Sennheiser EW-DX SK Instruction manual and frequently asked questions - Evolut
Sennheiser EW-DX SK Manual
View all Sennheiser EW-DX SK manuals
Add to My Manuals
Save this manual to your list of manuals |
Sennheiser EW-DX SK manual content summary:
- Sennheiser EW-DX SK | Instruction manual and frequently asked questions - Evolut - Page 1
. Alternatively, the HTML instructions are also available in the download area of the product page: www.sennheiser.com/ew-d www.sennheiser.com/ew-dx www.sennheiser.com/ew-dp Sennheiser electronic GmbH & Co. KG Am Labor 1, 30900 Wedemark, Germany, www.sennheiser.com EW-D | EW-DX | EW-DP - v3.0 (04 - Sennheiser EW-DX SK | Instruction manual and frequently asked questions - Evolut - Page 2
PRODUCT INFORMATION „Products of the EW-D series" „Sets available for the EW-D series" „Products of the EW-DX series" „Sets available for the EW-DX series" „Products of the EW-DP series" „Sets available for the EW-DP series" „Accessories" „Frequency ranges" 1 - Sennheiser EW-DX SK | Instruction manual and frequently asked questions - Evolut - Page 3
series For information about the available accessories, see „Accessories". For information about the available sets, see „Sets available for the EW-D series". For information about the frequency ranges, see „Frequency ranges". You can find technical specifications for the series and the individual - Sennheiser EW-DX SK | Instruction manual and frequently asked questions - Evolut - Page 4
EW-D EM rack receiver ► The EW-D EM rack receiver is available in the following versions: EW-D EM (Q1-6) | 470.2 - 526 MHz | Art. no. 508800 EW-D EM (R1-6) | 520 - 576 MHz | Art. no. 508801 EW-D EM (R4-9) | 552 - 607.8 MHz | Art. no. 508802 EW-D EM (S1-7) | 606.2 - 662 MHz | Art. no. 508803 EW-D EM - Sennheiser EW-DX SK | Instruction manual and frequently asked questions - Evolut - Page 5
versions: EW-D SKM-S (Q1-6) | 470.2 - 526 MHz | Art. no. 508790 EW-D SKM-S (R1-6) | 520 - 576 MHz | Art. no. 508791 EW-D SKM-S (R4-9) | 552 - 607.8 MHz | Art. no. 508792 EW-D SKM-S (S1-7) | 606.2 - 662 MHz | Art. no. 508793 EW-D SKM-S (S4-7) | 630 - 662 MHz | Art. no. 508794 EW-D SKM-S (S7-10) | 662 - Sennheiser EW-DX SK | Instruction manual and frequently asked questions - Evolut - Page 6
following versions: EW-D SK (Q1-6) | 470.2 - 526 MHz | Art. no. 508780 EW-D SK (R1-6) | 520 - 576 MHz | Art. no. 508781 EW-D SK (R4-9) | 552 - 607.8 MHz | Art. no. 508782 EW-D SK (S1-7) | 606.2 - 662 MHz | Art. no. 508783 EW-D SK (S4-7) | 630 - 662 MHz | Art. no. 508784 EW-D SK (S7-10) | 662 - 693 - Sennheiser EW-DX SK | Instruction manual and frequently asked questions - Evolut - Page 7
Lavalier Set ► The set consists of the following components: • EW-D EM rack receiver • EW-D SK bodypack transmitter • ME 2 lavalier microphone The set is available in the following versions: EW-D ME2 SET (Q1-6) | 470.2 - 526 MHz | Art. no. 508700 EW-D ME2 SET (R1-6) | 520 - 576 MHz | Art. no. 508701 - Sennheiser EW-DX SK | Instruction manual and frequently asked questions - Evolut - Page 8
| Headmic Set ► The set consists of the following components: • EW-D EM rack receiver • EW-D SK bodypack transmitter • ME 3 headset microphone The set is available in the following versions: EW-D ME3 SET (Q1-6) | 470.2 - 526 MHz | Art. no. 508710 EW-D ME3 SET (R1-6) | 520 - 576 MHz | Art. no. 508711 - Sennheiser EW-DX SK | Instruction manual and frequently asked questions - Evolut - Page 9
Lavalier Set ► The set consists of the following components: • EW-D EM rack receiver • EW-D SK bodypack transmitter • ME 4 lavalier microphone The set is available in the following versions: EW-D ME4 SET (Q1-6) | 470.2 - 526 MHz | Art. no. 508720 EW-D ME4 SET (R1-6) | 520 - 576 MHz | Art. no. 508721 - Sennheiser EW-DX SK | Instruction manual and frequently asked questions - Evolut - Page 10
consists of the following components: • EW-D EM rack receiver • EW-D SK bodypack transmitter • CI 1 instrument cable The set is available in the following versions: EW-D CI1 SET (Q1-6) | 470.2 - 526 MHz | Art. no. 508730 EW-D CI1 SET (R1-6) | 520 - 576 MHz | Art. no. 508731 EW-D CI1 SET (R4-9) | 552 - Sennheiser EW-DX SK | Instruction manual and frequently asked questions - Evolut - Page 11
EW-D EM rack receiver • EW-D SK bodypack transmitter The set is available in the following versions: EW-D SK BASE SET (Q1-6) | 470.2 - 526 MHz | Art. no. 508740 EW-D SK BASE SET (R1-6) | 520 - 576 MHz | Art. no. 508741 EW-D SK BASE SET (R4-9) | 552 - 607.8 MHz | Art. no. 508742 EW-D SK BASE SET (S1 - Sennheiser EW-DX SK | Instruction manual and frequently asked questions - Evolut - Page 12
Set ► The set consists of the following components: • EW-D EM rack receiver • EW-D SKM-S handheld transmitter • MMD 835 microphone module The set is available in the following versions: EW-D 835-S SET (Q1-6) | 470.2 - 526 MHz | Art. no. 508750 EW-D 835-S SET (R1-6) | 520 - 576 MHz | Art. no. 508751 - Sennheiser EW-DX SK | Instruction manual and frequently asked questions - Evolut - Page 13
consists of the following components: • EW-D EM rack receiver • EW-D SKM-S handheld transmitter The set is available in the following versions: EW-D SKM-S BASE SET (Q1-6) | 470.2 - 526 MHz | Art. no. 508760 EW-D SKM-S BASE SET (R1-6) | 520 - 576 MHz | Art. no. 508761 EW-D SKM-S BASE SET (R4-9) | 552 - Sennheiser EW-DX SK | Instruction manual and frequently asked questions - Evolut - Page 14
components: • EW-D EM rack receiver • EW-D SK bodypack transmitter • EW-D SKM-S handheld transmitter • ME 2 lavalier microphone • MMD 835 microphone module The set is available in the following versions: EW-D ME2/835-S SET (Q1-6) | 470.2 - 526 MHz | Art. no. 508770 EW-D ME2/835-S SET (R1-6) | 520 - Sennheiser EW-DX SK | Instruction manual and frequently asked questions - Evolut - Page 15
series For information about the available accessories, see „Accessories". For information about the available sets, see „Sets available for the EW-DX series". For information about the frequency ranges, see „Frequency ranges". You can find technical specifications for the series and the individual - Sennheiser EW-DX SK | Instruction manual and frequently asked questions - Evolut - Page 16
of the EW-DX series EW-DX EM 2 rack receiver ► The EW-DX EM 2 rack receiver is available in the following versions: EW-DX EM 2 (Q1-9) | 470.2 - 550 MHz | Art. no. 509342 EW-DX EM 2 (R1-9) | 520 - 607.8 MHz | Art. no. 509343 EW-DX EM 2 (S1-10) | 606.2 - 693.8 MHz | Art. no. 509344 EW-DX EM 2 (S2-10 - Sennheiser EW-DX SK | Instruction manual and frequently asked questions - Evolut - Page 17
versions: EW-DX SKM (Q1-9) | 470.2 - 550 MHz | Art. no. 509426 EW-DX SKM (R1-9) | 520 - 607.8 MHz | Art. no. 509427 EW-DX SKM (S1-10) | 606.2 - 693.8 MHz | Art. no. 509428 EW-DX SKM (S2-10) | 614.2 - 693.8 MHz | Art. no. 509431 EW-DX SKM (S4-10) | 630 - 693.8 MHz | Art. no. 509432 EW-DX SKM - Sennheiser EW-DX SK | Instruction manual and frequently asked questions - Evolut - Page 18
Products of the EW-DX series EW-DX SKM-S (S2-10) | 614.2 - 693.8 MHz | Art. no. 509417 EW-DX SKM-S (S4-10) | 630 - 693.8 MHz | Art. no. 509418 EW-DX SKM-S (U1/5) | 823.2 - 831.8 MHz & 863.2 - 864.8 MHz | Art. no. 509419 EW-DX SKM-S (V3-4) | 925.2 - 937.3 MHz | Art. no. 509421 EW-DX SKM-S (V5-7) | - Sennheiser EW-DX SK | Instruction manual and frequently asked questions - Evolut - Page 19
following versions: EW-DX SK (Q1-9) | 470.2 - 550 MHz | Art. no. 509384 EW-DX SK (R1-9) | 520 - 607.8 MHz | Art. no. 509385 EW-DX SK (S1-10) | 606.2 - 693.8 MHz | Art. no. 509386 EW-DX SK (S2-10) | 614.2 - 693.8 MHz | Art. no. 509389 EW-DX SK (S4-10) | 630 - 693.8 MHz | Art. no. 509390 EW-DX SK (U1 - Sennheiser EW-DX SK | Instruction manual and frequently asked questions - Evolut - Page 20
of the EW-DX series EW-DX SK 3-PIN (S2-10) | 614.2 - 693.8 MHz | Art. no. 509403 EW-DX SK 3-PIN (S4-10) | 630 - 693.8 MHz | Art. no. 509404 EW-DX SK 3-PIN (U1/5) | 823.2 - 831.8 MHz & 863.2 - 864.8 MHz | Art. no. 509405 EW-DX SK 3-PIN (V3-4) | 925.2 - 937.3 MHz | Art. no. 509407 EW-DX SK 3-PIN - Sennheiser EW-DX SK | Instruction manual and frequently asked questions - Evolut - Page 21
the following components: • EW-DX EM 2 rack receiver • 2x EW-DX SKM-S handheld transmitters • 2x MMD 835 microphone modules • 2x BA 70 rechargeable batteries The set is available in the following versions: EW-DX 835-S SET (Q1-9) | 470.2 - 550 MHz | Art. no. 509300 EW-DX 835-S SET (R1-9) | 520 - 607 - Sennheiser EW-DX SK | Instruction manual and frequently asked questions - Evolut - Page 22
• EW-DX EM 2 rack receiver • 2x EW-DX SK bodypack transmitters • 2x MKE 2 lavalier microphones • 2x BA 70 rechargeable batteries The set is available in the following versions: EW-DX MKE 2 SET (Q1-9) | 470.2 - 550 MHz | Art. no. 509314 EW-DX MKE 2 SET (R1-9) | 520 - 607.8 MHz | Art. no. 509315 EW-DX - Sennheiser EW-DX SK | Instruction manual and frequently asked questions - Evolut - Page 23
: EW-DX MKE 2-835-S SET (Q1-9) | 470.2 - 550 MHz | Art. no. 509328 EW-DX MKE 2-835-S SET (R1-9) | 520 - 607.8 MHz | Art. no. 509329 EW-DX MKE 2-835-S SET (S1-10) | 606.2 - 693.8 MHz | Art. no. 509330 EW-DX MKE 2-835-S SET (S2-10) | 614.2 - 693.8 MHz | Art. no. 509333 EW-DX MKE 2-835-S SET (S4-10 - Sennheiser EW-DX SK | Instruction manual and frequently asked questions - Evolut - Page 24
Sets available for the EW-DX series You can find more detailed information about the set in the following sections: ▷ Startup and operation: „Starting up and operating devices of the Evolution Wireless Digital series" ▷ Specifications: „SPECIFICATIONS" 23 - Sennheiser EW-DX SK | Instruction manual and frequently asked questions - Evolut - Page 25
components: • EW-DX EM 2 rack receiver • 1x EW-DX SK bodypack transmitters • 1x EW-DX SKM-S handheld transmitters • 2x BA 70 rechargeable batteries The set is available in the following versions: EW-DX SK-SKM-S BASE SET (Q1-9) | 470.2 - 550 MHz | Art. no. 509462 EW-DX SK-SKM-S BASE SET (R1-9) | 520 - Sennheiser EW-DX SK | Instruction manual and frequently asked questions - Evolut - Page 26
series For information about the available accessories, see „Accessories". For information about the available sets, see „Sets available for the EW-DP series". For information about the frequency ranges, see „Frequency ranges". You can find technical specifications for the series and the individual - Sennheiser EW-DX SK | Instruction manual and frequently asked questions - Evolut - Page 27
of the EW-DP series EW-DP EK portable receiver ► The EW-DP EK rack receiver is available in the following versions: EW-DP EK (Q1-6) | 470.2 - 526 MHz | Art. no. 700050 EW-DP EK (R1-6) | 520 - 576 MHz | Art. no. 700051 EW-DP EK (R4-9) | 552 - 607.8 MHz | Art. no. 700052 EW-DP EK (S1-7) | 606.2 - 662 - Sennheiser EW-DX SK | Instruction manual and frequently asked questions - Evolut - Page 28
(Q1-6) | 470.2 - 526 MHz | Art. no. 700010 EW-DP ME-2 SET (R1-6) | 520 - 576 MHz | Art. no. 700011 EW-DP ME-2 SET (R4-9) | 552 - 607.8 MHz | Art. no. 700012 EW-DP ME-2 SET (S1-7) | 606.2 - 662 MHz | Art. no. 700013 EW-DP ME-2 SET (S4-7) | 630 - 662 MHz | Art. no. 700014 EW-DP ME-2 SET (S7-10) | 662 - Sennheiser EW-DX SK | Instruction manual and frequently asked questions - Evolut - Page 29
(Q1-6) | 470.2 - 526 MHz | Art. no. 700020 EW-DP ME-4 SET (R1-6) | 520 - 576 MHz | Art. no. 700021 EW-DP ME-4 SET (R4-9) | 552 - 607.8 MHz | Art. no. 700022 EW-DP ME-4 SET (S1-7) | 606.2 - 662 MHz | Art. no. 700023 EW-DP ME-4 SET (S4-7) | 630 - 662 MHz | Art. no. 700024 EW-DP ME-4 SET (S7-10) | 662 - Sennheiser EW-DX SK | Instruction manual and frequently asked questions - Evolut - Page 30
SET (Q1-6) | 470.2 - 526 MHz | Art. no. 700030 EW-DP 835 SET (R1-6) | 520 - 576 MHz | Art. no. 700031 EW-DP 835 SET (R4-9) | 552 - 607.8 MHz | Art. no. 700032 EW-DP 835 SET (S1-7) | 606.2 - 662 MHz | Art. no. 700033 EW-DP 835 SET (S4-7) | 630 - 662 MHz | Art. no. 700034 EW-DP 835 SET (S7-10) | 662 - Sennheiser EW-DX SK | Instruction manual and frequently asked questions - Evolut - Page 31
Assist app You can operate your products easily and intuitively using the EW-D Smart Assist app for iOS and Android. You can make all device settings in the app, as well multi-channel systems with automatic fre- quency setup ▷ Assign names and color labels to wireless links ▷ Get tips and support 30 - Sennheiser EW-DX SK | Instruction manual and frequently asked questions - Evolut - Page 32
Accessories BA 70 rechargeable battery and L 70 USB charger ► BA 70 | Rechargeable battery | Art. no. 508860 L 70 USB | Charger | Art. no. 508861 EW-D CHARGING SET | L 70 USB charger with two BA 70 rechargeable batteries | Art. no. 508862 Startup and operation: „Charging the BA 70 rechargeable - Sennheiser EW-DX SK | Instruction manual and frequently asked questions - Evolut - Page 33
KIT | CHG 70N charger with NT 12-35 CS power supply unit | Art. no. 509456 Startup and operation: „Charging the EW-DX SKM(-S) handheld transmitter, the EW-DX SK (3-PIN) bodypack transmitter or the BA 70 rechargeable battery in the CHG 70N charger" Specifications: „BA 70 rechargeable battery" | „CHG - Sennheiser EW-DX SK | Instruction manual and frequently asked questions - Evolut - Page 34
| 470 - 694 MHz | Art. no. 508879 EW-D ASA CN/ANZ (Q-R-S) | 470 - 694 MHz | Art. no. 508998 EW-D ASA (T-U-V-W) | 694 - 1075 MHz | Art. no. 508880 EW-D ASA (X-Y) | 1350 - 1805 MHz | Art. no. 508881 Startup and operation: „EW-D ASA antenna splitter" Specifications: „EW-D ASA antenna splitter" 33 - Sennheiser EW-DX SK | Instruction manual and frequently asked questions - Evolut - Page 35
