Seiko 5R66 Manual

Seiko 5R66 Manual

Get Seiko 5R66 PDF manuals and user guides View all Seiko 5R66 manuals
Add to My Manuals
Save this manual to your list of manuals

Seiko 5R66 manual content summary:

  • Seiko 5R66 | Manual - Page 1
    Cal. 5R66, 5R67 INSTRUCTIONS BEDIENUNGSANLEITUNG INSTRUCTIONS ISTRUZIONI INSTRUCCIONES INSTRUÇÕES (P. 3) (S. 33) (P. 63) (P. 93) (P. 127) (P. 157) (187 )
  • Seiko 5R66 | Manual - Page 2
    the proud owner of a Spring Drive Watch. For the best results, please read the instructions in this booklet carefully before using your Spring Drive Watch. Please keep this manual handy for ready reference. Sie sind jetzt stolzer Besitzer einer „Spring Drive"-Uhr. Lesen Sie diese Bedienungsanleitung
  • Seiko 5R66 | Manual - Page 3
    English FEATURES Spring Drive, the unique mechanism made available only by SEIKO technology, ensures high accuracy while using the mainspring as its sole power source. The watch will work continuously for approximately 72 hours (three days) when the mainspring is fully wound. The watch features a
  • Seiko 5R66 | Manual - Page 4
    the mainspring by turning the crown (for Cal. 5R66 & 5R67) 1. Slowly turn the crown clockwise (the 12 o'clock direction) to wind the mainspring. * With manual winding, if you give the crown five full rotations, it provides the power to run the watch for approximately ten hours. * Turning the crown
  • Seiko 5R66 | Manual - Page 5
    move on to time setting, follow the instructions pertaining to the caliber number of your watch. Caliber 5R66 .. Refer to "● How to set the time and date, how to use the time difference adjustment function (for Cal. 5R66)" at the bottom of this page. Caliber 5R67 .. Refer to "● How to set the time
  • Seiko 5R66 | Manual - Page 6
    selected> 1. Pull out the crown to the second click. * Pull the crown out when the second hand is at the 12 o'clock position and the second hand will stop on the spot. * When setting the time, ensure that the watch is working: the mainspring is sufficiently wound. Second click position 11 English
  • Seiko 5R66 | Manual - Page 7
    to indicate "5" on the 24-hour scale (the 2.5 o'clock position), while the minute hand is pointing at the "0" minute wound state. 2. When starting to use a watch after it stops, wind the mainspring sufficiently and not stop the second hand movement for 30 minutes or longer while the crown is
  • Seiko 5R66 | Manual - Page 8
    counterclockwise. • After setting the time, it is necessary to set the date. Manual date adjustment is required on the first day after a month that has less than the date display. If the time difference is correctly adjusted, the watch displays the correct date of the place where you are staying.
  • Seiko 5R66 | Manual - Page 9
    English * Refer to "● Time difference table" for time differences from GMT (UTC). * When adjusting the time difference, make sure that AM/PM and the date are correctly set. * When adjusting the hour hand, the other hands may move slightly. However, this is not a malfunction. * When turning the
  • Seiko 5R66 | Manual - Page 10
    and moon phase (for Cal. 5R67) ● How to set the time • When setting the time, ensure that the watch is working: the main spring is sufficiently wound. 1. Pull out the crown to the second click when the second hand is at the 12 o'clock (0
  • Seiko 5R66 | Manual - Page 11
    second click. 3. Do not stop the second hand movement for 30 minutes or longer while the crown is at the second click newspaper for current moon phase information. * While the hour hand of the watch is between the 9 o'clock and 2 o'clock positions, do not adjust the moon phase. If it is necessary to
  • Seiko 5R66 | Manual - Page 12
    watch from stopping, wind the mainspring to store the excess power that will allow the watch to run for extra time.) Power Reserve Indicator 5R66 5R67 conditions, such as the number of hours you wear the watch or the extent of your movement while wearing it. It is recommended that you observe the
  • Seiko 5R66 | Manual - Page 13
    back, your watch is not water resistant, and care should be taken not to get it wet as water may damage the movement. If the watch becomes wet, we suggest that you have it checked by the retailer from whom the watch was purchased or any member of the SEIKO SPRING DRIVE worldwide service network. 25
  • Seiko 5R66 | Manual - Page 14
    you wear a SEIKO Diver's watch while scuba diving. * Before using a water resistant 5, 10, 15 or 20 bar watch in water, make watch returns to normal temperature. NOTE: Pressure in bar is a test pressure and should not be considered as corresponding to an actual diving depth since swimming movements
  • Seiko 5R66 | Manual - Page 15
    ● Do not leave the watch in close contact with hot spring water. PERIODIC CHECKS ● Inspection and overhaul of the watch will be performed by SEIKO. When you take your watch to the retailer from whom the watch was purchased, make sure that the watch will be serviced by SEIKO. ● We suggest that you
  • Seiko 5R66 | Manual - Page 16
    English TROUBLESHOOTING Trouble Possible causes The watch stops operating. The power supplied by the mainspring has been consumed. Even though you wear the watch every day, the power reserve indicator does not move up. The watch temporarily gains or loses time. The watch is worn on your wrist
  • Seiko 5R66 | Manual - Page 17
    SPECIFICATIONS 1 Features 5R66:Hour hand, Minute hand, Second hand, 24-hour hand, Calendar display, Power Reserve Indicator 5R67:Hour hand, Minute watch power shown by the power reserve indicator. 5 Driving system Spring Drive (Automatic type with manual winding function) 6 Hand movement
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
Cal. 5R66, 5R67
INSTRUCTIONS
(P.
3)
BEDIENUNGSANLEITUNG
(S.
33)
INSTRUCTIONS
(P.
63)
ISTRUZIONI
(P.
93)
INSTRUCCIONES
(P. 127)
INSTRUÇÕES
(P.
157)
(187
)