Seagate Savvio 15K Savvio 15K.1 FC User Guide

Seagate Savvio 15K Manual

Get Seagate Savvio 15K PDF manuals and user guides View all Seagate Savvio 15K manuals
Add to My Manuals
Save this manual to your list of manuals

Seagate Savvio 15K manual content summary:

  • Seagate Savvio 15K | Savvio 15K.1 FC User Guide - Page 1
    Product Manual Savvio® 15K.1 FC ST973451FC ST936751FC 100384763 Rev. B August 2007
  • Seagate Savvio 15K | Savvio 15K.1 FC User Guide - Page 2
    trademarks are the property of their respective owners. One gigabyte, or GB, equals one billion bytes when referring to hard drive capacity. Accessible capacity may vary depending on operating environment and formatting. Quantitative usage examples for various applications are for illustrative
  • Seagate Savvio 15K | Savvio 15K.1 FC User Guide - Page 3
    service 16 5.2.1 Annualized Failure Rate (AFR) and Mean Time Between Failure (MTBF) . . . . 16 5.2.2 Preventive maintenance 16 5.2.3 Hot plugging the drive 17 5.2.4 S.M.A.R.T 17 5.2.5 Thermal monitor 18 5.2.6 Drive Self Test (DST 19 5.2.7 Product warranty 21 Savvio 15K.1 FC Product Manual
  • Seagate Savvio 15K | Savvio 15K.1 FC User Guide - Page 4
    Drive orientation 41 8.2 Cooling 41 8.3 Drive mounting 42 8.4 Grounding 42 9.0 Interface requirements 43 9.1 FC-AL features 43 9.1.1 Fibre Channel link service frames 43 9.1.2 Fibre Channel task management 49 9.2 Dual port support 49 9.3 SCSI commands supported 50 9.3.1 Inquiry data
  • Seagate Savvio 15K | Savvio 15K.1 FC User Guide - Page 5
    lines 62 9.5.12 Device control codes 64 9.6 Signal characteristics 64 9.6.1 TTL input characteristics 64 9.6.2 Differential PECL output 65 9.6.3 Differential PECL input 65 10.0 Seagate Technology support services 67 Savvio 15K.1 FC Product Manual, Rev. B iii
  • Seagate Savvio 15K | Savvio 15K.1 FC User Guide - Page 6
    iv Savvio 15K.1 FC Product Manual, Rev. B
  • Seagate Savvio 15K | Savvio 15K.1 FC User Guide - Page 7
    . Savvio 15K.1 family disc drive 1 Typical ST973451FC drive +12V and +5V current profiles 25 Typical ST936751FC drive +12V and +5V current profiles Locations of the HDA temperature check point 31 Recommended mounting 33 Drive dimensions (inches 36 Air flow 42 Physical interface 57 Port bypass
  • Seagate Savvio 15K | Savvio 15K.1 FC User Guide - Page 8
  • Seagate Savvio 15K | Savvio 15K.1 FC User Guide - Page 9
    Technology® LLC, Savvio® 15K.1 FC (Fibre Channel) disc drives. Savvio drives support the Fibre Channel Arbitrated Loop and SCSI Fibre Channel Protocol specifications to the extent described in this manual. The Fibre Channel Interface Manual (part number 77767496) describes the general Fibre Channel
  • Seagate Savvio 15K | Savvio 15K.1 FC User Guide - Page 10
    2 Savvio 15K.1 FC Product Manual, Rev. B
  • Seagate Savvio 15K | Savvio 15K.1 FC User Guide - Page 11
    Standards The Savvio family complies with Seagate standards as noted in the appropriate sections of this manual and the Seagate Fibre Channel Interface Manual, part number 100293070. The Savvio disc drive is a UL recognized component per UL1950, CSA certified to CAN/CSA C22.2 No. 95095, and VDE
  • Seagate Savvio 15K | Savvio 15K.1 FC User Guide - Page 12
    and C-Tick Marking. The drive was tested in a representative use microprocessor • 3.5-inch floppy disc drive • Keyboard • Monitor/display • ) Framework requirements of Australia's Spectrum Management Agency (SMA). Korean MIC If and materials for the disc drives documented in this publication.