(Q) | 470 - 550 MHz | Art. no. 508873 EW-D AB (R) | 520 - 608 MHz | Art. no. 508874 EW-D AB (S) | 606 - 694 MHz | Art. no. 508875 EW-D AB (U) | 823 - 865 MHz | Art. no. 508876 EW-D AB (V) | 902 - 960 MHz | Art. no. 508877 EW-D AB (Y) | 1785 - 1805 MHz | Art. no. 508878 Use: „Information on antenna - Sennheiser EW-DX SK | Instruction manual and frequently asked questions - Evolut - Page 36
Antennas Rod antennas ► Accessories Product versions: Half Wave Dipole (Q) | 470 - 550 MHz | Art. no. 508868 Half Wave Dipole (R) | 520 - 608 MHz | Art. no. 508869 Half Wave Dipole (S) | 606 - 694 MHz | Art. no. 508870 Half Wave Dipole (U) | 823 - 865 MHz | Art. no. 508871 Half Wave Dipole (V) | - Sennheiser EW-DX SK | Instruction manual and frequently asked questions - Evolut - Page 37
AD 1800 passive directional antenna ► Accessories AD 1800 | 1400 - 2400 MHz | Art. no. 504916 Accessories for rack mounting GA 3 rack mount kit 19" rack adapter for mounting the EW-D EM, EW-DX EM 2 or EW-D ASA in a 19" rack. Art. no. 503167 ► 36 - Sennheiser EW-DX SK | Instruction manual and frequently asked questions - Evolut - Page 38
Accessories AM 2 antenna front mount kit Antenna front mount kit for installing antenna connections on the front of the rack when using the EW-D EM, EW-DX EM 2 or EW-D ASA together with the GA 3 rack mount kit. Art. no. 009912 ► 37 - Sennheiser EW-DX SK | Instruction manual and frequently asked questions - Evolut - Page 39
Accessories Mounting accessories for EW-DP EK Mounting kit for attaching the EW-DP EK portable receiver to cameras, cages or sound bags. ▷ Startup and operation: „EW-DP EK portable receiver" Mounting plate (single) | Art. no. 588188 Mounting plate set | Art. no. 700005 38 - Sennheiser EW-DX SK | Instruction manual and frequently asked questions - Evolut - Page 40
camera. ▷ Startup and operation: „EW-DP EK portable receiver" CL 35 | 3.5 mm jack cable | Art no. 586365 CL 35-Y | 3.5 mm Y-cable | Art. no. 700061 CL 35 XLR | 3.5 mm XLR cable | Art. no. 700062 Color Coding Sets EW-D COLOR CODING SET | For EM, SKM-S, SK | Art. no. 508989 EW-D SK COLOR CODING | For - Sennheiser EW-DX SK | Instruction manual and frequently asked questions - Evolut - Page 41
ranges can be found in the download area of the Sennheiser website at: www.sennheiser.com/download ▷ Enter EW-D or EW-DP in the search bar to show the fre- quency tables. EW-D | EW-DP The products EW-D EM, EW-D SKM-S, EW-D SK and EW-DP EK are available in the following frequency ranges: ► 40 - Sennheiser EW-DX SK | Instruction manual and frequently asked questions - Evolut - Page 42
Frequency ranges EW-DX The EW-DX EM 2, EW-DX SKM, EW-DX SKM-S, EW-DX SK and EW-D SK 3-PIN products are available in the following frequency ranges: ► 41 - Sennheiser EW-DX SK | Instruction manual and frequently asked questions - Evolut - Page 43
Frequency ranges Accessories The EW-D AB antenna booster and the Half Wave Dipole rod antennas are available in the following frequency ranges: ► The EW-D ASA antenna splitter is available in the following frequency ranges: ► 42 - Sennheiser EW-DX SK | Instruction manual and frequently asked questions - Evolut - Page 44
INSTRUCTION MANUAL Starting up and operating devices of the Evolution Wireless Digital series Products of the EW-D series ▷ "EW-D EM rack receiver" ▷ "EW-D SKM-S handheld transmitter" ▷ "EW-D SK bodypack transmitter" Products of the EW-DX series ▷ "EW-DX EM 2 rack receiver" ▷ "EW-DX SKM | EW-DX - Sennheiser EW-DX SK | Instruction manual and frequently asked questions - Evolut - Page 45
EW-D EM rack receiver EW-D EM rack receiver Product overview Front 1 LINK and DATA LEDs to indicate connection status and Bluetooth status • See "Meaning of the LEDs" 2 Display for status information and operating menu • See "Displays on the receiver's display panel" 3 UP/DOWN/SET menu buttons for - Sennheiser EW-DX SK | Instruction manual and frequently asked questions - Evolut - Page 46
Back EW-D EM rack receiver 7 Strain relief for the connection cable of the power supply unit • See "Connecting/disconnecting the receiver to/from the power supply system" 8 DC in connection socket for the power supply unit • See "Connecting/disconnecting the receiver to/from the power supply - Sennheiser EW-DX SK | Instruction manual and frequently asked questions - Evolut - Page 47
EW-D EM rack receiver Connecting/disconnecting the receiver to/ from the power supply system Only use the supplied power supply unit. It is designed for your receiver and ensures safe operation. You will f i ndt he po wer suppl y uni t andt he countr y adap-t ers in the packaging under the tray: - Sennheiser EW-DX SK | Instruction manual and frequently asked questions - Evolut - Page 48
EW-D EM rack receiver To completely disconnect the receiver from the power supply system: ▷ Unplug the power supply unit from the wall socket. ▷ Unplug the power supply unit from the DC in socket on the receiver. Connecting antennas Connecting rod antennas To connect the supplied rod antennas: ► ▷ - Sennheiser EW-DX SK | Instruction manual and frequently asked questions - Evolut - Page 49
Connecting remote antennas To connect remote antennas: ► EW-D EM rack receiver ▷ Connect the antennas to the two antenna inputs on the receiver as shown in the figure. ▷ Observe the specified minimum spacing. *Recommended antennas: • ADP UHF | 470 - 1075 MHz • AD 1800 | 1400 - 2400 MHz If you are - Sennheiser EW-DX SK | Instruction manual and frequently asked questions - Evolut - Page 50
EW-D EM rack receiver Outputting audio signals The EW-D EM has a balanced XLR-3M output socket and an unbalanced 6.3 mm jack output socket. ▷ Always use only one of the two output sockets. To connect an XLR cable: ▷ Plug the XLR cable into the AF out Bal socket on the EW-D EM. To connect a jack - Sennheiser EW-DX SK | Instruction manual and frequently asked questions - Evolut - Page 51
EW-D EM rack receiver Installing receivers in a rack Observe the following instructions when mounting the receiver in a rack. The mounting brackets for installing the receiver in the rack can be found in the packaging under the tray: Rack mount angles Power supply adapters Power supply unit CAUTION! - Sennheiser EW-DX SK | Instruction manual and frequently asked questions - Evolut - Page 52
EW-D EM rack receiver Mounting a single receiver in a rack ▷ Connect the mounting brackets to the sides of the receiver as shown. ▷ Attach the front panel as shown. ▷ If desired, attach the antennas to the front panel as shown. This requires the optional AM 2 antenna - Sennheiser EW-DX SK | Instruction manual and frequently asked questions - Evolut - Page 53
EW-D EM rack receiver Mounting two receivers side by side in a rack ▷ Place both receivers upside down and side by side on an even surface. ▷ Tighten the jointing plate as shown. ▷ Attach the mounting brackets as shown. 52 - Sennheiser EW-DX SK | Instruction manual and frequently asked questions - Evolut - Page 54
EW-D EM rack receiver Switching the receiver on and off To switch the receiver on: ▷ Short-press the ON/OFF button. The receiver switches on. To switch the receiver to standby mode: ▷ If necessary, deactivate the lock-off function (see "Lock-off function"). ▷ Hold down the ON/OFF button until the - Sennheiser EW-DX SK | Instruction manual and frequently asked questions - Evolut - Page 55
EW-D EM rack receiver Lock-off function To activate the key lock: ▷ Press the UP and DOWN buttons simultaneously. Key lock is activated and the lock icon is shown - Sennheiser EW-DX SK | Instruction manual and frequently asked questions - Evolut - Page 56
Meaning of the LEDs EW-D EM rack receiver The LINK and DATA LEDs on the front of the receiver can indicate the following information. LINK LED The LINK LED provides information about the status of the radio link between the transmitter and receiver, as well as status information for the paired - Sennheiser EW-DX SK | Instruction manual and frequently asked questions - Evolut - Page 57
EW-D EM rack receiver The LED is continuously red: ▷ No link between the transmitter and receiver. The LED is flashing red: ▷ The link between the transmitter and receiver is estab- lished. ▷ The battery/rechargeable battery in the paired transmitter is low. DATA LED The DATA LED provides - Sennheiser EW-DX SK | Instruction manual and frequently asked questions - Evolut - Page 58
EW-D EM rack receiver Displays on the receiver's display panel Status information such as frequency, reception Further information Antenna switching diversity / radio level: "Establishing a radio link | Synchronizing the receiver and transmitter" Mute / mute lock: "MUTE LOCK menu item" | "Muting the - Sennheiser EW-DX SK | Instruction manual and frequently asked questions - Evolut - Page 59
EW-D EM rack receiver Frequency: "AUTO SCAN menu item" | "CHANNEL menu item" | "TUNE menu item" Connecting to the app: "EW-D Smart Assist app" Lock-off function: "Lock-off function" Menu: "Making settings in the menu" Transmitter battery: SKM-S -> "Inserting and removing the batteries/rechargeable - Sennheiser EW-DX SK | Instruction manual and frequently asked questions - Evolut - Page 60
EW-D EM rack receiver Making settings in the menu Buttons for navigating the menu Use the following buttons to navigate through the receiver's operating menu. ► Press the SET button • Open the menu • Save settings in a menu item Press the UP or DOWN button • Changes to the previous or - Sennheiser EW-DX SK | Instruction manual and frequently asked questions - Evolut - Page 61
EW-D EM rack receiver Opening the menu and navigating the menu items To open the menu: ▷ Press the SET button. The first menu item GAIN flashes. ► To navigate the - Sennheiser EW-DX SK | Instruction manual and frequently asked questions - Evolut - Page 62
EW-D EM rack receiver GAIN menu item Under the GAIN menu item, you can set the level of the audio signal coming from the coupled transmitter (e.g. vocals via EW-D SKM-S or guitar via EW-D SK). ▷ Open the GAIN menu item. The item flashes on the display as follows. ► ▷ Press the UP or DOWN button to - Sennheiser EW-DX SK | Instruction manual and frequently asked questions - Evolut - Page 63
EW-D EM rack receiver ► ▷ Press the UP or DOWN button to adjust the value. Make sure audio signal arriving at a device leaves the device with the same level. Example: If you are using an EW-D wireless link instead of a guitar cable, with unity gain settings, the volume of the guitar in the guitar - Sennheiser EW-DX SK | Instruction manual and frequently asked questions - Evolut - Page 64
ter's mute switch is disabled. ► EW-D EM rack receiver ▷ Press the SET button to save the set value. AUTO SCAN unchanged. If you have set a new frequency, you must still synchronize the receiver with the transmitter to establish the radio link (see "Establishing a radio link | Synchronizing the - Sennheiser EW-DX SK | Instruction manual and frequently asked questions - Evolut - Page 65
EW-D EM rack receiver CHANNEL menu item Under the CHANNEL menu item, you can set the radio frequency remains unchanged. If you have set a new frequency, you must still synchronize the receiver with the transmitter to establish the radio link (see "Establishing a radio link | Synchronizing the - Sennheiser EW-DX SK | Instruction manual and frequently asked questions - Evolut - Page 66
EW-D EM rack receiver TUNE menu item Under the TUNE menu item, you can manually set the radio frequency independently of the preset you have set a new frequency, you must still synchronize the receiver with the transmitter to establish the radio link (see "Establishing a radio link | Synchronizing - Sennheiser EW-DX SK | Instruction manual and frequently asked questions - Evolut - Page 67
EW-D EM rack receiver RESET menu item Under the RESET menu item, you can reset the receiver to its factory settings. ▷ Open the RESET menu item. The item flashes on the display as follows. ► ▷ Press the UP or DOWN button to switch between the options YES and NO. ► YES: The receiver is reset to its - Sennheiser EW-DX SK | Instruction manual and frequently asked questions - Evolut - Page 68
EW-D EM rack receiver Using EW-D Color Coding Sets to label transmission paths You can use the EW-D Color Coding Sets (see "Color Coding Sets") to identify which transmitters belong to which receivers. This makes it easier to match up the individual devices, especially in multi-channel systems. You - Sennheiser EW-DX SK | Instruction manual and frequently asked questions - Evolut - Page 69
-D SKM-S handheld transmitter EW-D SKM-S handheld transmitter Product overview ► 1 ON/OFF button • See "Switching the handheld transmitter on and off" 2 DATA LED • See "Meaning of the LEDs" 3 SYNC button • See "Establishing a radio link | Synchronizing the receiver and transmitter" 4 LINK LED • See - Sennheiser EW-DX SK | Instruction manual and frequently asked questions - Evolut - Page 70
EW-D SKM-S handheld transmitter Inserting and removing the batteries/rechargeable batteries You can operate the handheld transmitter either with batteries (AA, 1.5 V) or with the rechargeable Sennheiser BA 70 battery. ▷ Unscrew the microphone housing as shown in the figure and pull it down as far as - Sennheiser EW-DX SK | Instruction manual and frequently asked questions - Evolut - Page 71
