Seagate Savvio 10K Savvio 10K.1 SCSI Product Manual

Seagate Savvio 10K Manual

Get Seagate Savvio 10K PDF manuals and user guides View all Seagate Savvio 10K manuals
Add to My Manuals
Save this manual to your list of manuals

Seagate Savvio 10K manual content summary:

  • Seagate Savvio 10K | Savvio 10K.1 SCSI Product Manual - Page 1
    Product Manual Savvio SCSI ST973401LC ST936701LC 100293075 Rev. D August 2007
  • Seagate Savvio 10K | Savvio 10K.1 SCSI Product Manual - Page 2
    trademarks of Seagate Technology LLC or one of its affiliated companies in the United States and/or other countries. All other trademarks or registered trademarks are the property of their respective owners. One gigabyte, or GB, equals one billion bytes when referring to hard drive capacity
  • Seagate Savvio 10K | Savvio 10K.1 SCSI Product Manual - Page 3
    5.2.2 Preventive maintenance 19 5.2.3 Service life 19 5.2.4 Service philosophy 19 5.2.5 Service tools 19 5.2.6 Hot plugging Savvio SCSI disc drives 19 5.2.7 S.M.A.R.T 20 5.2.8 Thermal monitor 21 5.2.9 Drive Self Test (DST 22 5.2.10 Product warranty 24 Savvio SCSI Product Manual, Rev. D i
  • Seagate Savvio 10K | Savvio 10K.1 SCSI Product Manual - Page 4
    management 37 7.1 Drive internal defects 37 7.2 Drive error recovery procedures 37 7.3 SCSI systems errors 38 8.0 Installation 39 8.1 Drive orientation 39 8.2 Cooling 39 8.3 Drive 9.9 Disc drive SCSI timing 60 10.0 Seagate Technology support services 63 ii Savvio SCSI Product Manual, Rev.
  • Seagate Savvio 10K | Savvio 10K.1 SCSI Product Manual - Page 5
    Savvio SCSI family drive 1 Typical ST973401 drive +12 V current profile 27 Typical ST973401 drive +5 V current profile 27 Typical ST936701 drive +12 V current profile 28 Typical ST936701 drive +5 V current LVD alternative transmitter receiver circuits 59 Savvio SCSI Product Manual, Rev. D iii
  • Seagate Savvio 10K | Savvio 10K.1 SCSI Product Manual - Page 6
  • Seagate Savvio 10K | Savvio 10K.1 SCSI Product Manual - Page 7
    1.0 Scope This manual describes Seagate® SavvioTM disc drives. Savvio SCSI drives support the small computer system interface (SCSI) as described in the ANSI SCSI SPI-3 interface specifications to the extent described in this manual. The SCSI Interface Product Manual (part number 75789509) describes
  • Seagate Savvio 10K | Savvio 10K.1 SCSI Product Manual - Page 8
    2 Savvio SCSI Product Manual, Rev. D
  • Seagate Savvio 10K | Savvio 10K.1 SCSI Product Manual - Page 9
    of Section 8.3. 2.1 Standards The Savvio SCSI family complies with Seagate standards as noted in the appropriate sections of this Manual and the Seagate SCSI Interface Product Manual, part number 75789509. The Savvio SCSI disc drive is a UL recognized component per UL1950, CSA certified to CSA
  • Seagate Savvio 10K | Savvio 10K.1 SCSI Product Manual - Page 10
    disc drive • Keyboard • Monitor/display • Printer • External modem • Mouse Although the test system with this Seagate model Electromagnetic Compatibility (EMC) Framework requirements of Australia's Spectrum Management Agency (SMA). Korean MIC If this model has 4 Savvio SCSI Product Manual, Rev. D
  • Seagate Savvio 10K | Savvio 10K.1 SCSI Product Manual - Page 11
    2.3 Reference documents Savvio SCSI Installation Guide Seagate P/N 100293076 Safety and Regulatory Agency Specifications Seagate P/N 75789512 SCSI Interface Product Manual Seagate P/N 75789509 Applicable ANSI small computer system interface (SCSI) document numbers: T10/1143D T10/1416D T10/
  • Seagate Savvio 10K | Savvio 10K.1 SCSI Product Manual - Page 12
    6 Savvio SCSI Product Manual, Rev. D
  • Seagate Savvio 10K | Savvio 10K.1 SCSI Product Manual - Page 13
    of the Savvio SCSI family of drives, and the SCSI Interface Product Manual, part number 75789509, which describes the general interface characteristics of this and other families of Seagate SCSI drives. The drive's interface supports multiple initiators, disconnect/reconnect, self-configuring