  • Seagate Savvio 15K | Savvio 15K.1 FC User Guide - Page 13
    Guide Seagate part number: 100384764 Fibre Channel Interface Manual Seagate part number: 100293070 SCSI Commands Reference Manual Seagate Selection Specification for 40-pin SCA-2 Connector with Bidirectional Enclosure Services Interface ANSI Small Computer System Interface (SCSI) Documents X3
  • Seagate Savvio 15K | Savvio 15K.1 FC User Guide - Page 14
    6 Savvio 15K.1 FC Product Manual, Rev. B
  • Seagate Savvio 15K | Savvio 15K.1 FC User Guide - Page 15
    Manual (part number 100293070) which describes the general interface characteristics of this drive. Savvio drives are classified as intelligent peripherals and provide level 2 conformance (highest level) with the ANSI SCSI-1 standard. Note. Never disassemble the HDA and do not attempt to service
  • Seagate Savvio 15K | Savvio 15K.1 FC User Guide - Page 16
    interface • Supports SCSI enclosure services via interface connector • 128-deep task set (queue) • Supports up to 32 initiators • Drive selection ID Automatic shipping lock • Self-diagnostics performed when power is applied to the drive • Zone bit recording (ZBR) • Vertical, horizontal, or top down
  • Seagate Savvio 15K | Savvio 15K.1 FC User Guide - Page 17
    drive processing of queue • Supports start and stop commands 445DCCCh 42F212Bh 4194B80h 4102065h 2. Seagate drives also may be used at the guaranteed level will vary between other drive families and from generation to generation capacities listed above. Using the drives in this manner gives the
  • Seagate Savvio 15K | Savvio 15K.1 FC User Guide - Page 18
    Manual, part number 100293070. Refer to the Parameter list block descriptor number of blocks field. A value of zero in the number of blocks field indicates that the drive -installed accessories OEM standard drives are shipped with the Savvio 15K.1 FC Installation Guide (part number 100384764) and
  • Seagate Savvio 15K | Savvio 15K.1 FC User Guide - Page 19
    characteristics and features of Savvio drives. 4.1 Internal drive characteristics ST973451FC Drive capacity 73.4 Read/write data FC-AL physical interface" on page 57 and the Fibre Channel Interface Manual (part number 100293070) for additional timing details. 4.2.1 Access time Average
  • Seagate Savvio 15K | Savvio 15K.1 FC User Guide - Page 20
    first logical block transfer to or from the host. 4.3 Start/stop time The drive accepts the commands listed in the SAS Interface Manual less than 3 seconds after DC power has been applied. If the drive receives a NOTIFY (ENABLE SPINUP) primitive through either port and has not received a START
  • Seagate Savvio 15K | Savvio 15K.1 FC User Guide - Page 21
    as described in sections 4.5.1 and 4.5.2. 4.5 Cache operation Note. Refer to the Fibre Channel Interface Manual for more detail concerning the cache bits. Of the 16 Mbytes physical buffer space in the drive, approximately 13,000 Kbytes can be used as a cache. The buffer can be divided into
  • Seagate Savvio 15K | Savvio 15K.1 FC User Guide - Page 22
    drive does not overwrite data the drive may to force the drive to write all for the drive. 4.5.2 DRA bit = 0 enables prefetch. The drive does not use the Max Prefetch field ( drive enables prefetch of contiguous blocks from the disc when it senses that a prefetch hit will likely occur. The drive
  • Seagate Savvio 15K | Savvio 15K.1 FC User Guide - Page 23
    correction with ECC enabled and all flaws reallocated. 5.1 Error rates The error rates stated in this manual assume the following: • The drive is operated in accordance with this manual using DC power as defined in paragraph 6.2, "DC power requirements." • Errors caused by host system failures
  • Seagate Savvio 15K | Savvio 15K.1 FC User Guide - Page 24
    a failure of the drive to recover data from the media. These errors occur due to head/media or write problems. Unrecoverable data errors are information that may be used to enhance the service life of the drive. Section 8.1 provides recommended air-flow information. 15K.1 FC Product Manual, Rev. B
  • Seagate Savvio 15K | Savvio 15K.1 FC User Guide - Page 25
