Sealey LED0131R Instruction Manual

INTERCHANGEABLE 3-IN-ONE COB LED

RECHARGEABLE INSPECTION LAMP

MODEL NO:

LED0131R

Thank you for purchasing a Sealey product. Manufactured to a high standard, this product will, if used according to these instructions,

and properly maintained, give you years of trouble free performance.

1. SAFETY

1.1.

ELECTRICAL SAFETY

9

Inspect the cable and connector for wear and damage to ensure items are safe before connecting to the power supply. If worn or

damaged

DO NOT

use.

9

Ensure the lamp is fully charged before initial use.

8

DO NOT

charge in damp conditions.

8

DO NOT

turn the lamp on when it is being charged.

8

DO NOT

shine directly into your, another person’s or

an animal’s eyes.

8

DO NOT

allow children to use the lamp.

8

DO NOT

handle or move the lamp whilst it is being charged.

8

DO NOT

use the lamp if you suspect that the battery or the lamp casing is damaged.

8

DO NOT

leave battery in a discharged state, recharge battery immediately. Before storage, fully recharge the battery, subsequently

recharge the battery at least once every six months of non-use.

8

DO NOT

attempt to open, disassemble, modify or service the battery pack.

8

DO NOT

crush, puncture, short external contacts or dispose of in fire or water.

8

DO NOT

expose to temperatures above 60°C (140°).

9

Replace only with the battery pack designated for this product.

9

Recycle or dispose of used battery as stipulated by local regulation.

9

If the electrolyte in the cells gets on your skin, thoroughly wash with soap and water. If it gets in your eyes, rinse thoroughly with cool

water and seek immediate medical attention.

IMPORTANT WARRANTY INFORMATION

The battery fitted to this lamp is considered to be a consumable item and its ability to accept a charge will reduce over time.

We will provide warranty against mechanical and electrical defect for a period of one year - this does not cover fair wear and tear.

If the battery is not properly charged before first use, or regularly conditioned, its capacity will diminish.

Under these circumstances we will not replace the battery regardless of whether the battery is less than one year old.

2. INTRODUCTION

Innovative 3-in-1 work light. Threaded interface enables user to change between 1000 lumen torch with sliding focus, 450 lumen work light and

a 300 lumen flexi-head. Features a power indicator on the switch and a magnet on the base for hands-free operation. Supplied in a presentation

box with a high quality USB cable.

3. SPECIFICATION

Model No

..............................................................

LED0131R

Battery

.........................................

3.7V 2200mAh Lithium-ion

LED Type.

...................................................

2 x LED 1 x SMD

Charging Time

.................................................................

7hrs

Lumen Output

COB: 450lm, Flexi-headlight:300lm Torch:1000lm

Operating Time

......

(High):Flexi-headlight: 11hrs COB:4.2hrs

....................................................................

Flashlight: 3.3hrs

IP

Rating

.......................................................................

IPX4

4. OPERATION

4.1.

CHARGING

4.1.1.

Insert USB cable into mains plug and plug into mains supply.

4.1.2.

Remove USB socket cover on side of main body of torch.

4.1.3.

Connect the USB lead to the port on the side of the main body and a USB power socket. Turn on the power supply.

4.1.4.

Switch off power supply, remove charging lead and replace socket cover.

4.2.

OPERATION

4.2.1.

TORCH

4.2.1.1.

Attach torch head by screwing onto main body.

4.2.1.2.

To turn on press the on/off button, once for brightest, again for low light and once more to turn off.

Refer to

instructions

LED0131R

Issue 1

17/02/21

Original Language Version

© Jack Sealey Limited