  • Seagate Savvio 10K | Savvio 10K.1 SCSI Product Manual - Page 14
    Self diagnostics performed when power is applied to the drive • Zoned bit recording (ZBR) • Vertical, Power Save • Supports SCSI bus fairness 3.2 Media characteristics The media used on the drive has an aluminum of queue • Supports start and stop commands (spindle stops spinning) 8
  • Seagate Savvio 10K | Savvio 10K.1 SCSI Product Manual - Page 15
    Hex 88BB998 867E068 85E4254 8371800 83342E0 2. Seagate drives also may be used at the maximum Manual. Refer to the Parameter list block descriptor number of blocks field. A value of zero in the number of blocks field indicates that the drive drives are shipped with the Savvio SCSI Installation Guide
  • Seagate Savvio 10K | Savvio 10K.1 SCSI Product Manual - Page 16
    . • Single unit shipping pack. The drive is normally shipped in bulk packaging to Savvio SCSI Installation Guide, part number 100293076, is usually included with each standard OEM drive shipped, but 75789512, is usually included with each standard OEM drive shipped, but extra copies may be ordered.
  • Seagate Savvio 10K | Savvio 10K.1 SCSI Product Manual - Page 17
    . Refer to Section 9.9 and to the SCSI Interface Product Manual for additional timing details. 4.2.1 Access time [5] Including controller 0.95 8.70 9.10 Not including controller overhead (without disconnect) [1] [3] Drive level Read Write msec 4.50 4.90 0.45 0.75 8.50 8.90 4.2.2
  • Seagate Savvio 10K | Savvio 10K.1 SCSI Product Manual - Page 18
    a representative sample of drives. [3] Assumes no errors and no sector has been relocated. [4] Assumes system ability to support the rates listed and no Command Reference Manual less than 3 seconds after DC power has been applied. After the Motor Start Command has been received the drive becomes
  • Seagate Savvio 10K | Savvio 10K.1 SCSI Product Manual - Page 19
    supports a maximum of 64 cache segments. The drive maintains a table of logical block disc medium addresses of the data stored in each segment of the buffer. If cache operation is enabled (RCD bit = 0 in Mode Page 08h, byte 2, bit 0. See SCSI Command Reference Manual), data requested by the host
  • Seagate Savvio 10K | Savvio 10K.1 SCSI Product Manual - Page 20
    returned, a deferred error will be generated. The Synchronize Cache command may be used to force the drive to write all cached write data to the medium. Upon completion of a Synchronize Cache command, all data segments of data. In a server environment, you 14 Savvio SCSI Product Manual, Rev. D
  • Seagate Savvio 10K | Savvio 10K.1 SCSI Product Manual - Page 21
    (PM) bit controls the way the drive switches the cache buffer into different modes of segmentation. In "server mode" (PM bit = 0), the drive can dynamically change the number of cache buffer Mode Sense command (1Ah) in the SCSI Interface Product Manual, part number 75789509. Savvio SCSI Product
  • Seagate Savvio 10K | Savvio 10K.1 SCSI Product Manual - Page 22
    16 Savvio SCSI Product Manual, Rev. D
  • Seagate Savvio 10K | Savvio 10K.1 SCSI Product Manual - Page 23
    drive mounting constraints (see Section 8.3). Seek Errors Read Error Rates [1] Recovered Data Unrecovered Data Miscorrected Data MTBF Service the following: • The drive is operated per this specification using DC power as defined in this manual (see Section 6.2). • The drive has been formatted with
  • Seagate Savvio 10K | Savvio 10K.1 SCSI Product Manual - Page 24
    calculations. Refer to the SCSI Interface Product Manual, part number 75789509, for Request Sense information. 5.2 Reliability and service You can enhance the reliability of Savvio SCSI disc drives by ensuring that the drive receives adequate cooling. Section 6 provides temperature measurements
