Sealey LED01G Instruction Manual

2 COB + 1

RECHARGEABLE SLIM FOLDING

POCKET LIGHT

MODEL NO:

LED01 SERIES

Thank you for purchasing a Sealey product. Manufactured to a high standard, this product will, if used according to these instructions,

and properly maintained, give you years of trouble free performance.

1. SAFETY

1.1.

GENERAL

9

It is important to ensure that the lamp is fully charged before initial use.

8

DO NOT

turn the lamp on when it is being charged.

8

DO NOT

shine directly into your, another person’s or an animal’s eyes.

8

DO NOT

allow children to use the lamp.

8

DO NOT

leave battery in a discharged state. Recharge battery immediately.

Recharge the battery at least once every six months of non-use.

9

There are no user serviceable components.

DO NOT

dismantle.

8

DO NOT

pull the charger plug from the mains socket by the lead.

1.2.

BATTERY SAFETY

±

WARNING!

To reduce the risk of burns or fire:

8

DO NOT

Attempt to open, disassemble, modify or service the battery pack.

8

DO NOT

Crush, puncture, short external contacts or dispose of in fire or water.

8

DO NOT

Expose to temperatures above 60°C (140°F).

9

Recycle or dispose of used battery as stipulated by local regulation.

9

If the electrolyte in the cells gets on your skin, thoroughly wash with soap and water. If it gets in your eyes, rinse thoroughly with cool

water and seek immediate medical attention

2. INTRODUCTION

S

limline pocket lamp for use in confined spaces. Inspection arm can be folded 180º for hands-free use. Super bright COB and SMD LED, 6000-

7000k, 80+CRI. High impact plastic housing with aluminium light and a strong magnet on the bottom. Rechargeable high quality 3.7V 700mAh

Li-ion battery with a charging time of 2.5 hours. Flashing warning light when battery is low. Includes 1 LED indicator - flashes green for charging,

continuous green for full charge. Charges via a USB Type-C lead. (Supplied with USB Type-C Cable).

3. SPECIFICATION

Model No

.........................................................

LED01 Series

B

attery

....................................................

3.7V 700mAh Li-ion

LED Quantity

................................................

2 COB + 1 SMD

Lumen Output:

Top spotlight

..................................................................

80lm,

F

ront (High/Low)

................................................

200lm/100lm

Rear

.............................................................................

180lm

Operating time:

Top spotlight

......................................................................

3hr

Front

.....................................................................

3.5hr/1.5hr

Rear

..................................................................................

2hr

Charging time:

................................................................

2.5hr

Length:

Folded

.........................................................

165 x 20 x 28mm

Extended

.....................................................

300 x 20 x 28mm

4. CHARGING

4.1.

The battery fitted to this lamp is considered to be a consumable item and its ability to accept charge will reduce over time. We will

warranty it against mechanical and electrical defect for a period of one year, this does not cover fair wear and tear. If the battery is not

properly charged before first use, or regularly conditioned, its capacity will diminish. Under these circumstances we will not replace the

battery even if it is less than one year old.

4.2.

Connect the charger into the charge port on the lamp, see fig.1. Plug into power supply and turn on, the green charge indicator LED on

the lamp will flash as the battery charges. When fully charged the LED turns to continuous green.

4.3.

Charge the battery for 4-5 hours for its initial charge. Normal charge time is approx 2.5hrs. Disconnect from mains supply.

Original Language Version

© Jack Sealey Limited

Refer to

instruction

manual

L

ED01 Series Issue:2 (2) 27/05/20