EW-D SKM-S handheld transmitter Replacing the microphone module To replace the microphone module: ▷ Unscrew the microphone module. ▷ Screw the desired microphone module on. ▷ Do not touch - Sennheiser EW-DX SK | Instruction manual and frequently asked questions - Evolut - Page 72
EW-D SKM-S handheld transmitter • MMD 945-1 | Dynamic microphone module with super-cardioid pick-up pattern • MMK 965-1 | Condenser microphone module with selectable pattern: cardioid and super- - Sennheiser EW-DX SK | Instruction manual and frequently asked questions - Evolut - Page 73
-D Color Coding Sets to label transmission paths You can use the EW-D Color Coding Sets (see "Color Coding Sets") to identify which transmitters belong to which receivers. This makes it easier to match up the individual devices, especially in multi-channel systems. You can also assign colors to the - Sennheiser EW-DX SK | Instruction manual and frequently asked questions - Evolut - Page 74
EW-D SKM-S handheld transmitter Switching the handheld transmitter on and off To switch the handheld transmitter on: ▷ Short-press the ON/OFF button. The LINK LED - Sennheiser EW-DX SK | Instruction manual and frequently asked questions - Evolut - Page 75
EW-D SKM-S handheld transmitter Checking the battery status of the transmitter (Check function) To check the battery status of rechargeable battery. ► Pressing the transmitter's ON/OFF button will simultaneously trigger the Identify function: "Identifying the paired receiver (Identify function)". 74 - Sennheiser EW-DX SK | Instruction manual and frequently asked questions - Evolut - Page 76
EW-D SKM-S handheld transmitter Identifying the paired receiver (Identify function) In multi-channel systems, you can use the Check function to quickly identify to which receiver the transmitter is paired. Both the transmitter and receiver must be switched on. ▷ Short-press the ON/OFF button on the - Sennheiser EW-DX SK | Instruction manual and frequently asked questions - Evolut - Page 77
EW-D SKM-S handheld transmitter Meaning of the LEDs The LINK and DATA LEDs on the bottom of the transmitter can indicate the following information. LINK LED The LINK LED provides information about the status of the radio link between the transmitter and receiver, as well as status information for - Sennheiser EW-DX SK | Instruction manual and frequently asked questions - Evolut - Page 78
EW-D SKM-S handheld transmitter The LED is continuously red: ▷ The (rechargeable) battery in the transmitter is dead. The LED is flashing red: ▷ The link between the transmitter and receiver is estab- lished. ▷ The battery/rechargeable battery in the transmitter is low. The LED is off: ▷ No link - Sennheiser EW-DX SK | Instruction manual and frequently asked questions - Evolut - Page 79
the receiver and transmitter". Conditions and restrictions for using frequencies There may be special conditions and restrictions for using frequencies in your country. Before putting the product into operation, find the information for your country at the following address: www.sennheiser.com - Sennheiser EW-DX SK | Instruction manual and frequently asked questions - Evolut - Page 80
EW-D SKM-S handheld transmitter Muting the handheld transmitter You can mute the audio signal using the mute switch. ► ▷ Slide the mute switch to the desired position to mute or activate the audio signal. You can disable the mute switch by activating the MUTE LOCK option on the receiver (see "MUTE - Sennheiser EW-DX SK | Instruction manual and frequently asked questions - Evolut - Page 81
bodypack transmitter EW-D SK bodypack transmitter Product overview ► 1 SYNC button • See "Establishing a radio link | Synchronizing the receiver and transmitter" 2 DATA LED • See "Meaning of the LEDs" 3 LINK LED • See "Meaning of the LEDs" 4 Mute switch • See "Muting the bodypack transmitter" 5 ON - Sennheiser EW-DX SK | Instruction manual and frequently asked questions - Evolut - Page 82
EW-D SK bodypack transmitter Inserting and removing the batteries/rechargeable batteries You can operate the bodypack transmitter either with batteries (AA, 1.5 V) or with the rechargeable Sennheiser BA 70 battery. ▷ Press the two catches and open the battery compartment cover. ▷ Insert the - Sennheiser EW-DX SK | Instruction manual and frequently asked questions - Evolut - Page 83
EW-D SK bodypack transmitter Connecting a microphone to the bodypack transmitter To connect a microphone to the bodypack transmitter: ▷ Insert the cable's 3.5 mm jack plug into the socket - Sennheiser EW-DX SK | Instruction manual and frequently asked questions - Evolut - Page 84
EW-D SK bodypack transmitter Headset microphones: • ME 3 | Headset microphone with cardioid pattern (models from 2021 and later with gold-plated plug*) • HSP Essential Omni | Headset microphone - Sennheiser EW-DX SK | Instruction manual and frequently asked questions - Evolut - Page 85
EW-D SK bodypack transmitter Connecting an instrument or line source to the plug on a lockable 3.5 mm jack plug) or CL 2 (XLR-3F plug on a lockable 3.5 mm jack plug) Sennheiser cables. To connect an instrument or line source to bodypack transmitter: ▷ Insert the cable's 3.5 mm jack plug into the - Sennheiser EW-DX SK | Instruction manual and frequently asked questions - Evolut - Page 86
-D Color Coding Sets to label transmission paths You can use the EW-D Color Coding Sets (see "Color Coding Sets") to identify which transmitters belong to which receivers. This makes it easier to match up the individual devices, especially in multi-channel systems. You can also assign colors to the - Sennheiser EW-DX SK | Instruction manual and frequently asked questions - Evolut - Page 87
EW-D SK bodypack transmitter Changing the belt clip You can change the belt clip on the bodypack transmitter or flip it over depending on how you - Sennheiser EW-DX SK | Instruction manual and frequently asked questions - Evolut - Page 88
EW-D SK bodypack transmitter Switching the bodypack transmitter on and off To switch the bodypack transmitter on: ▷ Short-press the ON/OFF button. The LINK LED - Sennheiser EW-DX SK | Instruction manual and frequently asked questions - Evolut - Page 89
EW-D SK bodypack transmitter Checking the battery status of the transmitter (Check function) To check the battery status of rechargeable battery. ► Pressing the transmitter's ON/OFF button will simultaneously trigger the Identify function: "Identifying the paired receiver (Identify function)". 88 - Sennheiser EW-DX SK | Instruction manual and frequently asked questions - Evolut - Page 90
EW-D SK bodypack transmitter Identifying the paired receiver (Identify function) In multi-channel systems, you can use the Check function to quickly identify to which receiver the transmitter is paired. Both the transmitter and receiver must be switched on. ▷ Short-press the ON/OFF button on the - Sennheiser EW-DX SK | Instruction manual and frequently asked questions - Evolut - Page 91
EW-D SK bodypack transmitter Meaning of the LEDs The LINK and DATA LEDs on the top of the transmitter can indicate the following information. LINK LED The LINK LED provides information about the status of the radio link between the transmitter and receiver, as well as status information for the - Sennheiser EW-DX SK | Instruction manual and frequently asked questions - Evolut - Page 92
EW-D SK bodypack transmitter The LED is continuously red: ▷ The (rechargeable) battery in the transmitter is dead. The LED is flashing red: ▷ The link between the transmitter and receiver is estab- lished. ▷ The battery/rechargeable battery in the transmitter is low. The LED is off: ▷ No link - Sennheiser EW-DX SK | Instruction manual and frequently asked questions - Evolut - Page 93
the receiver and transmitter". Conditions and restrictions for using frequencies There may be special conditions and restrictions for using frequencies in your country. Before putting the product into operation, find the information for your country at the following address: www.sennheiser.com - Sennheiser EW-DX SK | Instruction manual and frequently asked questions - Evolut - Page 94
EW-D SK bodypack transmitter Muting the bodypack transmitter You can mute the audio signal using the mute switch. ► ▷ Slide the mute switch to the desired position to mute or activate the audio signal. You can disable the mute switch by activating the MUTE LOCK option on the receiver (see "MUTE LOCK - Sennheiser EW-DX SK | Instruction manual and frequently asked questions - Evolut - Page 95
EW-DX EM 2 rack receiver EW-DX EM 2 rack receiver Product overview Front 1 Headphone socket • See " • See "Meaning of the LEDs" 4 CH 1 button for selecting channel 1 • See "Displays on the receiver's display panel" • See "Buttons for navigating the menu" 5 CH 2 LED to indicate the status of channel - Sennheiser EW-DX SK | Instruction manual and frequently asked questions - Evolut - Page 96
EW-DX EM 2 rack receiver 8 Jog dial (UP/DOWN/SET) for navigating the operating menu • See "Buttons for navigating the menu" 9 ESC button for canceling an action in the menu • See "Buttons for navigating the menu" 10 SYNC button for synchronizing the transmitter and receiver • See "Establishing a - Sennheiser EW-DX SK | Instruction manual and frequently asked questions - Evolut - Page 97
EW-DX EM 2 rack receiver 15 XLR-3 socket for AF out Balanced audio output for channel 2 Strain relief for the connection cable of the power supply unit • See "Connecting/disconnecting the receiver to/from the power supply system" 19 DC in connection socket for the power supply unit • See - Sennheiser EW-DX SK | Instruction manual and frequently asked questions - Evolut - Page 98
EW-DX EM 2 rack receiver Connecting/disconnecting the receiver to/ from the power supply system You can operate the receiver using either the included power supply unit or with Power over Ethernet (PoE IEEE 802.3af Class 0). Please refer to the following information. Power from - Sennheiser EW-DX SK | Instruction manual and frequently asked questions - Evolut - Page 99
EW-DX EM 2 rack receiver To completely disconnect the receiver from the power supply system: ▷ Unplug the power supply unit from the wall socket. ▷ Unplug the power supply unit from the DC in socket on the receiver. 98 - Sennheiser EW-DX SK | Instruction manual and frequently asked questions - Evolut - Page 100
EW-DX EM 2 rack receiver Power over Ethernet (PoE) The receiver can be powered via Power over Ethernet (PoE IEEE 802.3af Class 0). ▷ Connect the receiver to a PoE-enabled network switch. 99 - Sennheiser EW-DX SK | Instruction manual and frequently asked questions - Evolut - Page 101
EW-DX EM 2 rack receiver Connecting receivers in a network You can monitor and control one or more receivers via a network connection using the Sennheiser Wireless Systems Manager (WSM) or Sennheiser Control Cockpit (SCC) software. The network does not have to be a homogeneous network including only - Sennheiser EW-DX SK | Instruction manual and frequently asked questions - Evolut - Page 102
EW-DX EM 2 rack receiver Connecting antennas Connecting rod antennas To connect the supplied rod antennas: ► ▷ Connect the antennas to the two antenna inputs on the receiver as shown in the figure. ▷ Slightly angle the antennas to the left and right as shown in the figure. If you are using more than - Sennheiser EW-DX SK | Instruction manual and frequently asked questions - Evolut - Page 103
EW-DX EM 2 rack receiver Connecting remote antennas To connect remote antennas: ► ▷ Connect the antennas to the two antenna inputs on the receiver as shown in the figure. ▷ Observe the specified minimum spacing. *Recommended antennas: • ADP UHF | 470 - 1075 MHz • AD 1800 | 1400 - 2400 MHz If you are - Sennheiser EW-DX SK | Instruction manual and frequently asked questions - Evolut - Page 104
EW-DX EM 2 rack receiver Outputting audio signals Each of the two channels on the EW-DX EM 2 has both a balanced XLR-3M output socket and into the AF out Balanced socket for the respective channel on the EW-DX EM 2. To connect a jack cable: ▷ Plug the jack cable into the AF out Unbalanced socket - Sennheiser EW-DX SK | Instruction manual and frequently asked questions - Evolut - Page 105
EW-DX EM 2 rack receiver Installing receivers in a rack Observe the following instructions when mounting the receiver in a rack. The mounting brackets for installing the receiver in the rack can be found in the packaging under the tray: Rack mount angles Power supply adapters Power supply unit - Sennheiser EW-DX SK | Instruction manual and frequently asked questions - Evolut - Page 106
EW-DX EM 2 rack receiver Mounting a single receiver in a rack ▷ Connect the mounting brackets to the sides of the receiver as shown. ▷ Attach the front panel as shown. ▷ If desired, attach the antennas to the front panel as shown. This requires the optional AM 2 antenna - Sennheiser EW-DX SK | Instruction manual and frequently asked questions - Evolut - Page 107
EW-DX EM 2 rack receiver Mounting two receivers side by side in a rack ▷ Place both receivers upside down and side by side on an even surface. ▷ Tighten the jointing plate as shown. ▷ Attach the mounting brackets as shown. 106 - Sennheiser EW-DX SK | Instruction manual and frequently asked questions - Evolut - Page 108