  • Seagate Savvio 10K | Savvio 10K.1 SCSI Product Manual - Page 25
    drive HDA. In order to achieve the above service life, repairs must be performed only at a properly equipped and staffed service and repair facility. Troubleshooting , except on the device being changed Seagate Savvio SCSI disc drives support all four hot plugging cases. Provision Manual, Rev. D 19
  • Seagate Savvio 10K | Savvio 10K.1 SCSI Product Manual - Page 26
    removal are methods for insuring that this requirement is met. During drive insertion, care should be taken to avoid exceeding the limits stated in Section 6.4.4, "Shock and vibration" in this manual. 5.2.7 S.M.A.R.T. S.M.A.R.T. is an acronym for Self-Monitoring Analysis and Reporting Technology
  • Seagate Savvio 10K | Savvio 10K.1 SCSI Product Manual - Page 27
    the drive drives drive. 2. Signals the host if the temperature exceeds a user-specified value. 3. Saves a S.M.A.R.T. data frame on the drive which exceed the threatening temperature value. A temperature sensor monitors the drive standard. The drive temperature is reported drive threatening drive
  • Seagate Savvio 10K | Savvio 10K.1 SCSI Product Manual - Page 28
    performs various tests on the drive and scans every logical block address (LBA) of the drive. The short test is drive fails the test, remove it from service and return it to Seagate for service. 5.2.9.1 DST Failure Definition The drive drive. 5.2.9.2.1 State of the drive prior to testing The drive
  • Seagate Savvio 10K | Savvio 10K.1 SCSI Product Manual - Page 29
    in bytes 1, bits 5, 6, and 7. Refer to the Seagate SCSI Interface Product Manual, part number 75789509, for additional information about invoking DST. test is to provide a time-limited test that tests as much of the drive as possible within 120 seconds. The short test does not scan the entire
  • Seagate Savvio 10K | Savvio 10K.1 SCSI Product Manual - Page 30
    drive. The self-test results in the field. The drive will report the failure condition years, Seagate warrants that Seagate's designated facility in accordance with Seagate's warranty procedure. Seagate Seagate customer service centers are the only facilities authorized to service Seagate drives. Seagate
  • Seagate Savvio 10K | Savvio 10K.1 SCSI Product Manual - Page 31
    drive. 6.1 None. AC power requirements 6.2 DC power requirements The voltage and current requirements for a single drive are shown in the following table. Values indicated apply at the drive of drives drive signifies that its power-up sequence has been completed and that the drive drive
  • Seagate Savvio 10K | Savvio 10K.1 SCSI Product Manual - Page 32
    the drive heads are drives from a common supply, careful consideration for individual drive measurements and apply at the drive power connector. +5 V drive does not require power sequencing. The drive until the drive receives drive +12 V current profiles and figures 3 and 5 identify the drive drive is
  • Seagate Savvio 10K | Savvio 10K.1 SCSI Product Manual - Page 33
    Figure 2. Typical ST973401 drive +12 V current profile Figure 3. Typical ST973401 drive +5 V current profile Savvio SCSI Product Manual, Rev. D 27
  • Seagate Savvio 10K | Savvio 10K.1 SCSI Product Manual - Page 34
    Figure 4. Typical ST936701 drive +12 V current profile Figure 5. Typical ST936701 drive +5 V current profile 28 Savvio SCSI Product Manual, Rev. D
  • Seagate Savvio 10K | Savvio 10K.1 SCSI Product Manual - Page 35
    to the following two I/O rate curves (see Figures 6 and 7). Locate the typical I/O rate for a drive in your system on the horizontal axis and read the corresponding +5 volt current, +12 volt current, and power vs. input/output operations per second (LVD) Savvio SCSI Product Manual, Rev. D 29