    CRC are able to detect any error. Recovery is initiated based on the type of error. The disc drive defaults to the FC-AL Monitoring state, Pass-through state, when it is powered-on by switching the power S.M.A.R.T. with the RTZ command resets the timer. Savvio 15K.1 FC Product Manual, Rev. B 17
  • Seagate Savvio 15K | Savvio 15K.1 FC User Guide - Page 26
    predictive failures when the drive is performing unacceptably for drive temperature and issues a warning over the interface when the temperature exceeds a set threshold. The temperature is measured at power-up and then at ten-minute intervals after power-up. 18 Savvio 15K.1 FC Product Manual
  • Seagate Savvio 15K | Savvio 15K.1 FC User Guide - Page 27
    it reports a fault condition. If the drive fails the test, remove it from service and return it to Seagate for service. 5.2.6.1 DST failure definition The drive will present a "diagnostic failed" condition will not be reported as diagnostic failures. Savvio 15K.1 FC Product Manual, Rev. B 19
  • Seagate Savvio 15K | Savvio 15K.1 FC User Guide - Page 28
    ) The purpose of the short test is to provide a time-limited test that tests as much of the drive as possible within 120 seconds. The short test does not scan the entire media surface, but does some fundamental is reported through the Control Mode page. 20 Savvio 15K.1 FC Product Manual, Rev. B
  • Seagate Savvio 15K | Savvio 15K.1 FC User Guide - Page 29
    products on your purchase documentation. The remaining warranty for a particular drive can be determined by calling Seagate Customer Service at 1-800-468-3472. You can also determine remaining warranty carrier experienced in handling computer equipment. Savvio 15K.1 FC Product Manual, Rev. B 21
  • Seagate Savvio 15K | Savvio 15K.1 FC User Guide - Page 30
    return information Seagate customer service centers are the only facilities authorized to service Seagate drives. Seagate does not sanction any third-party repair facilities. Any unauthorized repair or tampering with the factory seal voids the warranty. 22 Savvio 15K.1 FC Product Manual, Rev. B
  • Seagate Savvio 15K | Savvio 15K.1 FC User Guide - Page 31
    power requirements The voltage and current requirements for a single drive are shown below. Values indicated apply at the drive connector. Table 2: DC power requirements for ST973451FC ST973451FC Maximum (peak) DC 3σ 1.28 1.16 1.34 1.16 1.38 1.16 Savvio 15K.1 FC Product Manual, Rev. B 23
  • Seagate Savvio 15K | Savvio 15K.1 FC User Guide - Page 32
    drive power requirements should be noted. Where multiple units are powered on simultaneously, the peak starting current must be available to each device. 4. Parameters, other than spindle start, are measured after a 10-minute warm up. 5. No terminator power. 24 Savvio 15K.1 FC Product Manual
  • Seagate Savvio 15K | Savvio 15K.1 FC User Guide - Page 33
    The +12V and +5V current profiles are shown below. Note: All times and currents are typical. See Table 2 for maximum current requirements. Figure 2. Typical ST973451FC drive +12V and +5V current profiles Savvio 15K.1 FC Product Manual, Rev. B 25
  • Seagate Savvio 15K | Savvio 15K.1 FC User Guide - Page 34
    Figure 3. Typical ST936751FC drive +12V and +5V current profiles 26 Savvio 15K.1 FC Product Manual, Rev. B
  • Seagate Savvio 15K | Savvio 15K.1 FC User Guide - Page 35
    operations, refer to the following I/O rate curve (see Figure 4). Locate the typical I/O rate for a drive in your system on the horizontal axis and read the corresponding +5 volt current, +12 volt current, vs. input/output operations per second at 2 Gbit Savvio 15K.1 FC Product Manual, Rev. B 27
  • Seagate Savvio 15K | Savvio 15K.1 FC User Guide - Page 36
    (watts) 5Vo lt A 12 Volt A Watts Figure 6. ST973451FC DC current and power vs. input/output operations per second at 4 Gbit 28 Savvio 15K.1 FC Product Manual, Rev. B
  • Seagate Savvio 15K | Savvio 15K.1 FC User Guide - Page 37
    , refer to the following I/O rate curve (see Figure 4). Locate the typical I/O rate for a drive in your system on the horizontal axis and read the corresponding +5 volt current, +12 volt current, and power vs. input/output operations per second at 2 Gbit Savvio 15K.1 FC Product Manual, Rev. B 29
  • Seagate Savvio 15K | Savvio 15K.1 FC User Guide - Page 38
