Sealey LED318G Instruction Manual

RECHARGEABLE INSPECTION LAMP

5W COB + 3W LED + POWER BANK

MODEL NO:

LED318 SERIES

Thank you for purchasing a Sealey product. Manufactured to a high standard, this product will, if used according to these instructions,

and properly maintained, give you years of trouble free performance.

1. SAFETY

1.1.

GENERAL SAFETY

9

Ensure the lamp is fully charged before initial use.

8

DO NOT

turn the lamp on when it is being charged.

8

DO NOT

shine directly into your, another person’s or an animal’s eyes.

8

DO NOT

allow children to use the lamp.

8

DO NOT

handle or move the lamp whilst it is being charged.

8

DO NOT

use the lamp if you suspect that the battery or the lamp casing is damaged.

8

DO NOT

leave battery in a discharged state, recharge battery immediately. Before storage, fully recharge the battery, subsequently

recharge the battery at least once every six months of non-use.

1.2.

BATTERY SAFETY

±

WARNING!

To reduce the risk of burns or fire:

8

DO NOT

attempt to open, disassemble, modify or service the battery pack.

8

DO NOT

crush, puncture, short external contacts or dispose of in fire or water.

8

DO NOT

expose to temperatures above 60°C (140°F).

9

Recycle or dispose of used battery as stipulated by local regulation.

9

If the electrolyte in the cells gets on your skin, thoroughly wash with soap and water. If it gets in your eyes, rinse thoroughly with cool

water and seek immediate medical attention.

2.

i

INTRODUCTION

Lightweight lamp. Featuring a super bright 5W COB LED light source, which gives an even and constant spread of light, producing up

to 400 lumens. 3W High power LED torch producing up to 100 lumens. Integral hanging hook/belt clip with magnet and a magnetic base

which can rotate through 180° for hands free applications. Features a battery level indicator. Rechargeable 3.7V 2Ah Li-ion battery for

longer life, no memory effect and a much slower discharge than traditional Ni-MH batteries. Built in power bank to charge mobile devices.

Micro USB charging port. Supplied with USB cable.

3.

i

SPECIFICATION

M

odel No:

.......................................................

LED318 Series

B

attery

...........................................................

3.7V 2Ah Li-ion

C

harging Time

...................................................................

3hr

L

ED Qty

........................................................

1 COB + 1 LED

L

ength

........................................................................

190mm

L

umen Outputs

...............................

Side - 400lm/Top - 100lm

O

perating time

.........................................

Side - 3hr/Top - 5hr

N

et Weight

..................................................................

0.22kg

IMPORTANT WARRANTY INFORMATION

The battery fitted to this lamp is considered to be a consumable item and its ability to

accept a charge will reduce over time. We will provide warranty against mechanical

and electrical defect for a period of one year - this

DOES NOT

cover fair wear and

tear. If the battery is not properly charged before first use, or regularly conditioned,

its capacity will diminish. Under these circumstances we will not replace the battery

regardless of whether it is less than one year old.

4. OPERATION

Refer to fig.1

4.1.

Connect the USB lead to the socket on the side of the lamp. Plug USB lead into a

power supply and turn on.

4.2.

When the battery has fully charged the 5 GREEN LEDs on the rear will illuminate.

4.3.

Each LED represents 20% of the charge level.

4.4.

Direct the lens away from your eyes before switching on.

LED318 Series

Issue 1

05/03/19

Original Language Version

© Jack Sealey Limited

Refer to

instruction

manual

fig.1