EW-DX EM 2 rack receiver Switching the receiver on and off To switch the receiver on: ▷ Short-press the ON/OFF button. The receiver switches on. To switch the receiver to standby mode: ▷ Hold down the ON/OFF button until the display switches off. To switch the receiver off completely: ▷ Disconnect - Sennheiser EW-DX SK | Instruction manual and frequently asked questions - Evolut - Page 109
EW-DX EM 2 rack receiver Using the headphone output You can use the headphone output on the front of the receiver (6.3 mm jack) to listen to the audio signals of the two channels. CAUTION Danger due to high volume levels Volume levels that are too high - Sennheiser EW-DX SK | Instruction manual and frequently asked questions - Evolut - Page 110
Meaning of the LEDs EW-DX EM 2 rack receiver The two LEDs on the front of the receiver indicate the following information for channel 1 and channel 2. The LED is green: ▷ The link between the transmitter and receiving channel is established. ▷ The audio signal is active. The LED is yellow: ▷ The - Sennheiser EW-DX SK | Instruction manual and frequently asked questions - Evolut - Page 111
EW-DX EM 2 rack receiver The LED is flashing red: ▷ The link between the transmitter and receiving channel is established. ▷ The battery/rechargeable battery in the paired transmitter is low. The LED is flashing blue: ▷ The Bluetooth Low Energy link is being established be- tween the receiver and a - Sennheiser EW-DX SK | Instruction manual and frequently asked questions - Evolut - Page 112
EW-DX EM 2 rack receiver Displays on the receiver's display panel Status information such as frequency, reception quality, battery status and audio level is shown on the display. The display also shows the operating - Sennheiser EW-DX SK | Instruction manual and frequently asked questions - Evolut - Page 113
EW-DX EM 2 rack receiver Radio frequency level: Displays the RF signal strength name: You can assign a name to the radio link in the receiver menu (see "Ch 1 / Ch 2 -> Name menu item"). Frequency: You can set the frequency of the radio link manually or using the Auto-Setup function. • See "Ch 1 / - Sennheiser EW-DX SK | Instruction manual and frequently asked questions - Evolut - Page 114
Mute mode: EW-DX EM 2 rack receiver The mute switch is deactivated on the received transmitter. The mute switch on the received transmitter is set to AF Mute and the audio signal is muted. ▷ EW-DX SKM-S: "Configuring mute mode and muting the handheld transmitter (EW-DX SKM-S only)" ▷ EW-DX SK: " - Sennheiser EW-DX SK | Instruction manual and frequently asked questions - Evolut - Page 115
EW-DX EM 2 rack receiver System icons: The LD icon is displayed when Link Density mode is activated. See "System -> Link Density menu item". The network icon appears when a network connection is successfully established. See "Connecting receivers in a network". The shield icon is displayed when AES - Sennheiser EW-DX SK | Instruction manual and frequently asked questions - Evolut - Page 116
Channel 1 EW-DX EM 2 rack receiver ▷ On the receiver's home screen, press the CH 1 button. The home screen for channel 1 ▷ Turn the jog dial to the right to view more information about the received transmitter. ▷ Turn the jog dial further to the right to mute or unmute the channel's audio signal. - Sennheiser EW-DX SK | Instruction manual and frequently asked questions - Evolut - Page 117
EW-DX EM 2 rack receiver ▷ Press the jog dial to confirm your selection. Channel 2 ▷ On the receiver's home screen, press the CH 2 button. The home screen for channel 2 appears. You can view and configure the same information as for channel 1. 116 - Sennheiser EW-DX SK | Instruction manual and frequently asked questions - Evolut - Page 118
EW-DX EM 2 rack receiver Buttons for navigating the menu Use the following buttons to navigate through the receiver's operating menu. ► Press the jog dial • Jumps from the home screen to the operating menu • Calls up a menu item • Changes to a submenu • Saves settings ► Turn - Sennheiser EW-DX SK | Instruction manual and frequently asked questions - Evolut - Page 119
EW-DX EM 2 rack receiver ► Press the ESC button • Cancels the entry and returns to the previous display Opening the menu and navigating the menu items To open the menu: ▷ - Sennheiser EW-DX SK | Instruction manual and frequently asked questions - Evolut - Page 120
EW-DX EM 2 rack receiver Menu structure The figure shows the complete menu structure in an overview. Version: firmware 1.1.3 119 - Sennheiser EW-DX SK | Instruction manual and frequently asked questions - Evolut - Page 121
EW-DX EM 2 rack receiver Setting options in the menu In the receiver menu, you can configure the following settings. Changing the name of the radio link ▷ "Ch 1 / Ch 2 -> Name menu item" Adjusting frequencies ▷ "Ch 1 / Ch 2 -> Frequency menu - Sennheiser EW-DX SK | Instruction manual and frequently asked questions - Evolut - Page 122
EW-DX EM 2 rack receiver Enabling the transmitter's automatic lock-off function ▷ "Ch 1 / Ch 2 -> Auto Lock menu item" Configuring the behavior of the transmitter's LEDs ▷ "Ch 1 / Ch 2 -> LED menu item" - Sennheiser EW-DX SK | Instruction manual and frequently asked questions - Evolut - Page 123
EW-DX EM 2 rack receiver Ch 1 / Ch 2 -> Name menu item In the Name menu item, you can define the name of the link for the channel in question. This name is the name of the radio link between the transmitter and receiving channel. You can set the name of the receiver as it will appear in a network - Sennheiser EW-DX SK | Instruction manual and frequently asked questions - Evolut - Page 124
EW-DX EM 2 rack receiver Ch 1 / Ch 2 -> Frequency menu item In the Frequency menu item, you can adjust the frequency for the channel in question. You can select a frequency from the predefined list or set the frequency manually. To open the Frequency menu item: ▷ In the menu, navigate to the - Sennheiser EW-DX SK | Instruction manual and frequently asked questions - Evolut - Page 125
EW-DX EM 2 rack receiver Selecting a frequency from a predefined list To select a frequency from a using the Wireless Systems Manager (WSM) software and upload it to the receiver. For more information on the WSM software, see: www.sennheiser.com/wsm ▷ Press the jog dial to confirm your selection. ▷ - Sennheiser EW-DX SK | Instruction manual and frequently asked questions - Evolut - Page 126
EW-DX EM 2 rack receiver Setting the frequency manually To set the frequency manually: ▷ Open the Frequency subitem. ▷ Turn the jog dial to set the MHz range for the frequency. ▷ Press the jog dial to confirm your selection. ▷ Turn - Sennheiser EW-DX SK | Instruction manual and frequently asked questions - Evolut - Page 127
EW-DX EM 2 rack receiver Ch 1 / Ch 2 -> Gain menu item Under the Gain menu item, you can set the audio level of the audio signal coming from the received transmitter (e.g. vocals or speech via EW-DX SKM or guitar via EW-DX SK). • Setting range: 3 dB to +42 dB in increments of 3 dB To open the Gain - Sennheiser EW-DX SK | Instruction manual and frequently asked questions - Evolut - Page 128
EW-DX EM 2 rack receiver Ch 1 / Ch 2 -> AF Out menu item In the AF Out menu item, you can set the audio level that is output via the audio outputs of the particular receiving channel. To open the AF Out menu item: ▷ In the menu, navigate to the AF Out menu item for the de- sired channel - Sennheiser EW-DX SK | Instruction manual and frequently asked questions - Evolut - Page 129
EW-DX EM 2 rack receiver Ch 1 / Ch 2 -> Trim menu item In the Trim menu item, you can adjust the audio level of the received transmitter to input signals of different volumes. For example, if you are using multiple transmitters in alternation for a single receiving channel, you can adjust the - Sennheiser EW-DX SK | Instruction manual and frequently asked questions - Evolut - Page 130
EW-DX EM 2 rack receiver Ch 1 / Ch 2 -> Low Cut menu item In the Low Cut menu item, you can set the value of the low cut filter for the respective channel. • Setting range: • for EW-DX SK | EW-DX SK 3-PIN: Off, 30 Hz, 60 Hz, 80 Hz, 100 Hz, 120 Hz • for EW-DX SKM | EW-DX SKM-S: 60 Hz, 80 Hz, 100 - Sennheiser EW-DX SK | Instruction manual and frequently asked questions - Evolut - Page 131
EW-DX EM 2 rack receiver Ch 1 / Ch 2 -> Cable Emul. menu item In the Cable Emul. menu item, you can emulate instrument cable lengths: • Setting range: Off, Type 1, Type 2, Type 3 To - Sennheiser EW-DX SK | Instruction manual and frequently asked questions - Evolut - Page 132
EW-DX EM 2 rack receiver Ch 1 / Ch 2 -> Mute Mode menu item In the Mute Mode menu item, you can set the function of the mute switch on the connected transmitter (EW-DX SK, EW-DX SK 3-PIN, EW-DX SKM-S). • Setting range: • Disabled: The mute switch has no function. • RF Mute: The RF signal is - Sennheiser EW-DX SK | Instruction manual and frequently asked questions - Evolut - Page 133
EW-DX EM 2 rack receiver Ch 1 / Ch 2 -> Auto Lock menu item In the Auto Lock menu item, you can activate or deactivate the lock-off for the received transmitter. The lock-off prevents the transmitter from being unintentionally switched off and also prevents any changes to the transmitter's menu. If - Sennheiser EW-DX SK | Instruction manual and frequently asked questions - Evolut - Page 134
EW-DX EM 2 rack receiver Ch 1 / Ch 2 -> LED menu item The LED menu item allows you to set the behavior of the LINK LED on the received transmitter. • Setting range: • ON: The LINK LED remains continuously lit. • OFF: The LINK LED switches off while the lock-off func- tion is active. For - Sennheiser EW-DX SK | Instruction manual and frequently asked questions - Evolut - Page 135
EW-DX EM 2 rack receiver Ch 1 / Ch 2 -> Sync Parameters menu item In the Sync Parameters menu item, you can choose which settings for the transmitter you want to transfer from the receiver to the transmitter during the synchronization. All of the settings can also be set separately in the menu on - Sennheiser EW-DX SK | Instruction manual and frequently asked questions - Evolut - Page 136
EW-DX EM 2 rack receiver ▷ For each option, select whether it will be synchronized or not. The value set for this function will be transferred during synchronization. The value set for this function will not be transferred during synchronization. ▷ Press the jog dial to save your setting. 135 - Sennheiser EW-DX SK | Instruction manual and frequently asked questions - Evolut - Page 137
EW-DX EM 2 rack receiver Ch 1 / Ch 2 -> Scan / Auto Setup menu item The receiver lets you scan the frequency spectrum and display all of the free frequencies in the selected frequency range. The automatic frequency setup can be used to distribute the free frequencies to all of the EW-DX EM 2 devices - Sennheiser EW-DX SK | Instruction manual and frequently asked questions - Evolut - Page 138
EW-DX EM 2 rack receiver ▷ Press the jog dial to open your selected option. ▷ Select a assign the free frequencies to the receiving channels. or ▷ Press the ESC key to cancel and not assign new frequencies. ▷ Next, synchronize the receiving channels with the corresponding transmitters to establish - Sennheiser EW-DX SK | Instruction manual and frequently asked questions - Evolut - Page 139
EW-DX EM 2 rack receiver Ch 1 / Ch 2 -> TX Software menu item The TX Software menu item displays the software version of the received settings that will affect the entire device and not only the respective receiving channel. The following menu items are available: Encryption This menu item - Sennheiser EW-DX SK | Instruction manual and frequently asked questions - Evolut - Page 140
EW-DX EM 2 rack receiver Network In this menu item, you can configure the settings for the network TX Update menu item" Auto Setup This menu item allows you to activate automatic frequency setup for the receiver. ▷ "System -> Auto Setup menu item" This Device This menu item allows you to enter a - Sennheiser EW-DX SK | Instruction manual and frequently asked questions - Evolut - Page 141
EW-DX EM 2 rack receiver System -> Encryption menu item You can secure the radio link between the transmitter and receiver using AES 256 encryption. To open the Encryption menu item: ▷ In the System menu, navigate to the Encryption menu item. ▷ Press the jog dial to - Sennheiser EW-DX SK | Instruction manual and frequently asked questions - Evolut - Page 142
EW-DX EM 2 rack receiver System -> Link Density menu item Link Density mode (LD mode) LD mode doubles the number of usable carrier frequencies in the between the On and Off options. ▷ Press the jog dial to save your setting. ▷ If you have enabled LD mode, the receiver must be restart- ed. 141 - Sennheiser EW-DX SK | Instruction manual and frequently asked questions - Evolut - Page 143
EW-DX EM 2 rack receiver ▷ Press the jog dial to restart the receiver. or ▷ Press the ESC button to cancel the mode change. After enabling LD mode and restarting the receiver, the connected transmitter must be resynchronized with the receiver to enable LD mode on the transmitter as well. 142 - Sennheiser EW-DX SK | Instruction manual and frequently asked questions - Evolut - Page 144
EW-DX EM 2 rack receiver System -> Network menu item In this menu item, you can make the following settings here: Mode • Auto: The network configuration is performed automatical- ly. • Manual: The network configuration can be performed man- ually. mDNS You can enable or disable this option if - Sennheiser EW-DX SK | Instruction manual and frequently asked questions - Evolut - Page 145