    drive must be such that condensation does not occur on any drive drive meets all specifications over a 41°F to 131°F (5°C to 55°C) drive drives ability to meet specifications. The MTBF specification for the drive Occasional excursions to drive ambient temperatures of , place the drive in its final
  • Seagate Savvio 15K | Savvio 15K.1 FC User Guide - Page 39
    Shock and vibration Shock and vibration limits specified in this document are measured directly on the drive chassis. If the drive is installed in an enclosure to which the stated shock and/or vibration criteria is msec (half sinewave). Shock occurring at Savvio 15K.1 FC Product Manual, Rev. B 31
  • Seagate Savvio 15K | Savvio 15K.1 FC User Guide - Page 40
    drives and integrated drives. The drive or Z axis. The drive subjected to nonrepetitive shock not or Z axis. The drive subjected to nonrepetitve shock not axis. d. Packaged Disc drives shipped as loose load (not in (1067 mm) 36 in (914 mm) Drives packaged in single or multipacks with a gross weight
  • Seagate Savvio 15K | Savvio 15K.1 FC User Guide - Page 41
    Z Y X X Z Y Figure 11. Recommended mounting Savvio 15K.1 FC Product Manual, Rev. B 33
  • Seagate Savvio 15K | Savvio 15K.1 FC User Guide - Page 42
    shall apply to all conditions of handling and transportation. This includes both isolated drives and integrated drives. The drive shall not incur physical damage or degraded performance as a result of continuous circuitry with sulfide-free alternatives. 34 Savvio 15K.1 FC Product Manual, Rev. B
  • Seagate Savvio 15K | Savvio 15K.1 FC User Guide - Page 43
    3.1 bels typical when measured to ISO 7779 specification. There will not be any discrete tones more than 10 dB above the masking noise on typical drives when measured according to Seagate specification 30553-001. There will not be any tones more than 24 dB above the masking noise on any
  • Seagate Savvio 15K | Savvio 15K.1 FC User Guide - Page 44
    .379 +/- .010 .276 .583 +/- .014 .158 1.447 .160 +/- .010 2.430 +/- .010 .118 +/- .008 Measurements shown in inches 3.016 +/- .010 .379 +/- .010 2.755 +/- .008 Figure 12. Drive dimensions (inches) 36 Savvio 15K.1 FC Product Manual, Rev. B
  • Seagate Savvio 15K | Savvio 15K.1 FC User Guide - Page 45
    page. Error recovery and defect management may involve using several SCSI commands described in the SCSI Commands Reference Manual. The drive implements selectable error recovery time limits required in video applications. The error recovery scheme supported by the drive provides a way to control
  • Seagate Savvio 15K | Savvio 15K.1 FC User Guide - Page 46
    Diagnostic Results reports the results of diagnostic operations performed by the drive. Status returned by the drive to the initiator is described in the Fibre Channel Interface Manual. Status reporting plays a role in systems error management and its use in that respect is described in sections
  • Seagate Savvio 15K | Savvio 15K.1 FC User Guide - Page 47
    of the media while the drive is idle. In RAID arrays, BMS allows hot spare drives to be scanned for defects prior to being put into service by the host system. On regular duty drives, if the host system is being attempted to a previously failing location. Savvio 15K.1 FC Product Manual, Rev. B 39
  • Seagate Savvio 15K | Savvio 15K.1 FC User Guide - Page 48
    recently written data from the media and compares it to valid write command data resident in the drives data buffer. Any sectors that fail the comparison result in the invocation of a rewrite and rewrite fails, the sector is re-mapped to a spare location. 40 Savvio 15K.1 FC Product Manual, Rev. B
  • Seagate Savvio 15K | Savvio 15K.1 FC User Guide - Page 49
    information about this connector. Use the FC-AL interface to select drive ID and all option configurations for devices on the loop. no two devices have the same selection ID. This is called the hard assigned arbitrated loop physical address (AL_PA). There are 125 AL_PAs available Manual, Rev. B 41
  • Seagate Savvio 15K | Savvio 15K.1 FC User Guide - Page 50
    Under unit 8.3 Drive mounting Use M3 x .5 metric screws to mount the drive using either side, the drive in any kind of adapter frame, verify that the drive can the drive and cannot be separated by the user. The equipment in which the drive is ) method of mounting the drive in the host equipment.
