage Profile) Seeking Standby Sleep Average (watts, 25° C) - 6.9 8.44 12.60 profile Figure 2 Typical 12V startup and operation current profile 14 SV35 Series SATA Product Manual, Rev. B
  • Seagate SV35 Series | SV35 Series SATA Product Manual - Page 21
    volt line or an equivalent 15-ohm resistive load on the +5 volt line. • Using 12-volt power, the drive is expected to operate with a maximum of 120 mV peak-to-peak square-wave injected all current translation parameters intact. • Idle and Standby timers SV35 Series SATA Product Manual, Rev. B 15
  • Seagate SV35 Series | SV35 Series SATA Product Manual - Page 22
    Each time the drive performs an Active function (read, to Active mode when disc access is necessary. 2.9 Environmental specifications 2.9.1 Ambient temperature Ambient temperature is defined as the temperature 96 m to 12,192 m (-200 ft. to 40,000+ ft.) 16 SV35 Series SATA Product Manual, Rev. B
  • Seagate SV35 Series | SV35 Series SATA Product Manual - Page 23
    specifications assume that the drive is mounted securely with the input shock applied at the drive mounting screws. Shock may be applied in the X, Y or Z axis. 2.9.5.1 Operating shock These drives comply with the performance performance specifications assume the performance standards performance
  • Seagate SV35 Series | SV35 Series SATA Product Manual - Page 24
    acoustics, sound power Idle Operational, DVR (Digital Video Recorder) seeks 2.46 bels (typ) 2.65 bels (max) 2.8 bels (typ) 2.9 bels (max) 2.11 Electromagnetic immunity When properly installed in a representative host system, the drive operates without errors or degradation in performance when
  • Seagate SV35 Series | SV35 Series SATA Product Manual - Page 25
    1 per 1014 bits read, max
  • Seagate SV35 Series | SV35 Series SATA Product Manual - Page 26
    tested this device in enclosures as described above to ensure that the total assembly (enclosure, disc drive, motherboard, power strict accordance with the manufacturer's instructions, may cause interference to radio and Resolve Radio-Television Interference Problems. This booklet is available from
  • Seagate SV35 Series | SV35 Series SATA Product Manual - Page 27
    substances are not utilized in our manufacturing operations, labora-tory analytical validation testing, and an internal auditing process to ensure that all standard operating extended by replacing materials near circuitry with sulfide-free alternatives. SV35 Series SATA Product Manual, Rev. B 21
  • Seagate SV35 Series | SV35 Series SATA Product Manual - Page 28
    22 SV35 Series SATA Product Manual, Rev. B
  • Seagate SV35 Series | SV35 Series SATA Product Manual - Page 29
    mounting the drive This section contains the specifications and instructions for configuring and mounting the drive. warranty. Some factory-installed labels contain information needed to service the drive. Other labels are used to seal out dirt and contamination. SV35 Series SATA Product Manual
  • Seagate SV35 Series | SV35 Series SATA Product Manual - Page 30
    this hole is covered, sealed, or penetrated by any object, drive reliability may be compromised and could lead to permanent damage--doing so voids the warranty. 24 SV35 Series SATA Product Manual, Rev. B
  • Seagate SV35 Series | SV35 Series SATA Product Manual - Page 31
    pairs, plus three ground connections. The cable size may be 30 to 26 AWG with a Power connector Signal cable Power cable Figure 5 Attaching SATA cabling Each cable is keyed to ensure correct orientation. SV35 Series SATA drives support latching SATA connectors. SV35 Series SATA Product Manual
  • Seagate SV35 Series | SV35 Series SATA Product Manual - Page 32
    (3x both sides) 1.028 max [1] (26.111 max) Notes: Dimensions are shown in inches (mm). [1] Dimensions per SFF-8301 specification 2 x 1.625 (2 x 41.28) [1] 2 (2 x x 1.750 44.45) [1] Figure 6 4.000 (101.6) [1] Recommended case temperature measurement location Mounting dimensions-top, side and
  • Seagate SV35 Series | SV35 Series SATA Product Manual - Page 33
    Hot-Plug compatibility SV35 Series SATA drives incorporate connectors which enable you to hot plug these drives in accordance with the Serial ATA II: Extension to Serial ATA 1.0a specification. This specification can be downloaded from www.serialata.org. SV35 Series SATA Product Manual, Rev. B 27
  • Seagate SV35 Series | SV35 Series SATA Product Manual - Page 34
    Key and spacing separate signal and power segments P1 V33 P2 V33 P3 V33 P4 Ground 3.3V power 3.3V power 3.3V power, pre-charge, 2nd mate 1st P12 Ground 1st mate. P13 V12 P14 V12 P15 V12 12V power, pre-charge, 2nd mate 12V power 12V power Notes: 1. All pins are in a single row, with a
  • Seagate SV35 Series | SV35 Series SATA Product Manual - Page 35