  • Seagate Savvio 10K | Savvio 10K.1 SCSI Product Manual - Page 36
    to the following two I/O rate curves (see Figures 6 and 7). Locate the typical I/O rate for a drive in your system on the horizontal axis and read the corresponding +5 volt current, +12 volt current, and and power vs. input/output operations per second (LVD) 30 Savvio SCSI Product Manual, Rev. D
  • Seagate Savvio 10K | Savvio 10K.1 SCSI Product Manual - Page 37
    drives ability to meet specifications. The MTBF specification for the drive to drive ambient temperatures place the drive in its drive. The maximum allowable HDA case temperature is 60°C. Operation of the drive drive is packaged in the shipping container designed by Seagate for use with drive
  • Seagate Savvio 10K | Savvio 10K.1 SCSI Product Manual - Page 38
    drive chassis. If the drive drive movement. The limits of shock and vibration defined within this document are specified with the drive normal The drive, as ). The drive, as drives and integrated drives. The drive Z axis. The drive subjected to nonrepetitive Z axis. The drive subjected to nonrepetitive
  • Seagate Savvio 10K | Savvio 10K.1 SCSI Product Manual - Page 39
    height 60 in (1524 mm) 48 in (1219 mm) 42 in (1067 mm) 36 in (914 mm) Drives packaged in single or multipacks with a gross weight of 20 pounds (8.95 kg) or less by Seagate for general freight shipment shall withstand a drop test from 48 inches (1,070 mm) against a concrete floor or
  • Seagate Savvio 10K | Savvio 10K.1 SCSI Product Manual - Page 40
    a typical office environment with minimal environmental control. 6.4.6 Corrosive environment Seagate electronic drive components pass accelerated corrosion testing equivalent to 10 years exposure to materials near circuitry with sulfide-free alternatives. 34 Savvio SCSI Product Manual, Rev. D
  • Seagate Savvio 10K | Savvio 10K.1 SCSI Product Manual - Page 41
    on typical drives when measured according to Seagate specification 30553-001. There will not be any tones more than 24 dB above the masking noise on any drive mounting configuration dimensions. See Section 8.3, "Drive mounting." Height: Width: Depth: Weight:
  • Seagate Savvio 10K | Savvio 10K.1 SCSI Product Manual - Page 42
    . Mounting configuration dimensions 4x M3 x 0.5-6H .100 MIN 0K Z X Y 2x Q V AB Z AA P 4x M3 x 0.5-6H .120 MIN 0K Z X Y 2x T 2x S 2x R 36 Savvio SCSI Product Manual, Rev. D
  • Seagate Savvio 10K | Savvio 10K.1 SCSI Product Manual - Page 43
    management routines by the host (initiator). Defect and error management in the SCSI system involves the drive internal defect/error management Command Reference Manual, which describes the Mode Select/Mode Sense Error Recovery parameters. The error recovery scheme supported by the drive provides a
  • Seagate Savvio 10K | Savvio 10K.1 SCSI Product Manual - Page 44
    Results reports the results of diagnostic operations performed by the drive. Status returned by the drive to the Initiator is described in the SCSI Interface Product Manual. Status reporting plays a role in the SCSI systems error management and its use in that respect is described in sections
  • Seagate Savvio 10K | Savvio 10K.1 SCSI Product Manual - Page 45
    requirements, refer to Sections 9.8 and 9.8.1. • Installation instructions are provided by host system documentation or with any additionally purchased drive installation software. If necessary see Section 10.0 for Seagate support services telephone numbers. • Do not remove the manufacturer
  • Seagate Savvio 10K | Savvio 10K.1 SCSI Product Manual - Page 46
    Under unit 8.3 Drive mounting Use M3 x .5 metric screws to mount the drive using the side, the drive in any kind of adapter frame, verify that the drive can meet drive and cannot be separated by the user. The equipment in which the drive ) method of mounting the drive in the host equipment.