  • Seagate Savvio 15K | Savvio 15K.1 FC User Guide - Page 51
    Channel Interface Manual (part number 100293070). 9.1 FC-AL features This section lists the Fibre Channel-specific features supported by Savvio drives. 9.1.1 Fibre Channel link service frames Table 5 lists the link services supported by Savvio drives. Table 5: Link services supported Type of
  • Seagate Savvio 15K | Savvio 15K.1 FC User Guide - Page 52
    SCSI FCP) task management functions supported. Table 6: Fibre Channel SCSI FCP task management functions Task name Supported Terminate task No Clear Fibre Channel task management responses Table 7 lists the FC SCSI FCP response codes returned for task management functions supported. Table 7:
  • Seagate Savvio 15K | Savvio 15K.1 FC User Guide - Page 53
    offset Not checked. Port Login Accept will return a 0-not supported. Valid version level x N_Port/F_Port Must = 0, N_Port Node name. The node name is not checked or saved by the drive. SO Service options Class 3 only. MSB Class valid Must = 1 Intermix .1 FC Product Manual, Rev. B 45
  • Seagate Savvio 15K | Savvio 15K.1 FC User Guide - Page 54
    ) are currently factory set to 00 04 CF respectively (subject to change). FS Receive buffer field size. The drive returns and uses the receive buffer size from the N_Port Login Class 3 receive buffer. UI Unique identifier. This fields that are not used. 46 Savvio 15K.1 FC Product Manual, Rev. B
  • Seagate Savvio 15K | Savvio 15K.1 FC User Guide - Page 55
    Fibre Channel fabric login Table 12 lists the fabric login payload from the drive. Table 12: Fabric Login (FLOGI) payload Bytes 0-15 04 00 00 change). UI Unique identifier. This 24-bit field is uniquely assigned to the drive. This same UI appears in the Port Name and Node Name fields. P
  • Seagate Savvio 15K | Savvio 15K.1 FC User Guide - Page 56
    . This field is not checked. The FC-AL drive uses BB-Credit of zero (0). CF Common features. field size in the Class 3 parameters is used. The drive uses the lower FS of Fabric Login Accept or N_Port NN Node Name. The drive does not check or save the node name. SO Service Options-Class 3 only.
  • Seagate Savvio 15K | Savvio 15K.1 FC User Guide - Page 57
    ports are connected in the same loop and hard addressing is used, at least one port will attempt taking a soft address to prevent an address conflict. Subject to buffer availability, the Savvio drives support: • Concurrent port transfers-The drive supports receiving transfers on both ports at the
  • Seagate Savvio 15K | Savvio 15K.1 FC User Guide - Page 58
    Table 15 lists the SCSI commands supported by Savvio drives. Table 15: Supported commands Command code Supported [4] Command name 00h Y Test unit ready 01h Y Rezero unit 03h Y Request Y Unit attention page (00h) Y Error recovery page (01h) 50 Savvio 15K.1 FC Product Manual, Rev. B
  • Seagate Savvio 15K | Savvio 15K.1 FC User Guide - Page 59
    code Supported [4] Command name Y Disconnect/reconnect control (page 02h) Y Format page (03h) Y Rigid disc drive geometry Supported diagnostics pages Y Translate page Y Enclosure services page 1Dh Y Send diagnostics page Y Supported diagnostics 15K.1 FC Product Manual, Rev. B 51
  • Seagate Savvio 15K | Savvio 15K.1 FC User Guide - Page 60
    commands (continued) Command code Supported [4] Command name 2Fh Y Verify Y Disable page out Y Byte check N Relative address 30h N Search data high Y Read long 3Fh Y Write long 40h N Change definition 41h Y Write same N PBdata 52 Savvio 15K.1 FC Product Manual, Rev. B
  • Seagate Savvio 15K | Savvio 15K.1 FC User Guide - Page 61
    [4] Command name N LBdata 42-4Bh N Not used 4Ch Y Log Select 4Dh Y Log Sense Y Support Log page (00h) Y Write Error Counter page (02h) Y Read Error Counter page (03h) N Read reserve in 5F A Persistent reserve out 60-7Fh N Not used Savvio 15K.1 FC Product Manual, Rev. B 53