    . • the signal pins and the rest of the power pins. 3. There are three power pins for each voltage. One pin from each voltage is used for pre-charge when installed in a blind-mate backplane configuration. 4. All used voltage pins (Vx) must be terminated. SV35 Series SATA Product Manual, Rev. B 29
  • Seagate SV35 Series | SV35 Series SATA Product Manual - Page 36
    AT Attachment specification. See "S.M.A.R.T. commands" on page 38.for details and subcommands used in the S.M.A.R.T. implementation. Table 7: Supported ATA commands Command name Check Power Mode Device 95H or E1H 91H E4H C8H 25H C9H 2FH C4H 29H F8H 27H 30 SV35 Series SATA Product Manual, Rev. B
  • Seagate SV35 Series | SV35 Series SATA Product Manual - Page 37
    Sectors 20H Read Sectors Extended 24H Read Sectors Without Retries 21H Read Verify Sectors 40H Read Verify Sectors Extended 42H Read Verify Sectors B0H / D4H S.M.A.R.T. Read Attribute Thresholds B0H / D1H S.M.A.R.T. Read Data B0H / D0H SV35 Series SATA Product Manual, Rev. B 31
  • Seagate SV35 Series | SV35 Series SATA Product Manual - Page 38
    Write DMA FUA Extended Write DMA Without Retries Write Log Extended Write Multiple Write Multiple Extended Write Multiple FUA Extended Write Sectors Write Sectors Without Retries Write Sectors Extended Command code (in hex) B0H / D5H B0H / DAH B0H / D3H B0H / D6H 96H or E2H 94H or E0H E8H CAH
  • Seagate SV35 Series | SV35 Series SATA Product Manual - Page 39
    Maximum sectors per interrupt on Read multiple and Write 8010H multiple (16) 48 Reserved 49 Standard Standby timer, IORDY supported and may be disabled 50 ATA-reserved 51 PIO data-transfer cycle timing mode 52 Retired 0000H 2F00H 0000H 0200H 0200H SV35 Series SATA Product Manual, Rev
  • Seagate SV35 Series | SV35 Series SATA Product Manual - Page 40
    of current logical sectors per logical track Current capacity in sectors Number of sectors transferred during a Read supported xxxxH Serial ATA features enabled xxxxH Major version number 003EH Minor version number 0000H Command sets supported 364BH 34 SV35 Series SATA Product Manual
  • Seagate SV35 Series | SV35 Series SATA Product Manual - Page 41
    Description (if bit is set to 1) Bit Word 63 0 Multiword DMA mode 0 is supported. 1 Multiword DMA mode 1 is supported. 2 Multiword DMA mode 2 is supported. 8 Multiword DMA mode 0 is currently active. 9 Multiword DMA mode 1 is currently active. SV35 Series SATA Product Manual, Rev. B 35
  • Seagate SV35 Series | SV35 Series SATA Product Manual - Page 42
    supported. 1 Ultra DMA mode 1 is supported. 2 Ultra DMA mode 2 is supported. 3 Ultra DMA mode 3 is supported. 4 Ultra DMA mode 4 is supported. 5 Ultra DMA mode 5 is supported. 6 Ultra DMA mode 6 is supported DMA mode 6 is currently active. 36 SV35 Series SATA Product Manual, Rev. B
  • Seagate SV35 Series | SV35 Series SATA Product Manual - Page 43
    not represent a feature that the drive supports, the command is aborted. Power-on default has the read look-ahead and default). 03H Set transfer mode (based on value in Sector Count register). Sector Count register values: 00H Set PIO mode to default ( SV35 Series SATA Product Manual, Rev. B 37
  • Seagate SV35 Series | SV35 Series SATA Product Manual - Page 44
    supports Sector D8H S.M.A.R.T. Enable Operations D9H S.M.A.R.T. Disable Operations DAH S.M.A.R.T. Return Status Note. If an appropriate code is not written to the Features Register, the command is aborted and 0x04 (abort) is written to the Error register. 38 SV35 Series SATA Product Manual
  • Seagate SV35 Series | SV35 Series SATA Product Manual - Page 45
    to 0, the bit will clear. Word 95 (Stream Minimum Request Size) World 95 contains the number of sectors that provide optimum performance in a streaming environment. This number shall be a power of two, with a minimum of eight sectors (4096 bytes). The starting LBA value for each streaming command
  • Seagate SV35 Series | SV35 Series SATA Product Manual - Page 46
    there may be an impact on performance due to the unknown time required be a multiple of the minimum number of sectors per transfer, as should the starting LBA of the device in an error condition is vendor specific. Write Continuous bit If the Write Continuous SV35 Series SATA Product Manual, Rev. B
  • Seagate SV35 Series | SV35 Series SATA Product Manual - Page 47
    for command completion. SECTOR COUNT REGISTER FIELD DESCRIPTIONS Current The size of an Allocation Unit in sectors (bits 7:0). Previous The size of an Allocation Unit in sectors (bits 15:8) DEVICE REGISTER FIELD DESCRIPTIONS Dev The selected device. SV35 Series SATA Product Manual, Rev. B 41
  • Seagate SV35 Series | SV35 Series SATA Product Manual - Page 48
    65536 sectors as specified in the Sector Count register. A value of 0000h in the Sector Count register requests 65536 sectors. The to fulfill the host's requested transfer size. The implementation of the padding is vendor specific. If the drive is unable to SV35 Series SATA Product Manual, Rev. B
