Sealey LED02G Instruction Manual

2 COB & 1 SMD LED RECHARGEABLE

ALUMINIUM FOLDING POCKET LIGHT

MODEL NO:

LED02G

Thank you for purchasing a Sealey product. Manufactured to a high standard, this product will, if used according to these

instructions, and properly maintained, give you years of trouble free performance.

1. SAFETY

1.1.

GENERAL

9

It is important to ensure that the lamp is fully charged before initial use.

8

DO NOT

turn the lamp on when it is being charged.

8

DO NOT

shine directly into your, another person’s or an animal’s eyes.

8

DO NOT

allow children to use the lamp.

8

DO NOT

leave battery in a discharged state. Recharge battery immediately.

9

Recharge the battery at least once every six months of non-use.

9

There are no user serviceable components.

DO NOT

dismantle.

8

DO NOT

pull the charger plug from the mains socket by the lead.

1.2.

BATTERY SAFETY

±

WARNING!

To reduce the risk of burns or fire:

8

DO NOT

Attempt to open, disassemble, modify or service the battery pack.

8

DO NOT

Crush, puncture, short external contacts or dispose of in fire or water.

8

DO NOT

Expose to temperatures above 60°C (140°F).

9

Recycle or dispose of used battery as stipulated by local regulation.

9

If the electrolyte in the cells gets on your skin, thoroughly rinse with water. If it gets in your eyes, rinse thoroughly with cool

water and seek immediate medical attention.

2. INTRODUCTION

S

limline pocket light for use in confined spaces. Durable aluminium housing. Inspection arm can be folded 180º. Super bright COB and SMD

LED, 6500k. Rechargeable high quality 3.7V 2600mAh Lithium-ion battery. LED Indicators - flash green for charging and continuous green for

fully charged. High-impact IK07 Rated. Strong magnet on base of handle for hands-free use.

3. SPECIFICATION

MODEL NO:

............................................................

LED02G

B

attery:

.................................................

3.7V 2600mAh Li-ion

Charging Time:

..................................................................

4hr

LED Type:

...............................................

2 x COB + 1 x SMD

Length:

...................................................................................

Folded:

........................................................

162 x 29 x 40mm

Extended:

....................................................

304 x 29 x 33mm

Lumen Output:

Top:

..............................................................................

120lm

Front(High/low):

.................................................

800lm/150lm

Rear(High/low):

.....................................................

400/120lm

Operating Time:

.....................................................................

Top Spotlight:

........................................

(120lm)/(8hr runtime)

Front Light:

............................

(800/150lm) (2.5hr/8hr runtime)

Rear Light:

..................................

(400/120lm)/(4/9hr runtime)

4. CHARGING

4.1.

The battery fitted to this light is considered to be a consumable item and its ability to accept charge will reduce over time. We will

warranty it against mechanical and electrical defect for a period of one year, this does not cover fair wear and tear. If the battery is not

properly charged before first use, or regularly conditioned, its capacity will diminish. Under these circumstances we will not replace the

battery even if it is less than one year old.

4.2.

Connect the charger into the charge port on the light. Plug into power supply and turn on, the green charge indicator LED on the light

will flash as the battery charges. When fully charged the three LEDs turns to continuous green.

4.3.

Charge the battery for 4-5 hours for its initial charge. Normal charge time is approx 4hrs. Disconnect from mains supply.

NOTE

:

The Lithium battery does not suffer from memory effect and once fully charged may be stored for up to six months without

another charge.

LED02G Issue 1 16/06/2021

Original Language Version

© Jack Sealey Limited

Refer to

instructions