EW-DX EM 2 rack receiver IP • If the Mode option is set to Auto, the automatically as- signed IP address is displayed here. • If the Mode option is set to Manual, you can set the IP ad- dress here. Netmask • If the Mode option is set to Auto, the automatically as- signed netmask is displayed here. • - Sennheiser EW-DX SK | Instruction manual and frequently asked questions - Evolut - Page 146
EW-DX EM 2 rack receiver System -> TX Update menu item This menu item lets you perform a firmware update for the transmitters. This update is recommended after you perform a firmware update for the receiver (see "Updating the firmware of the receiver"). The firmware versions currently installed on - Sennheiser EW-DX SK | Instruction manual and frequently asked questions - Evolut - Page 147
EW-DX EM 2 rack receiver shows the remaining time. The system carries out the firmware update for the transmitter. The progress of the update is shown on the receiver's display. The transmitter's display shows that the firmware update is in progress. ATTENTION Canceling the update can impair the - Sennheiser EW-DX SK | Instruction manual and frequently asked questions - Evolut - Page 148
EW-DX EM 2 rack receiver System -> Auto Setup menu item In this menu item, you can activate the Auto Setup function for the receiver. If the function is activated here, you can perform an automatic frequency setup for both channels of this receiver via the Scan / Auto Setup menu item. See "Ch 1 / Ch - Sennheiser EW-DX SK | Instruction manual and frequently asked questions - Evolut - Page 149
EW-DX EM 2 rack receiver System -> This Device menu item This menu item allows you to change the device name, view software and hardware information, or reset the device to - Sennheiser EW-DX SK | Instruction manual and frequently asked questions - Evolut - Page 150
EW-DX EM 2 rack receiver Updating the firmware of the receiver You can update the receiver firmware using the Sennheiser Control Cockpit software or the Wireless Systems Manager software. ▷ To do so, connect the receiver to a network (see "Connect- ing receivers in a network") and establish the - Sennheiser EW-DX SK | Instruction manual and frequently asked questions - Evolut - Page 151
EW-DX SKM | EW-DX SKM-S handheld transmitter EW-DX SKM | EW-DX SKM-S handheld transmitter Product overview ► 1 ON/OFF button • See "Switching the handheld transmitter on and off" 2 DATA LED • See "Meaning of the LEDs" 3 SYNC button • See "Establishing a connection to the receiver" 4 LINK LED • See " - Sennheiser EW-DX SK | Instruction manual and frequently asked questions - Evolut - Page 152
EW-DX SKM | EW-DX SKM-S handheld transmitter Inserting and removing the batteries/rechargeable batteries You can operate the handheld transmitter either with batteries (AA, 1.5 V) or with the rechargeable Sennheiser BA 70 battery. ▷ Unscrew the microphone housing as shown in the figure and pull it - Sennheiser EW-DX SK | Instruction manual and frequently asked questions - Evolut - Page 153
EW-DX SKM | EW-DX SKM-S handheld transmitter Replacing the microphone module To replace the microphone module: ▷ Unscrew the microphone module. ▷ Screw the desired microphone module on. ▷ Do not touch - Sennheiser EW-DX SK | Instruction manual and frequently asked questions - Evolut - Page 154
EW-DX SKM | EW-DX SKM-S handheld transmitter • MMD 945-1 | Dynamic microphone module with super-cardioid pick-up pattern • MMK 965-1 | Condenser microphone module with selectable pattern: cardioid and super- - Sennheiser EW-DX SK | Instruction manual and frequently asked questions - Evolut - Page 155
EW-DX SKM | EW-DX SKM-S handheld transmitter Switching the handheld transmitter on and off To switch the handheld transmitter on: ▷ E-Ink display still displays the parameters after it is switched off. ► Display when transmitter is switched on: EW-DX 1 510.100 Display when transmitter is switched off - Sennheiser EW-DX SK | Instruction manual and frequently asked questions - Evolut - Page 156
EW-DX SKM | EW-DX SKM-S handheld transmitter Checking the battery status of the transmitter (Check function) To check the battery status 5 seconds. Pressing the transmitter's ON/OFF button will simultaneously trigger the Identify function: "Identifying the paired receiver (Identify function)". 155 - Sennheiser EW-DX SK | Instruction manual and frequently asked questions - Evolut - Page 157
EW-DX SKM | EW-DX SKM-S handheld transmitter Identifying the paired receiver (Identify function) In multi-channel systems, you can use the Check function to quickly identify to which receiver the transmitter is paired. Both the transmitter and receiver must be switched on. ▷ Short-press the ON/OFF - Sennheiser EW-DX SK | Instruction manual and frequently asked questions - Evolut - Page 158
EW-DX SKM | EW-DX SKM-S handheld transmitter Meaning of the LEDs The LINK and DATA LEDs on the bottom of the transmitter can indicate the following information. LINK LED The LINK LED provides information about the status of the radio link between the transmitter and receiver, as well as status - Sennheiser EW-DX SK | Instruction manual and frequently asked questions - Evolut - Page 159
EW-DX SKM | EW-DX SKM-S handheld transmitter The LED is continuously red: ▷ The (rechargeable) battery in the transmitter is dead. The LED is flashing red: ▷ The link between the transmitter and receiver is estab- lished. ▷ The battery/rechargeable battery in the transmitter is low. The LED is off: - Sennheiser EW-DX SK | Instruction manual and frequently asked questions - Evolut - Page 160
EW-DX SKM | EW-DX SKM-S handheld transmitter Establishing a connection to the receiver To establish a radio link between the transmitter and the receiver, the two devices must be set to the same frequency. See "Establishing a radio link | Synchronizing the receiver and transmitter". Conditions and - Sennheiser EW-DX SK | Instruction manual and frequently asked questions - Evolut - Page 161
EW-DX 1 510.100 6:43 Battery status Further information System icons Link name: You can assign a name to the radio link in the transmitter's menu (see "Name menu item"). Alternatively, you can assign the name in the receiver radio link can also be set manually in the receiver's menu (see "Ch 1 / - Sennheiser EW-DX SK | Instruction manual and frequently asked questions - Evolut - Page 162
to display the battery status for approx. 5 seconds. System icons: The transmitter's mute switch is deactivated. See "Mute Button menu item (only EW-DX SKM-S)". The Auto Lock function is activated. See "Auto Lock menu item". AES 256 encryption is enabled. See "System -> Encryption menu item". 161 - Sennheiser EW-DX SK | Instruction manual and frequently asked questions - Evolut - Page 163
EW-DX SKM | EW-DX SKM-S handheld transmitter Note that the transmitter's permanent E-Ink display still displays the parameters after it is switched off. Display when transmitter is switched on: EW-DX 1 510.100 Display when transmitter is switched off: EW-DX 1 510.100 off 162 - Sennheiser EW-DX SK | Instruction manual and frequently asked questions - Evolut - Page 164
EW-DX SKM | EW-DX SKM-S handheld transmitter Buttons for navigating the handheld transmitter's menu Use the following buttons to navigate through the transmitter's operating menu. ► Press the SET button • - Sennheiser EW-DX SK | Instruction manual and frequently asked questions - Evolut - Page 165
EW-DX SKM | EW-DX SKM-S handheld transmitter Making settings in the menu of the handheld transmitter Navigating through the menu To open the menu: ▷ Press the SET button. The - Sennheiser EW-DX SK | Instruction manual and frequently asked questions - Evolut - Page 166
EW-DX SKM | EW-DX SKM-S handheld transmitter ▷ At the last position, press the SET button to save the selected name. If you enter a name for the radio link in the Name menu item on the receiver and then synchronize the receiving channel with the transmitter, the name entered in the transmitter is - Sennheiser EW-DX SK | Instruction manual and frequently asked questions - Evolut - Page 167
EW-DX SKM | EW-DX SKM-S handheld transmitter ▷ Press the UP or DOWN button to set the desired value. ▷ Press the SET button to confirm your selection. If you set a value for the channel's low cut filter using the Low Cut menu item on the receiver and then synchronize the receiving channel with the - Sennheiser EW-DX SK | Instruction manual and frequently asked questions - Evolut - Page 168
(only EWDX SKM-S) This function is only available for the EW-DX SKM-S version, not for the EW-DX SKM version. In this menu item you can set the function mute switch in the Mute Mode menu item on the receiver and then synchronize the receiving channel with the transmitter, the value entered in the - Sennheiser EW-DX SK | Instruction manual and frequently asked questions - Evolut - Page 169
EW-DX SKM | EW-DX SKM-S handheld transmitter The lock-off prevents the transmitter from the transmitter's automatic lock-off in the Auto Lock menu item on the receiver and then synchronize the receiving channel with the transmitter, the value entered in the transmitter is overwritten with the value - Sennheiser EW-DX SK | Instruction manual and frequently asked questions - Evolut - Page 170
EW-DX SKM | EW-DX SKM-S handheld transmitter ▷ Press the UP or DOWN button to set the desired value. ▷ Press the SET button to confirm your selection. If you set a function for the transmitter's LINK LED in the LED menu item on the receiver and then synchronize the receiving channel with the - Sennheiser EW-DX SK | Instruction manual and frequently asked questions - Evolut - Page 171
EW-DX SKM | EW-DX SKM-S handheld transmitter ▷ Press the UP or DOWN button to set the desired value. ▷ Press the SET button to confirm your selection. 170 - Sennheiser EW-DX SK | Instruction manual and frequently asked questions - Evolut - Page 172
EW-DX SKM | EW-DX SKM-S handheld transmitter Lock-off function You can enable or disable the automatic lock-off function in . The lock-off function remains deactivated while you are actively working in the operating menu. After 10 seconds of inactivity, it automatically activates again. 171 - Sennheiser EW-DX SK | Instruction manual and frequently asked questions - Evolut - Page 173
this, you must configure the function of the mute switch in the Mute Mode menu item. ▷ On the receiver: "Ch 1 / Ch 2 -> Mute Mode menu item" ▷ On the transmitter: "Mute Button menu item (only EW- DX SKM-S)" AF Mute ▷ Slide the mute switch to the desired position to mute or activate the audio signal - Sennheiser EW-DX SK | Instruction manual and frequently asked questions - Evolut - Page 174
EW-DX SK | EW-DX SK 3-PIN bodypack transmitter EW-DX SK | EW-DX SK 3-PIN bodypack transmitter Product overview ► 1 SYNC button • See "Establishing a radio link | Synchronizing the receiver and transmitter" 2 DATA LED • See "Meaning of the LEDs" 3 LINK LED • See "Meaning of the LEDs" 4 Mute switch • - Sennheiser EW-DX SK | Instruction manual and frequently asked questions - Evolut - Page 175
EW-DX SK | EW-DX SK 3-PIN bodypack transmitter Inserting and removing the batteries/rechargeable batteries You can operate the bodypack transmitter either with batteries (AA, 1.5 V) or with the rechargeable Sennheiser BA 70 battery. ▷ Press the two catches and open the battery compartment cover. ▷ - Sennheiser EW-DX SK | Instruction manual and frequently asked questions - Evolut - Page 176
's coupling ring onto the audio socket thread of the bodypack transmitter. Compatible microphones The following microphones are compatible with the EW-DX SK bodypack transmitter: Lavalier microphones: • ME 2 | Lavalier microphone with omni-directional pattern (models from 2021 and later with gold - Sennheiser EW-DX SK | Instruction manual and frequently asked questions - Evolut - Page 177
EW-DX SK | EW-DX SK 3-PIN bodypack transmitter • MKE 2 Gold | Lavalier microphone with omni-directional pattern (models from 2018 and later with blue serial number label) • MKE 1 | Lavalier microphone - Sennheiser EW-DX SK | Instruction manual and frequently asked questions - Evolut - Page 178
EW-DX SK | EW-DX SK 3-PIN bodypack transmitter Connecting a microphone to the EW-DX SK 3-PIN To connect a microphone to the EW-DX SK 3-PIN bodypack transmitter: ▷ Insert the cable's three-pin plug into the socket on the bodypack transmitter as shown in the diagram. ▷ Screw the plug's - Sennheiser EW-DX SK | Instruction manual and frequently asked questions - Evolut - Page 179
EW-DX SK | EW-DX SK 3-PIN bodypack transmitter Headset microphones: • HSP Essential Omni Black-3-Pin | Headset microphone with omni-directional pattern • HSP Essential Omni Beige-3-Pin | Headset microphone with - Sennheiser EW-DX SK | Instruction manual and frequently asked questions - Evolut - Page 180
EW-DX SK | EW-DX SK 3-PIN bodypack transmitter Connecting an instrument or line plug on a lockable 3.5 mm jack plug) or CL 2 (XLR-3F plug on a lockable 3.5 mm jack plug) Sennheiser cables. To connect an instrument or line source to bodypack transmitter: ▷ Insert the cable's 3.5 mm jack plug into the - Sennheiser EW-DX SK | Instruction manual and frequently asked questions - Evolut - Page 181