  • Seagate Savvio 10K | Savvio 10K.1 SCSI Product Manual - Page 47
    which this family of drives can properly operate. Seagate declares that the drives operate in accordance with the appropriate ANSI Standards referenced in various places herein, with exceptions as noted herein or in the Seagate SCSI Interface Product Manual. Savvio SCSI Product Manual, Rev. D 41
  • Seagate Savvio 10K | Savvio 10K.1 SCSI Product Manual - Page 48
    of the Savvio SCSI family drives. Table 12: SCSI messages supported by Savvio SCSI family drives Message name Abort Abort- 11h [1] Supported Y Y Y N Y Y N Y Y Y Y N Y Y Y Y Y N Y Y N Y Y Y N Y Y Y N N Y Notes. [1] Extended messages (see the SCSI Command Reference Manual). [2] Supports all options
  • Seagate Savvio 10K | Savvio 10K.1 SCSI Product Manual - Page 49
    in Ultra320 mode. Table 13: Commands supported by Savvio SCSI family drive Command name Change Definition Compare Copy Copy and Verify Format Unit [1] DPRY bit supported DCRT bit supported STPF bit supported IP bit supported DSP bit supported IMMED bit supported VS (vendor specific) Inquiry Date
  • Seagate Savvio 10K | Savvio 10K.1 SCSI Product Manual - Page 50
    Disc Drive Geometry supported FUA bit supported Read Long Reassign Blocks Receive Diagnostic Results Command code 15h 55h 1Ah 5Ah 34h 08h 3Ch 25h 37h B7h 28h 3Eh 07h 1Ch Supported N Y Y Y N Y Y Y Y Y Y [2] Y Y [2] Y Y Y Y Y Y N Y Y Y Y Y N Y N Y Y Y Y Y Y Y Y Y Y Y 44 Savvio SCSI Product Manual
  • Seagate Savvio 10K | Savvio 10K.1 SCSI Product Manual - Page 51
    (modes 5, 7, Ah and Bh supported) [3] Write Extended DPO bit FUA bit Command code 17h 57h A0h 03h 16h 56h 01h 31h 30h 32h 0Bh 2Bh 1Dh 33h 1Bh 35h 00h 2Fh 0Ah 2Eh 3Bh 2Ah Supported Y Y Y Y Y Y Y Y Y Y Y N Y Y N Y N N N Y Y Y Y Y N Y Y Y Y Y Y Y Y Y Y Y Y Y Savvio SCSI Product Manual, Rev. D 45
  • Seagate Savvio 10K | Savvio 10K.1 SCSI Product Manual - Page 52
    Write Same PBdata LBdata XDRead XDWrite XPWrite Command code 3Fh 41h 52h 50h 51h Supported Y Y N N N N N [1] The drive can format to any even number of bytes per sector from 512 to 528 result in firmware corruption. This usually makes the drive inoperable. 46 Savvio SCSI Product Manual, Rev. D
  • Seagate Savvio 10K | Savvio 10K.1 SCSI Product Manual - Page 53
    Product Manual, part number 75789509, Inquiry command section. Table 14: Savvio SCSI family drive Standard ]1 03 means SCSI-3 (Ultra160) implemented. Note. Seagate has chosen to set this bit to 03, SCSI-3 hard coded in the drive firmware that is stored in flash EPROM nonvolatile memory on the drive
  • Seagate Savvio 10K | Savvio 10K.1 SCSI Product Manual - Page 54
    they are installed from saved or default values after a power on reset, hard reset, or Bus Device Reset message. Changeable values form a bit mask, Ultra160 implementation (see the SCSI Command Reference Manual). Definitions: DEF = Default value. Standard drives are shipped configured this way. CHG=
  • Seagate Savvio 10K | Savvio 10K.1 SCSI Product Manual - Page 55
    00 00 CHG 80 06 f7 40 0f 00 00 00 Read capacity data 08 8b b9 97 00 00 02 00 Savvio SCSI Product Manual, Rev. D 49
  • Seagate Savvio 10K | Savvio 10K.1 SCSI Product Manual - Page 56
    00 CHG 80 06 f7 40 0f 00 00 00 Read capacity data 04 45 dc cb 00 00 02 00 50 Savvio SCSI Product Manual, Rev. D
  • Seagate Savvio 10K | Savvio 10K.1 SCSI Product Manual - Page 57