  • Seagate Savvio 15K | Savvio 15K.1 FC User Guide - Page 62
    flash programming can result in firmware corruption. This usually makes the drive inoperable. [3] Reference Mode Sense command 1Ah for mode pages supported. [4] Y = Yes. Command is supported. N = No. Command is not supported. A = Support is available on special request. 54 Savvio 15K.1 FC Product
  • Seagate Savvio 15K | Savvio 15K.1 FC User Guide - Page 63
    Inquiry command data that the drive should return to the initiator per the format given in the Fibre Channel Interface Manual. Table 16: Savvio inquiry data product serial number. [ ] Bytes 18 through 26 reflect model of drive. The table above shows the hex values for Model ST973451FC. Refer to
  • Seagate Savvio 15K | Savvio 15K.1 FC User Guide - Page 64
    support column indicates the feature or condition is supported. An "N" in the support column indicates the feature or condition is not supported. Table 17: Miscellaneous features Supported to 128 queue tags supported) Y Deferred error Table 18: Miscellaneous status Supported Status Y Good Y
  • Seagate Savvio 15K | Savvio 15K.1 FC User Guide - Page 65
    characteristics are provided within this section. The operational aspects of Seagate's Fibre Channel drives are provided in the Fibre Channel Interface Manual.. Figure 14. Physical interface 9.5.1 Physical characteristics This section defines physical interface connector. 9.5.1.1 Physical
  • Seagate Savvio 15K | Savvio 15K.1 FC User Guide - Page 66
    use the FC-SCA connector for: • DC power • FC-AL interface • Drive select (device identification) • Option selection • Enclosure Services interface This 40-pin connector is designed to plug directly into a backpanel. External cables are not required. 58 Savvio 15K.1 FC Product Manual, Rev. B
  • Seagate Savvio 15K | Savvio 15K.1 FC User Guide - Page 67
    in mating backpanel connector. [1] This pin may be connected to external logic to detect the presence of the drive. The drive connects this pin to the common ground. [2] Pins 9, 10, 17, 18, and 39 are option select ohm), or grounded through some other means. Savvio 15K.1 FC Product Manual, Rev. B 59
  • Seagate Savvio 15K | Savvio 15K.1 FC User Guide - Page 68
    environments. 9.5.6 Power Power is supplied through the FC-SCA with support for +5 volts and +12 volts. All of the voltage pins in the drive connector are the same length. Four 12 volt pins provide + current-limiting resistor are external to the drive. 60 Savvio 15K.1 FC Product Manual, Rev. B
  • Seagate Savvio 15K | Savvio 15K.1 FC User Guide - Page 69
    an appropriate current limiting resistor. The LED and the current limiting resistor are external to the drive. 9.5.9 Enable port bypass signals The - Enable Bypass Port A (- EN BYP Port A) value of the numeric SEL ID of the drive from DC power on. Savvio 15K.1 FC Product Manual, Rev. B 61
  • Seagate Savvio 15K | Savvio 15K.1 FC User Guide - Page 70
    bits of enclosure status and a bidirectional mode. ESI support and the mode are determined by the drive using a discovery process. Refer to the Fibre Channel Interface Manual for a description of ESI operation. 9.5.11.1 Parallel Enclosure Services Interface (ESI) The parallel ESI line is an output
  • Seagate Savvio 15K | Savvio 15K.1 FC User Guide - Page 71
    98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 Savvio 15K.1 FC Product Manual, Rev. B 63
  • Seagate Savvio 15K | Savvio 15K.1 FC User Guide - Page 72