EW-DX SK | EW-DX SK 3-PIN bodypack transmitter Connecting an instrument or line source to the EWDX SK 3-PIN You can connect instruments or audio sources with a line level to the bodypack transmitter. To do so, you require the Sennheiser CI 1-4 cable (6.3 mm (1/ 4") jack plug to screw-on 3-pin audio - Sennheiser EW-DX SK | Instruction manual and frequently asked questions - Evolut - Page 182
EW-DX SK | EW-DX SK 3-PIN bodypack transmitter Changing the belt clip You can change the belt clip on the bodypack transmitter or flip it over depending on how - Sennheiser EW-DX SK | Instruction manual and frequently asked questions - Evolut - Page 183
EW-DX SK | EW-DX SK 3-PIN bodypack transmitter Switching the bodypack transmitter on and off To switch the bodypack transmitter on: E-Ink display still displays the parameters after it is switched off. Display when transmitter is switched on: EW-DX 1 510.100 Display when transmitter is switched off - Sennheiser EW-DX SK | Instruction manual and frequently asked questions - Evolut - Page 184
EW-DX SK | EW-DX SK 3-PIN bodypack transmitter Checking the battery status of the transmitter (Check function) To check the battery 5 seconds. ► Pressing the transmitter's ON/OFF button will simultaneously trigger the Identify function: "Identifying the paired receiver (Identify function)". 183 - Sennheiser EW-DX SK | Instruction manual and frequently asked questions - Evolut - Page 185
EW-DX SK | EW-DX SK 3-PIN bodypack transmitter Identifying the paired receiver (Identify function) In multi-channel systems, you can use the Check function to quickly identify to which receiver the transmitter is paired. Both the transmitter and receiver must be switched on. ▷ Short-press the ON/OFF - Sennheiser EW-DX SK | Instruction manual and frequently asked questions - Evolut - Page 186
EW-DX SK | EW-DX SK 3-PIN bodypack transmitter Meaning of the LEDs The LINK and DATA LEDs on the top of the transmitter can indicate the following information. LINK LED The LINK LED provides information about the status of the radio link between the transmitter and receiver, as well as status - Sennheiser EW-DX SK | Instruction manual and frequently asked questions - Evolut - Page 187
EW-DX SK | EW-DX SK 3-PIN bodypack transmitter The LED is continuously red: ▷ The (rechargeable) battery in the transmitter is dead. The LED is flashing red: ▷ The link between the transmitter and receiver is estab- lished. ▷ The battery/rechargeable battery in the transmitter is low. The LED is off - Sennheiser EW-DX SK | Instruction manual and frequently asked questions - Evolut - Page 188
EW-DX SK | EW-DX SK 3-PIN bodypack transmitter Establishing a connection to the receiver To establish a radio link between the transmitter and the receiver, the two devices must be set to the same frequency. See "Establishing a radio link | Synchronizing the receiver and transmitter". Conditions and - Sennheiser EW-DX SK | Instruction manual and frequently asked questions - Evolut - Page 189
EW-DX 1 510.100 6:43 Battery status Further information System icons Link name: You can assign a name to the radio link in the transmitter's menu (see "Name menu item"). Alternatively, you can assign the name in the receiver radio link can also be set manually in the receiver's menu (see "Ch 1 / - Sennheiser EW-DX SK | Instruction manual and frequently asked questions - Evolut - Page 190
EW-DX SK | EW-DX SK 3-PIN bodypack transmitter Battery status: Displays the charging status of the batteries or the BA 70 battery pack. When using the BA 70 rechargeable - Sennheiser EW-DX SK | Instruction manual and frequently asked questions - Evolut - Page 191
EW-DX SK | EW-DX SK 3-PIN bodypack transmitter Note that the transmitter's permanent E-Ink display still displays the parameters after it is switched off. Display when transmitter is switched on: EW-DX 1 510.100 Display when transmitter is switched off: EW-DX 1 510.100 off 190 - Sennheiser EW-DX SK | Instruction manual and frequently asked questions - Evolut - Page 192
EW-DX SK | EW-DX SK 3-PIN bodypack transmitter Buttons for navigating the menu of the bodypack transmitter Use the following buttons to navigate through the transmitter's operating menu. ► Press - Sennheiser EW-DX SK | Instruction manual and frequently asked questions - Evolut - Page 193
EW-DX SK | EW-DX SK 3-PIN bodypack transmitter Making settings in the menu of the bodypack transmitter Navigating through the menu To open the menu: ▷ Press the SET button. - Sennheiser EW-DX SK | Instruction manual and frequently asked questions - Evolut - Page 194
EW-DX SK | EW-DX SK 3-PIN bodypack transmitter ▷ At the last position, press the SET button to save the selected name. If you enter a name for the radio link in the Name menu item on the receiver and then synchronize the receiving channel with the transmitter, the name entered in the transmitter is - Sennheiser EW-DX SK | Instruction manual and frequently asked questions - Evolut - Page 195
EW-DX SK | EW-DX SK 3-PIN bodypack transmitter ▷ Press the UP or DOWN button to set the desired value. ▷ Press the SET button to confirm your selection. If you set a value for the channel's low cut filter using the Low Cut menu item on the receiver and then synchronize the receiving channel with the - Sennheiser EW-DX SK | Instruction manual and frequently asked questions - Evolut - Page 196
EW-DX SK | EW-DX SK 3-PIN bodypack transmitter ▷ Press the SET button to confirm your selection. If you set a value for the channel in the Cable Emul. menu item on the receiver and then synchronize the receiving channel with the transmitter, the value entered in the transmitter is overwritten with - Sennheiser EW-DX SK | Instruction manual and frequently asked questions - Evolut - Page 197
EW-DX SK | EW-DX SK 3-PIN bodypack transmitter in the transmitter is overwritten with the value entered in the receiver. Auto Lock menu item In this menu item, you can activate or deactivate the automatic lock-off for the transmitter. The lock-off prevents the - Sennheiser EW-DX SK | Instruction manual and frequently asked questions - Evolut - Page 198
EW-DX SK | EW-DX SK 3-PIN bodypack transmitter LED menu item This menu item allows you to set a function for the transmitter's LINK LED in the LED menu item on the receiver and then synchronize the receiving channel with the transmitter, the value entered in the transmitter is overwritten with the - Sennheiser EW-DX SK | Instruction manual and frequently asked questions - Evolut - Page 199
EW-DX SK | EW-DX SK 3-PIN bodypack transmitter Reset to factory settings ▷ Press the SET button to open the Reset menu item. ▷ Press the UP or DOWN button to set the desired value. ▷ Press the SET button to confirm your selection. 198 - Sennheiser EW-DX SK | Instruction manual and frequently asked questions - Evolut - Page 200
EW-DX SK | EW-DX SK 3-PIN bodypack transmitter Lock-off function You can enable or disable the automatic lock-off function . The lock-off function remains deactivated while you are actively working in the operating menu. After 10 seconds of inactivity, it automatically activates again. 199 - Sennheiser EW-DX SK | Instruction manual and frequently asked questions - Evolut - Page 201
EW-DX SK | EW-DX SK 3-PIN bodypack transmitter Configuring mute mode and muting the Mute). To do this, you must configure the function of the mute switch in the Mute Mode menu item. ▷ On the receiver: "Ch 1 / Ch 2 -> Mute Mode menu item" ▷ ON the transmitter: "Mute Button menu item" AF Mute - Sennheiser EW-DX SK | Instruction manual and frequently asked questions - Evolut - Page 202
EK portable receiver EW-DP EK portable receiver Product overview Front 1 Display for status information and operating menu • See "Displays on the receiver's display panel" 2 LINK and DATA LEDs to indicate connection status and Bluetooth status • See "Meaning of the LEDs" 3 UP/DOWN/SET menu buttons - Sennheiser EW-DX SK | Instruction manual and frequently asked questions - Evolut - Page 203
Side EW-DP EK portable receiver 6 3.5 mm jack socket for headphones • See "Outputting audio signals" 7 USB-C connection socket for power supply • See "Power supply" 8 3.5 mm jack socket for connecting cable • See "Outputting audio signals" 202 - Sennheiser EW-DX SK | Instruction manual and frequently asked questions - Evolut - Page 204
USB-C Power EW-DP EK portable receiver Power supply The EW-DP EK can be powered in two different ways: Power supply via USB-C from a camera or power bank: SET ESC SYNC Powerbank ▷ Connect the receiver to a camera or other power supply using a USB-C cable. Power supply via USB-C cable: 5 V/min. 1 A - Sennheiser EW-DX SK | Instruction manual and frequently asked questions - Evolut - Page 205
EW-DP EK portable receiver Power supply via (rechargeable) batteries: SET ESC SYNC SET ESC SYNC SET BA 70 rechargeable battery ESC SYNC (included in scope of delivery) optional: 2 AA batteries ▷ Open the EW EK unit. The EW-DP EK supports the USB Power Delivery Protocol for smart USB-C power supply units - Sennheiser EW-DX SK | Instruction manual and frequently asked questions - Evolut - Page 206
-DP EK portable receiver Outputting audio signals The EW-DP EK has an unbalanced 3.5 mm audio output and an unbalanced 3.5 mm headphone output. CAUTION Danger due to high volume lowest volume setting. To connect a 3.5 mm jack cable: ▷ Plug the jack cable into the MIC OUT socket on the EW-DP EK. 205 - Sennheiser EW-DX SK | Instruction manual and frequently asked questions - Evolut - Page 207
EW-DP EK portable receiver Mounting the receiver / mounting options EW-DP EK mounting accessories: 206 - Sennheiser EW-DX SK | Instruction manual and frequently asked questions - Evolut - Page 208
EW-DP EK portable receiver Combining the mounting plate and hot shoe adapter: The hot shoe adapter can be fitted to the mounting plate in different positions according to the - Sennheiser EW-DX SK | Instruction manual and frequently asked questions - Evolut - Page 209
Mounting plate and clip: EW-DP EK portable receiver As an alternative to the hot shoe adapter, a metal clip can be attached to the side of the ▷ Insert the clip into the side of the mounting plate as shown. This enables you to attach the receiver to belts or pockets using the mounting plate. 208 - Sennheiser EW-DX SK | Instruction manual and frequently asked questions - Evolut - Page 210
EW-DP EK portable receiver Mounting/stacking receivers on the mounting plate: The receiver has magnets on the bottom, which means you can simply place it on the mounting plate without the need for an additional screw connection. This allows you to stack two receivers on top of one another. To mount - Sennheiser EW-DX SK | Instruction manual and frequently asked questions - Evolut - Page 211
EW-DP EK portable receiver Mounting with the mounting plate in a rotated position: To mount the receiver with the mounting plate rotated by 90°: ▷ Turn the mounting plate by 90° and screw it to the bottom of the receiver in the desired position. This mounting variant is particularly suitable for - Sennheiser EW-DX SK | Instruction manual and frequently asked questions - Evolut - Page 212
EW-DP EK portable receiver Example for mounting on a DSLR or video camera: To mount the mounting plate with hot shoe adapter on a DSLR or video camera: ▷ Rotate the lever on the hot shoe adapter until the adapter is tightly attached. Now you can attach one or two receivers to the mounting plate. 211 - Sennheiser EW-DX SK | Instruction manual and frequently asked questions - Evolut - Page 213
EW-DP EK portable receiver Example for mounting on camera cages: To attach the mounting plate to a camera cage: ▷ Screw the mounting plate to the camera cage using one or two screws, depending on the mounting situation and position. ▷ Attach the receiver to the mounting plate. 212 - Sennheiser EW-DX SK | Instruction manual and frequently asked questions - Evolut - Page 214
EW-DP EK portable receiver Example for attaching to pockets and belts: To fasten the receiver with mounting plate to pockets or belts: ▷ Attach the clip to the mounting plate. ▷ Attach the mounting plate to the receiver by inserting a screw through the slot. You can now clip the receiver to belts or - Sennheiser EW-DX SK | Instruction manual and frequently asked questions - Evolut - Page 215
EW-DP EK portable receiver Example for mounting on tripods: To fasten the mounting plate to a tripod: ▷ Screw the mounting plate onto the tripod thread at the de- sired position. Now you can attach one or two receivers to the mounting plate. 214 - Sennheiser EW-DX SK | Instruction manual and frequently asked questions - Evolut - Page 216
EW-DP EK portable receiver Switching the receiver on and off To switch the receiver on: ▷ Short-press the ON/OFF button. The receiver switches on. To switch the receiver off: ▷ Press the ON/OFF button. ▷ The receiver switches off. 215 - Sennheiser EW-DX SK | Instruction manual and frequently asked questions - Evolut - Page 217
Meaning of the LEDs EW-DP EK portable receiver The LINK and DATA LEDs on the front of the receiver can indicate the following information. LINK LED The LINK LED provides information about the status of the radio link between the transmitter and receiver, as well as status information for the - Sennheiser EW-DX SK | Instruction manual and frequently asked questions - Evolut - Page 218