    SCSI bus conditions supported by the drive are listed below. These conditions cause the SCSI device to perform certain actions and can alter the SCSI bus phase sequence. Other miscellaneous operating features supported are also listed here. Refer to the SCSI Interface Product Manual for details
  • Seagate Savvio 10K | Savvio 10K.1 SCSI Product Manual - Page 58
    160.0 80.0 40.0 20.0 Table 18 lists the synchronous data transfer periods supported by the drive in ST DATA phase. ST DATA phase is allowed with either LVD or of Seagate drive interfaces are given in the SCSI Interface Product Manual. 9.6.1 DC cable and connector SFF.1 LC model drives receive
  • Seagate Savvio 10K | Savvio 10K.1 SCSI Product Manual - Page 59
    respond in an acceptable manner (per applicable SCSI Standards) to reject newer Ultra320 protocol extensions that they don't support. The drives documented in this manual support single-ended and low voltage differential physical interconnects (hereafter referred to as SE and LVD, respectively) as
  • Seagate Savvio 10K | Savvio 10K.1 SCSI Product Manual - Page 60
    supported by the various drive models defined in this manual. Table 19: Interface transfer rates supported Interface type/ drive drives drives drive drive support a series of drives. To insure that both drive connector and host equipment mating connector mate properly, both drive connector Seagate
  • Seagate Savvio 10K | Savvio 10K.1 SCSI Product Manual - Page 61
    Right-angle to PCBA connectors Seagate P/N: 77678559 Amp US P/N: 2-557101-1 Amp Japan P/N: 5-175474-9 For additional information call Amp FAX service at 1-800-522-6752. 7.00 (.276) Grounding Pins 57.87 0 (2.278) -0.15 [ 80 Grounding Pins Back View Savvio SCSI Product Manual, Rev. D 55
  • Seagate Savvio 10K | Savvio 10K.1 SCSI Product Manual - Page 62
    MATED 2 5 V GND 5 V GND ACTIVE LED OUT [4] [9] DLYD-START [6] [9] [12] SCSI ID (1) [7] [9] [12] SCSI ID (3) [7] [9] [12] Notes [ ]: See page following Table 21. 56 Savvio SCSI Product Manual, Rev. D
  • Seagate Savvio 10K | Savvio 10K.1 SCSI Product Manual - Page 63
    +DB13 +DB12 MATED 2 5 V GND 5 V GND ACTIVE LED OUT [4] [9] DLYD_START [6] [9] [12] SCSI ID (1) [7] [9] [12] SCSI ID (3) [7] [9] [12] Notes [ ]: See page following this table. Savvio SCSI Product Manual, Rev. D 57
  • Seagate Savvio 10K | Savvio 10K.1 SCSI Product Manual - Page 64
    drive activity for host front panel hard drive drive. [8] GND provides a means for differential devices to detect the presence of a single ended device on the bus. Drive tied high by the drive circuitry. The preferred electrical drives drive V, the drive interface circuits Drives drives drives drive
  • Seagate Savvio 10K | Savvio 10K.1 SCSI Product Manual - Page 65
    for use on drives that plug directly drives are designed to be plugged into a backpanel connector without cabling. 9.8.1 Terminator power These drives cannot furnish terminator power because no conductors in the 80-pin I/O connector are devoted to terminator power. Savvio SCSI Product Manual
  • Seagate Savvio 10K | Savvio 10K.1 SCSI Product Manual - Page 66
    timing Table 22: Disc drive SCSI timing These values are not current Savvio SCSI values, but are listed for information μs 0.79 μs 0.04 μs 0.58 μs 0.12 μs 0.12 μs 0.12 μs 0.12 μs 0.59 μs 0.11 μs ±1 μs 0.12 μs ±1 μs 0.11 μs ±1 μs 0.11 μs ±1 μs 0.13 μs ±1 μs 60 Savvio SCSI Product Manual, Rev. D
  • Seagate Savvio 10K | Savvio 10K.1 SCSI Product Manual - Page 67