  • Seagate SV35 Series | SV35 Series SATA Product Manual - Page 49
    this Stream type, the result is vendor specific. The time is measured from the 5 4 3 2 1 0 Error ICRC UNC N/A IDNF N/A ABRT N/A CCTO Sector Count HOB = 0 Length of Stream Error (7:0) LBA Low HOB = 1 Length set to 1 if this command is not supported. ABRT may be set to 1 if the
  • Seagate SV35 Series | SV35 Series SATA Product Manual - Page 50
    address of the first sector in error, and the Sector Count registers shall contain the number of consecutive sectors that may contain errors. DRQ 0 This bit shall be set to 0. ERR 1 This bit shall be set to 1 if an Error register bit is set to 1. 44 SV35 Series SATA Product Manual, Rev. B
  • Seagate SV35 Series | SV35 Series SATA Product Manual - Page 51
    to specify to the device that additional actions need to be performed prior to the completion of the command if the required bits r 2 1 0 Ignored Sector Count Previous Current Command Completion Time Limit (7:0) Sector count Previous LBA Low, Mid SV35 Series SATA Product Manual, Rev. B 45
  • Seagate SV35 Series | SV35 Series SATA Product Manual - Page 52
    defined for this Stream ID, the result is vendor specific. The time is measured from the write of 7 6 5 4 3 2 1 0 Error ICRC N/A N/A IDNF N/A ABRT N/A CCTO Sector Count HOB = 0 Length of Stream Error (7:0) LBA Low HOB = 1 Length of Stream SV35 Series SATA Product Manual, Rev. B
  • Seagate SV35 Series | SV35 Series SATA Product Manual - Page 53
    be set to 1 if this command is not supported. ABRT may be set to 1 if the device Sector Number registers shall be the address of the first sector in error, and the Sector Count registers shall contain the number of consecutive sectors service a command. SV35 Series SATA Product Manual, Rev. B 47
  • Seagate SV35 Series | SV35 Series SATA Product Manual - Page 54
    caching is allowed, the actuator could be busy servicing a cached write at virtually any time. the host's time limit allows, the drive will perform internal defect management on any defective sectors encountered. If the drive runs out of time during . 48 SV35 Series SATA Product Manual, Rev. B
  • Seagate SV35 Series | SV35 Series SATA Product Manual - Page 55
    by email for your questions. Presales Support: [email protected] Technical Support: [email protected] Warranty Support: http://www.seagate.com/support/service/index.html mySeagate my.seagate.com is the industry's first Web portal designed specifically for OEMs and distributors. It provides
  • Seagate SV35 Series | SV35 Series SATA Product Manual - Page 56
    East and Africa, go to the "Contact Us" page on www.seagate.com. Asia/Pacific Support Services For an extensive list of telephone numbers to technical support, presales and warranty service in Asia/Pacific, go to the "Contact Us" page on www.seagate.com. 50 SV35 Series SATA Product Manual, Rev. B
  • Seagate SV35 Series | SV35 Series SATA Product Manual - Page 57
    ATA data-transfer modes supported 4, 6, 8 Australia 8, 11 buffer 4, 6, 8, 11 Bytes per sector 4, 6, 8, 10 C cables and connectors 25 Cache 19 certification 19 Check Power Mode 30 chemical 1 DC power 13 Default logical geometry 10 Default sectors per track 21 Environmental specifications 16 EPRML 11
  • Seagate SV35 Series | SV35 Series SATA Product Manual - Page 58
    vibration 17 P PCBA 21 Physical characteristics 12 point-to-point 2, 25 Power consumption 13 power consumption 13 Power dissipation 14 Power modes 15 Power specifications 13 Power-management modes 15 Power-on to Ready 13 Power-on to ready 4, 6, 8 precautions 23 printed circuit board 23 programmable
  • Seagate SV35 Series | SV35 Series SATA Product Manual - Page 59
    9, 19 Startup current 4, 6, 8 static-discharge 23 sulfide-free alternatives 21 support services 49 Surge immunity 18 T technical support services 49 temperature 4, 6, 8, 12, 16 Temperature gradient 4, 6, 8 temperature gradient 16 timer 15 timers 15 TMR 1 SV35 Series SATA Product Manual, Rev. B 53
  • Seagate SV35 Series | SV35 Series SATA Product Manual - Page 60
    FUA Extended 32 Write DMA Without Retries 32 Write Log Extended 32 Write Multiple 1, 32 Write Multiple Extended 32 Write Multiple FUA Extended 32 Write Sectors 32 Write Sectors Extended 32 Write Sectors Without Retries 32 54 SV35 Series SATA Product Manual, Rev. B
  • Seagate SV35 Series | SV35 Series SATA Product Manual - Page 61
  • Seagate SV35 Series | SV35 Series SATA Product Manual - Page 62
    Seagate Technology LLC 920 Disc Drive, Scotts Valley, California 95066-4544, USA Publication Number: 100415208, Rev. B, Printed in USA
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
Product Manual
SV35 Series SATA
100415208
Rev. B
August 2007
ST3500641SV
ST3250824SV
ST3160812SV