. The LED is flashing blue: ▷ The Bluetooth Low Energy link is being established be- tween the receiver and a smartphone or tablet with the EW-D Smart Assist app. or ▷ The receiver is being synchronized with a transmitter. The LED is continuously blue: ▷ The firmware is being updated. The LED - Sennheiser EW-DX SK | Instruction manual and frequently asked questions - Evolut - Page 219
configure all of the settings (see "Making settings in the menu"). Display page Mute switch Receiver battery (EK) Transmitter battery (SK / SKM-S) Transmitter audio level PEAK display 7:30h 12:00h EW-D 470.200 MHz (01) +18 dB Frequency Link name Channel Gain Radio frequency level Further - Sennheiser EW-DX SK | Instruction manual and frequently asked questions - Evolut - Page 220
EW-DP EK portable receiver Link name: Can be changed in the Smart Assist app. Receiver battery: "Power supply" Transmitter battery: SKM-S -> "Inserting and removing the batteries/rechargeable batteries" | SK -> "Inserting and removing the batteries/rechargeable batteries" Frequency / channel: "AUTO - Sennheiser EW-DX SK | Instruction manual and frequently asked questions - Evolut - Page 221
EW-DP EK portable receiver Making settings in the menu Buttons for navigating the menu Use the following buttons to navigate through the receiver's operating menu. ► Press the SET button • Open the menu • Save settings in a menu item Press the UP or DOWN button • Changes to the previous or - Sennheiser EW-DX SK | Instruction manual and frequently asked questions - Evolut - Page 222
EW-DP EK portable receiver Main view and advanced view After the device switches on, the display shows the main view. ► See "Displays on the receiver's display panel" ▷ Press the UP button to access the advanced view. ► See "Displays on the receiver's display panel" Opening the menu and navigating - Sennheiser EW-DX SK | Instruction manual and frequently asked questions - Evolut - Page 223
EW-DP EK portable receiver To open a menu item: ▷ Navigate to the desired menu item until menu item Under the Output level menu item, you can set the level of the audio signal coming from the receiver's audio outputs. This audio signal can be output to a camera input or a mixing console, for example. - Sennheiser EW-DX SK | Instruction manual and frequently asked questions - Evolut - Page 224
EW-DP EK portable receiver Headphone menu item Under the Headphone menu item, you can set the volume of the audio signal coming from the receiver's headphone output. CAUTION Danger due to high volume levels Volume levels that are too high may damage your hearing. ▷ Turn down the volume of the - Sennheiser EW-DX SK | Instruction manual and frequently asked questions - Evolut - Page 225
EW-DP EK portable receiver MUTE switch menu item Under the MUTE switch menu item, you can disable the mute switch on the paired transmitter. The transmitter can then no - Sennheiser EW-DX SK | Instruction manual and frequently asked questions - Evolut - Page 226
EW-DP EK portable receiver AUTO SCAN menu item Under the AUTO SCAN menu item, you can perform frequency remains unchanged. If you have set a new frequency, you must still synchronize the receiver with the transmitter to establish the radio link (see "Establishing a radio link | Synchronizing the - Sennheiser EW-DX SK | Instruction manual and frequently asked questions - Evolut - Page 227
EW-DP EK portable receiver CHANNEL menu item Under the CHANNEL menu item, you can set the radio frequency remains unchanged. If you have set a new frequency, you must still synchronize the receiver with the transmitter to establish the radio link (see "Establishing a radio link | Synchronizing the - Sennheiser EW-DX SK | Instruction manual and frequently asked questions - Evolut - Page 228
EW-DP EK portable receiver Frequency menu item Under the FREQUENCY menu item, you can manually set the radio frequency independently of the preset channels. If you are not sure whether the selected frequency is free, we recommend performing a scan to - Sennheiser EW-DX SK | Instruction manual and frequently asked questions - Evolut - Page 229
EW-DP EK portable receiver BRIGHTNESS menu item Under the BRIGHTNESS menu item, you can set the to the main view or advanced view. RESET menu item Under the RESET menu item, you can reset the receiver to its factory settings. ▷ Open the RESET menu item. The display looks as follows. ► ▷ Press the - Sennheiser EW-DX SK | Instruction manual and frequently asked questions - Evolut - Page 230
the receiver and transmitter Information on compatibility between EW-D, EWDX and EW-DP The transmitter and the receiver are fully compatible with each other. The transmitter and the receiver are compatible , find the information for your country at the following address: www.sennheiser.com/sifa 229 - Sennheiser EW-DX SK | Instruction manual and frequently asked questions - Evolut - Page 231
and transmitter Connecting to the EW-D EM receiver / synchronizing the EW-D EM To establish a radio link between the transmitter and receiver, we recommend the following procedure. In order to establish a connection between a receiver and transmitters of the EW-D series, the devices must always - Sennheiser EW-DX SK | Instruction manual and frequently asked questions - Evolut - Page 232
the frequency manually. ▷ EW-DX EM 2: "Ch 1 / Ch 2 -> Frequency menu item" ▷ EW-DX SKM(-S): "Making settings in the menu of the hand- held transmitter" ▷ EW-DX SK (3-PIN): "Making settings in the menu of the bodypack transmitter" Once you have set the same frequency for the desired receiving channel - Sennheiser EW-DX SK | Instruction manual and frequently asked questions - Evolut - Page 233
Establishing a radio link | Synchronizing the receiver and transmitter The receiver's display shows that the synchronization process has started. The LED for the selected receiving channel flashes blue. ▷ Short-press the SYNC button on the transmitter. The blue DATA LED flashes. ► The transmitter - Sennheiser EW-DX SK | Instruction manual and frequently asked questions - Evolut - Page 234
receiver and transmitters of the EW-DP EK series, the devices must always be synchronized with each other. To successfully connect receivers manually (see "CHANNEL menu item" or "Frequency menu item"). Step 2: Pairing a receiver with a transmitter ▷ Short-press the SYNC button on the receiver. - Sennheiser EW-DX SK | Instruction manual and frequently asked questions - Evolut - Page 235
Charging the BA 70 rechargeable battery in the L 70 USB charger Charging the BA 70 rechargeable battery in the L 70 USB charger Connecting/disconnecting the charger to/ from the power supply system To connect the charger to the power supply system: ▷ Use only the NT 5-20 UCW power supply unit from - Sennheiser EW-DX SK | Instruction manual and frequently asked questions - Evolut - Page 236
Charging the BA 70 rechargeable battery in the L 70 USB charger Charging the rechargeable battery To charge the BA 70 rechargeable battery in the L 70 USB charger: ▷ Slide the rechargeable battery completely into the charging slot as shown in the figure. ► The rechargeable battery will begin - Sennheiser EW-DX SK | Instruction manual and frequently asked questions - Evolut - Page 237
(3-PIN) bodypack transmitter or the BA 70 Front 1 Charging the EW-DX SKM(-S) handheld transmitter, the EW-DX SK (3-PIN) bodypack transmitter or the BA 70 rechargeable battery in the CHG 70N charger Product overview Back 1 2 2 3 45 1 Charging slots • See "Charging the rechargeable - Sennheiser EW-DX SK | Instruction manual and frequently asked questions - Evolut - Page 238
Charging the EW-DX SKM(-S) handheld transmitter, the EW-DX SK (3-PIN) bodypack transmitter or the BA 70 Connecting/disconnecting the charger to/ from the power supply system You can operate the charger either with the Sennheiser NT 1235 CS power supply unit or with Power over Ethernet (PoE IEEE 802. - Sennheiser EW-DX SK | Instruction manual and frequently asked questions - Evolut - Page 239
Charging the EW-DX SKM(-S) handheld transmitter, the EW-DX SK (3-PIN) bodypack transmitter or the BA 70 Power over Ethernet (PoE) The charger can be powered via Power over Ethernet (PoE IEEE 802.3af Class 0). ▷ Connect the charger to a PoE-enabled network switch. 238 - Sennheiser EW-DX SK | Instruction manual and frequently asked questions - Evolut - Page 240
into your existing network infrastructure with any other types of devices. For more information about controlling devices via the Sennheiser Wireless Systems Manager or Sennheiser Control Cockpit software, refer to the instruction manual for the software. You can download the software here: www - Sennheiser EW-DX SK | Instruction manual and frequently asked questions - Evolut - Page 241
the rechargeable battery You can use the CHG 70N charger to charge individual BA 70 rechargeable batteries, or to charge EW-DX SKM, EW-DX SKM-S, EW-DX SK or EW-DX SK 3-PIN transmitters with the BA 70 rechargeable battery already inserted. To charge the battery: ▷ Insert the individual rechargeable - Sennheiser EW-DX SK | Instruction manual and frequently asked questions - Evolut - Page 242
Charging the EW-DX SKM(-S) handheld transmitter, the EW-DX SK (3-PIN) bodypack transmitter or the BA 70 Power saving mode In power saving mode, the transmitters are charged only once. The charger also does - Sennheiser EW-DX SK | Instruction manual and frequently asked questions - Evolut - Page 243
on and off" 2 LED: Operation indicator • See "Switching the EW-D ASA on and off" 3 4 BNC sockets B1 to B4 • RF outputs of diversity branch B for connection to the receiver • See "Connecting receivers to the EW-D ASA" 4 ANT RF IN B BNC socket • Antenna input of diversity branch B • See "Connecting - Sennheiser EW-DX SK | Instruction manual and frequently asked questions - Evolut - Page 244
" 6 4 BNC sockets A1 to A4 • RF outputs of diversity branch A for connection to the receiver • Each one of these RF outputs can also provide power to an EW-D EM receiver • See "Connecting receivers to the EW-D ASA" 7 RF OUT A BNC socket • RF output only for connecting an additional ASA 214 to - Sennheiser EW-DX SK | Instruction manual and frequently asked questions - Evolut - Page 245
to/from the power supply system To supply power to the EW-D ASA, the connected receivers (EW-D EM only) and any antenna amplifiers used, you will need the NT 12-35 CS power supply unit. Use only the supplied NT 12-35 CS - Sennheiser EW-DX SK | Instruction manual and frequently asked questions - Evolut - Page 246
and operate up to four EW-D EM or EWDX EM 2 rack receivers with the EW-D ASA. To connect the receivers to the EW-D ASA antenna splitter: ▷ Connect one of the receiver's antenna inputs to one of the BNC sockets A1 to A4 using one of the supplied BNC cables. The EW-D EM receivers do not require their - Sennheiser EW-DX SK | Instruction manual and frequently asked questions - Evolut - Page 247
EW-D ASA antenna splitter Connecting antennas To ensure optimal reception even an antenna amplifier to the BNC sockets ANT RF IN A and ANT RF IN B. ▷ Refer to the instructions under "Information on antenna amplifiers and cable lengths". Connecting rod antennas ▷ Mount the antennas to the BNC sockets - Sennheiser EW-DX SK | Instruction manual and frequently asked questions - Evolut - Page 248
antenna amplifier as well as the maximum recommended cable lengths. Frequency range around 500 MHz 700 MHz 900 MHz 1800 MHz Number of EW-D AB 0 1 2 0 1 2 0 1 2 0 1 2 Max. cable length RG 58 GZL 5000 8 m 16 m 36 m 72 m 64 m 128 m 7 m 14 m 30 m 60 m 53 m 106 m 6 m 12 m 26 m 52 m 46 - Sennheiser EW-DX SK | Instruction manual and frequently asked questions - Evolut - Page 249
EW-D ASA antenna splitter Configuring multi-channel systems The following options for connecting multi-channel systems are possible: Option 1: Two antennas supply a 4-channel system 248 - Sennheiser EW-DX SK | Instruction manual and frequently asked questions - Evolut - Page 250
EW-D ASA antenna splitter Option 2: Two 4-channel systems are interconnected 249 - Sennheiser EW-DX SK | Instruction manual and frequently asked questions - Evolut - Page 251
EW-D ASA antenna splitter Option 3: Two antennas supply a 8-channel system 250 - Sennheiser EW-DX SK | Instruction manual and frequently asked questions - Evolut - Page 252
limit value. As a remedy, ground the rack via an additional ground connection. To mount the antenna splitter in a rack, you will need the GA 3 rack mount kit (optional accessory). Rack mounting is carried out in the same way as for the EWD EM receiver: "Installing receivers in a rack". 251 - Sennheiser EW-DX SK | Instruction manual and frequently asked questions - Evolut - Page 253
are switched off if they draw their supply voltage from the BNC sockets A1 to A4 (see "Connecting receivers to the EW-D ASA"). To fully switch off the antenna splitter: ▷ Disconnect the antenna splitter from the power supply system by unplugging the power supply unit from the - Sennheiser EW-DX SK | Instruction manual and frequently asked questions - Evolut - Page 254
remove rechargeable batteries and batteries before you begin cleaning. ▷ Clean all products only with a soft, dry cloth. ▷ Note the special cleaning instructions below for the following products. Cleaning the sound inlet basket of the microphone module ▷ Unscrew the top sound inlet basket from the - Sennheiser EW-DX SK | Instruction manual and frequently asked questions - Evolut - Page 255