    . [2] Maximum SCSI asynchronous interface transfer rate is given in Section 4.2.3 of this manual. [3] Synchronous Transfer Period is determined by negotiations between an Initiator and a Drive. The Drive is capable of setting periods as given in Section 9.5. See also the Synchronous data transfer
  • Seagate Savvio 10K | Savvio 10K.1 SCSI Product Manual - Page 68
    62 Savvio SCSI Product Manual, Rev. D
  • Seagate Savvio 10K | Savvio 10K.1 SCSI Product Manual - Page 69
    www.seagate.com/support/service/index.html mySeagate my.seagate.com is the industry's first Web portal designed specifically for OEMs and distributors. It provides self-service access to critical applications, personalized content and the tools that allow our partners to manage their Seagate account
  • Seagate Savvio 10K | Savvio 10K.1 SCSI Product Manual - Page 70
    Operations Warranty Service Seagate offers worldwide customer support for Seagate products. Seagate distributors, OEMs and other direct customers should contact their Seagate Customer Service Operations (CSO) representative for warrantyrelated issues. Resellers or end users of drive products should
  • Seagate Savvio 10K | Savvio 10K.1 SCSI Product Manual - Page 71
    message 48 bytes per sector 46 bytes/surface 11 bytes/track 11 Savvio SCSI Product Manual, Rev. D C cable 52 cache 13, 14 cache buffer 8 cache miss write data 14 Canadian Department of Communications 3 capacities 10 capacity, drive, programmable 9 case temperature 31 CE Marking 4 changeable bit 48
  • Seagate Savvio 10K | Savvio 10K.1 SCSI Product Manual - Page 72
    drive 34 drive activity 58 drive capacity 11 programmable 9 drive default mode parameter 39 drive failure 18 drive firmware 47 drive ID 39 drive interface connector 54 drive internal 26 drive internal defects and errors 37 drive malfunction 18 drive management grounding 40 H hard reset 48 hardware
  • Seagate Savvio 10K | Savvio 10K.1 SCSI Product Manual - Page 73
    vital product data 47 installation 39 installation guide 5, 9, 10 installation instructions 39 instantaneous current peak 25 interface data P package size 33 package test specification 5 packaged 33 partition or logical drive 39 PCB 19 PCBA 40, 47, 53, 54 PCBA circuit run 53 Manual, Rev. D 71
  • Seagate Savvio 10K | Savvio 10K.1 SCSI Product Manual - Page 74
    electronics 7 product data page 47 programmable drive capacity 9 R radio interference regulations 47, 48 Savvio SCSI Installation Guide 5 SCSI commands 43 format commands Manual 3, 5, 7 SCSI systems error 38 SCSI systems error consideration 37 SCSI systems error management 38 Seagate support service
  • Seagate Savvio 10K | Savvio 10K.1 SCSI Product Manual - Page 75
    37 straight-in connector 54 strict bit in Mode page 00h 13 supply voltage 26 support services 63 synchronous data transfer 51 synchronous data transfer operation 61 synchronous data transfer period 52 14 write retry count 37 Z zoned bit recording (ZBR) 8 Savvio SCSI Product Manual, Rev. D 73
  • Seagate Savvio 10K | Savvio 10K.1 SCSI Product Manual - Page 76
  • Seagate Savvio 10K | Savvio 10K.1 SCSI Product Manual - Page 77
  • Seagate Savvio 10K | Savvio 10K.1 SCSI Product Manual - Page 78
    Seagate Technology LLC 920 Disc Drive, Scotts Valley, California 95066-4544, USA Publication Number: 100293075, Rev. D, Printed in USA
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
Product Manual
Savvio SCSI
100293075
Rev. D
August 2007
ST973401LC
ST936701LC