    . If the backpanel does not connect to these lines, the drive has 10K ohm pull up resistors that default the device control code to 7 (1.0625 GHz). Table lists the supported codes. Table 24: Device control code values 2 (pin 17 IOH < -500µA IOL < 1.6mA 64 Savvio 15K.1 FC Product Manual, Rev. B
  • Seagate Savvio 15K | Savvio 15K.1 FC User Guide - Page 73
    data valid eye diagram for typical and minimum requirements to recover data at the specified interface error rate. The inputs are AC coupled on the drive. 941 ps Vin (mv) 659 ps 376 ps Figure 19. Receive eye diagram Typical Minimum Savvio 15K.1 FC Product
  • Seagate Savvio 15K | Savvio 15K.1 FC User Guide - Page 74
    66 Savvio 15K.1 FC Product Manual, Rev. B
  • Seagate Savvio 15K | Savvio 15K.1 FC User Guide - Page 75
    www.seagate.com/support/service/index.html mySeagate my.seagate.com is the industry's first Web portal designed specifically for OEMs and distributors. It provides self-service access to critical applications, personalized content and the tools that allow our partners to manage their Seagate account
  • Seagate Savvio 15K | Savvio 15K.1 FC User Guide - Page 76
    Operations Warranty Service Seagate offers worldwide customer support for Seagate products. Seagate distributors, OEMs and other direct customers should contact their Seagate Customer Service Operations (CSO) representative for warrantyrelated issues. Resellers or end users of drive products should
  • Seagate Savvio 15K | Savvio 15K.1 FC User Guide - Page 77
    backpanel 58 backplane 61 basic link service frames 43 Basic_Accept (BA_ACC) 43 Basic_Reject (BA_RJT) 43 Savvio 15K.1 FC Product Manual, Rev. B BB 45, 48 valid 45, 48 clear ACA function 44 clear task set function 44 commands supported 50 Common features 45, 48 Company ID 46, 47 Compare command 52
  • Seagate Savvio 15K | Savvio 15K.1 FC User Guide - Page 78
    for SCSI, document 5 response codes 44 task management functions 44 FC-PH document 5 features 8 interface 43 Fibre Channel documents 5 Fibre Channel Interface Control page (19h) 51 Fibre Channel Interface Manual 1, 3, 5 Fibre Channel Services 43 Field pointer bytes command 50 firmware 8 corruption
  • Seagate Savvio 15K | Savvio 15K.1 FC User Guide - Page 79
    command 50 inquiry data 55 installation 41 guide 5 interface 41 commands supported 50 description 57 error rate 15 errors drive characteristics 11 J Jumper settings page command 50 jumpers 41 L latency average rotational 11, 12 LBdata 53 Link Service Reject (LS_RJT) 43 link services supported
  • Seagate Savvio 15K | Savvio 15K.1 FC User Guide - Page 80
    offset 45, 48 RCD bit 13 Read buffer command 52 Read capacity command 51 Read combined header and data mode (0) 52 Savvio 15K.1 FC Product Manual, Rev. B
  • Seagate Savvio 15K | Savvio 15K.1 FC User Guide - Page 81
    53 resonance 31 return information 22 Rezero unit command 50 Rigid disc drive geometry page command 51 rotation speed 11 running disparity 17 S safety 3 SCA part numbers 58 SCSI Commands Reference Manual 5 SCSI interface commands supported 50 Search data equal command 52 high command 52 low command
  • Seagate Savvio 15K | Savvio 15K.1 FC User Guide - Page 82
    44 task set full status 56 technical support services 67 temperature 30 limits 30 non-operating 11 Translate page command 51 transmit eye diagram 65 transmitters 60 transporting the drive 21 TTL input characteristics 64 U UI 46, 47 unformatted 9 unique identifier 15K.1 FC Product Manual, Rev. B
  • Seagate Savvio 15K | Savvio 15K.1 FC User Guide - Page 83
  • Seagate Savvio 15K | Savvio 15K.1 FC User Guide - Page 84
    Seagate Technology LLC 920 Disc Drive, Scotts Valley, California 95066-4544, USA Publication Number: 100384763, Rev. B, Printed in USA
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
Product Manual
Savvio
®
15K.1 FC
100384763
Rev. B
August 2007
ST973451FC
ST936751FC