Cleaning and maintenance ▷ Dry the top sound inlet basket and foam insert. ▷ Reinsert the foam insert. ▷ Screw the sound inlet basket back onto the microphone module. From time to time, you should also clean the microphone module contacts: ▷ Wipe the contacts of the microphone module with a soft, - Sennheiser EW-DX SK | Instruction manual and frequently asked questions - Evolut - Page 256
FREQUENTLY ASKED QUESTIONS This section contains answers to frequently asked questions and further information about the following topics: „Radio and frequencies" „Audio" „Usability" „Accessories" „EW-D Smart Assist app" 255 - Sennheiser EW-DX SK | Instruction manual and frequently asked questions - Evolut - Page 257
which transmitter is coupled to which receiver? • EW-D SKM-S: „Identifying the paired receiver (Identify function)" • EW-D SK: „Identifying the paired receiver (Identify func- tion)" • EW-DX SKM(-S): „Identifying the paired receiver (Identify function)" • EW-DX SK (3-PIN): „Identifying the paired - Sennheiser EW-DX SK | Instruction manual and frequently asked questions - Evolut - Page 258
are synchronized, but there is no connection. • Install antennas correctly on the receiver (EW-D EM: „Con- necting antennas" | EW-DX EM 2: „Connecting antennas") • EW-D: Use the scan function to find a free channel („AUTO SCAN menu item") and synchronize the transmitter again („Establishing a radio - Sennheiser EW-DX SK | Instruction manual and frequently asked questions - Evolut - Page 259
„Replacing the microphone module" • EW-DX SKM(-S): „Replacing the microphone module" What exactly do the "Gain" and "AF Out" settings do? • Gain: level of the audio signal coming from the transmitter („GAIN menu item") • AF Out: level of the audio signal coming out of the receiver („AF OUT menu item - Sennheiser EW-DX SK | Instruction manual and frequently asked questions - Evolut - Page 260
(EW-DX SKM(-S): „Trim menu item" | EWDX SK (3-PIN): „Trim menu item") to adjust the sensitivity to the incoming audio signal. What is the latency? • 1.9 ms Which audio outputs are available on the receiver? • XLR-3 and 6.3 mm jack (EW-D EM: „Outputting audio signals" | EW-DX EM 2: „Outputting - Sennheiser EW-DX SK | Instruction manual and frequently asked questions - Evolut - Page 261
too long („Establishing a radio link | Synchronizing the receiver and transmitter") • The two devices must have the EW-D EM: „Meaning of the LEDs" • EW-D SKM-S: „Meaning of the LEDs" • EW-D SK: „Meaning of the LEDs" • EW-DX EM 2: „Meaning of the LEDs" • EW-DX SKM(-S): „Meaning of the LEDs" • EW-DX - Sennheiser EW-DX SK | Instruction manual and frequently asked questions - Evolut - Page 262
My LINK LED is steady or flashing red. What does that mean? • EW-D EM: „Meaning of the LEDs" • EW-D SKM-S: „Meaning of the LEDs" • EW-D SK: „Meaning of the LEDs" • EW-DX EM 2: „Meaning of the LEDs" • EW-DX SKM(-S): „Meaning of the LEDs" • EW-DX SK (3-PIN): „Meaning of the LEDs" Can I also operate an - Sennheiser EW-DX SK | Instruction manual and frequently asked questions - Evolut - Page 263
do? • Gain: Level of the audio signal coming from the transmitter (EW-D EM: „GAIN menu item" | EW-DX EM 2: „Ch 1 / Ch 2 > Gain menu item") • AF Out: Level of the audio signal coming from the receiver (EW-D EM: „AF OUT menu item" | EW-DX EM 2: „Ch 1 / Ch 2 -> AF Out menu item") What is the meaning of - Sennheiser EW-DX SK | Instruction manual and frequently asked questions - Evolut - Page 264
Usability What is the best way to wear the bodypack transmitter? • Do not kink, bend or cover the antenna • Avoid skin contact with the antenna • If possible, attach it to your clothing with the belt clip Can you rotate the bodypack transmitter's belt clip so that the antenna points downward? • Yes, - Sennheiser EW-DX SK | Instruction manual and frequently asked questions - Evolut - Page 265
" Which microphone modules can I use with my handheld transmitter? • EW-D SKM-S: „Replacing the microphone module" • EW-DX SKM(-S): „Replacing the microphone module" Which batteries can I use for my transmitter? • 2 x AA 1.5 V or • Sennheiser BA 70 rechargeable battery („BA 70 recharge- able battery - Sennheiser EW-DX SK | Instruction manual and frequently asked questions - Evolut - Page 266
can I use with my receiver? • In principle, you can use all antennas with BNC connectors that cover the frequency ranges of the EW-D series („Frequency ranges") the power supply unit and the rack mounting bracket. • Take out the packaging insert: ► Rack mount angles Power supply adapters Power supply - Sennheiser EW-DX SK | Instruction manual and frequently asked questions - Evolut - Page 267
demo mode or on the website: https://www.sennheiser.com/evolution-wireless-digital-app In which languages is the app available? • English • German • French • Spanish • Portuguese • Russian • Chinese • Korean • Arabic Can I pair multiple smartphones with a single receiver? • No, you can pair only one - Sennheiser EW-DX SK | Instruction manual and frequently asked questions - Evolut - Page 268
EW-D Smart Assist app Can I set a specific frequency range for the Auto Scan function? • No, the function scans the entire available frequency spec- trum. Why can't I access a receiver? • The receiver may be switched off or out of Bluetooth range. How are the app and the receivers connected to the - Sennheiser EW-DX SK | Instruction manual and frequently asked questions - Evolut - Page 269
„System" „EW-D EM rack receiver" „EW-DX EM 2 rack receiver" „EW-D SKM-S handheld transmitter" „EW-DX SKM | EW-DX SKM-S handheld transmitter" „EW-D SK bodypack transmitter" „EW-DX SK | EW-DX SK 3-PIN bodypack transmitter" „EW-DP EK portable receiver" „EW-D ASA antenna splitter" „EW-D AB antenna - Sennheiser EW-DX SK | Instruction manual and frequently asked questions - Evolut - Page 270
„BA 70 rechargeable battery" „L 70 USB charger" „CHG 70N charger" 269 - Sennheiser EW-DX SK | Instruction manual and frequently asked questions - Evolut - Page 271
& 863.2 - 864.8 MHz • V3-4: 925.2 - 937.3 MHz • Y1-3: 1785.2 - 1799.8 MHz Audio-Link EW-DX frequency ranges • Q1-9: 470.2 - 550 MHz • R1-9: 520 - 607.8 MHz • S1-10: 606.2 - 693.8 MHz • S2-10: 614.2 - 693.8 MHz • S4-10: 630 - 693.8 MHz • U1/5: 823.2 - 831.8 MHz & 863.2 - 864.8 MHz • V3-4: 925.2 - 937 - Sennheiser EW-DX SK | Instruction manual and frequently asked questions - Evolut - Page 272
Operating temperature range -10 °C - +55 °C (EW-D, EW-DP) -10 °C - +50 °C (EW-DX) Relative humidity 5 - 95% (non-condensing) System 271 - Sennheiser EW-DX SK | Instruction manual and frequently asked questions - Evolut - Page 273
EW-D EM rack receiver EW-D EM rack receiver Input voltage DC 11 - 13 V Input current ≤ 300 mA Transmission power BLE: max. 10 mW EIRP Audio output power 18 dBu max. Dimensions 212 × 44 × 189 mm (1 3/4" x 3 7/8" x 7 3/16") Weight Approx. 1000 g (without antennas and power supply unit) 272 - Sennheiser EW-DX SK | Instruction manual and frequently asked questions - Evolut - Page 274
EW-DX EM 2 rack receiver EW-DX EM 2 rack receiver Input voltage DC 11 - 13 V or PoE IEEE 802.3af Class 0 (CAT5e or higher) Input current ≤ 1A Transmission power BLE: max. 10 mW EIRP Audio output power 18 dBu max. Headphone output 2x 70 mW @ 32 ? Ethernet RJ-45 socket, IEEE802.3 100Base-TX (half+full - Sennheiser EW-DX SK | Instruction manual and frequently asked questions - Evolut - Page 275
transmitter EW-D SKM-S handheld transmitter Input voltage 2.0 - 4.35 V Input current < 300 mA Power supply 2 AA batteries 1.5 V (alkali manganese) or BA 70 rechargeable battery pack Occupied bandwidth 200 kHz Transmission power • Audio link: 10 mW ERP (Range Y1-3: 12 mW ERP) • BLE: max. 10 mW - Sennheiser EW-DX SK | Instruction manual and frequently asked questions - Evolut - Page 276
EW-DX SKM | EW-DX SKM-S handheld transmitter EW-DX SKM | EW-DX SKM-S handheld transmitter Input voltage 2.0 - 4.35 V Input current < 300 mA Power supply 2 AA batteries 1.5 V (alkali manganese) or BA 70 rechargeable battery pack Occupied bandwidth 200 kHz Transmission power • Audio link: 10 mW ERP ( - Sennheiser EW-DX SK | Instruction manual and frequently asked questions - Evolut - Page 277
bodypack transmitter EW-D SK bodypack transmitter Input voltage 2.0 - 4.35 V Input current < 300 mA Power supply 2 AA batteries 1.5 V (alkali manganese) or BA 70 rechargeable battery pack Occupied bandwidth 200 kHz Transmission power • Audio link: 10 mW ERP (Range Y1-3: 12 mW ERP) • BLE: max. 10 mW - Sennheiser EW-DX SK | Instruction manual and frequently asked questions - Evolut - Page 278
EW-DX SK | EW-DX SK 3-PIN bodypack transmitter EW-DX SK | EW-DX SK 3-PIN bodypack transmitter Input voltage 2.0 - 4.35 V Input current < 300 mA Power supply 2 AA batteries 1.5 V (alkali manganese) or BA 70 rechargeable battery pack Occupied bandwidth 200 kHz Transmission power • Audio link: 10 mW - Sennheiser EW-DX SK | Instruction manual and frequently asked questions - Evolut - Page 279
EW-DP EK portable receiver Input voltage ~ 1.8 - 4.35 V Input current Typically < 250 mA / max. < 400 mA / max. < 750 mA (2x AA batteries) < 300 mA @ 5 V (USB-C standalone) Power supply 2x AA batteries 1.5 V or USB-C PD (max.): • 5 V/1500 mA • 9 V/900 mA • 12 V/700 mA Transmission power BLE: max. 10 - Sennheiser EW-DX SK | Instruction manual and frequently asked questions - Evolut - Page 280
• in A - out A1 ... A4: 0 ± 1 dB • in B - out B1 ... B4: 0 ± 1 dB IIP3 > 25 dBm Impedance 50 ? Reflection loss 10 dB (all RF outputs) Operating voltage DC +12 V from NT 12-35 CS power supply unit Current consumption 210 mA Total current consumption max. 3 A (with 4 EW-D EM and connected EW-D AB) 279 - Sennheiser EW-DX SK | Instruction manual and frequently asked questions - Evolut - Page 281
EW-D ASA antenna splitter Supply for antenna boosters at ANT RF in A and ANT RF in B • DC 12 V • 320 mA Supply for receivers at A1 to A4 • DC 12 V • Typically 350 mA, max. 500 mA Relative humidity 5 - 95% Operating temperature range -10 °C - +55 °C (14 °F - 131 °F) Storage temperature range -20 °C - - Sennheiser EW-DX SK | Instruction manual and frequently asked questions - Evolut - Page 282
Block diagram EW-D ASA antenna splitter 281 - Sennheiser EW-DX SK | Instruction manual and frequently asked questions - Evolut - Page 283
- 550 MHz • EW-D AB (R): 520 - 608 MHz • EW-D AB (S): 606 - 694 MHz • EW-D AB (U): 823 - 865 MHz • EW-D AB (V): 902 - 960 MHz • EW-D AB (Y): 1785 - 1805 MHz Power supply (DC coupled) DC 12 V (DC 9 - 18 V) / max. 160 mA @ 12 V, center contact + IIP3 > 25 dBm Max. RF input power +10 dBm Gain Typically - Sennheiser EW-DX SK | Instruction manual and frequently asked questions - Evolut - Page 284
Storage temperature range -20 °C - +70 °C (-4 °F - 158 °F) Relative humidity 5 - 95% EW-D AB antenna booster 283 - Sennheiser EW-DX SK | Instruction manual and frequently asked questions - Evolut - Page 285
Typically 5 dBi Impedance 50 ? Connection BNC female, no DC path Threads for tripod mounting 3/8" and 5/8" Dimensions 319 × 310 mm Weight Approx. 320 g Operating temperature range -10 °C - +55 °C (14 °F - 131 °F) Storage temperature range -20 °C - +85 °C (-4 °F - 158 °F) 284 - Sennheiser EW-DX SK | Instruction manual and frequently asked questions - Evolut - Page 286
ADP UHF passive directional antenna (470 - 1075 MHz) Relative humidity 5 - 95% Typical polar diagram ► 285 - Sennheiser EW-DX SK | Instruction manual and frequently asked questions - Evolut - Page 287
Dimensions Approx. 54 x 30 x 15 Weight Approx. 33 g Temperature range • Charging: 0 °C - +55 °C (32 °F - 131 °F) • Discharging: -10 °C - +55 °C (14 °F - 131 °F) • Storage: -10 °C - +45 °C (14 °F - 113 °F) Relative humidity • Charging/discharging: 25 to 95%, non-condensing • Storage: 30 to 70%, non - Sennheiser EW-DX SK | Instruction manual and frequently asked questions - Evolut - Page 288
L 70 USB charger L 70 USB charger Charging capacity 2 Sennheiser BA 70 rechargeable battery packs Input voltage Typically 5 V Input current max. 2 A Charging voltage nominally 4.35 V Charging current max. 860 mA per battery pack Charging time - Sennheiser EW-DX SK | Instruction manual and frequently asked questions - Evolut - Page 289
duplex) 10Base-T (half+full duplex) Dimensions Approx. 200 x 104 x 116 mm Weight approx. 640 g Charging slots 2 Charging capacity per slot BA 70 rechargeable battery or EW-DX SK with BA 70 or EW-DX SKM with BA 70 Charging voltage 4.35 V 288 - Sennheiser EW-DX SK | Instruction manual and frequently asked questions - Evolut - Page 290
Charging current min. 344 mA max. 860 mA Full charging time Max. 3.5 h Temperature range • Charging: -10 °C to +50 °C • Storage: -20 °C to +70 °C Relative humidity max. 95% (non-condensing) CHG 70N charger 289
Evolution Wireless Digital
EW-D | EW-DX | EW-DP
Sennheiser electronic GmbH & Co. KG
Am Labor 1, 30900 Wedemark, Germany, www.sennheiser.com
EW-D | EW-DX | EW-DP - v3.0 (04/2023)
Instruction manual
(PDF export of the original HTML manual)
This PDF document is a PDF export of an interactive manual in HTML format.
When displayed in PDF format, it is possible that not all content and interactive
elements in the HTML instructions are included, as these cannot be displayed in
PDF format.
We recommend using the complete and interactive HTML instructions.
You can find these in the Sennheiser Documentation App, which is available free of
charge for iOS and Android. Alternatively, the HTML instructions are also available
in the download area of the product page:
www.sennheiser.com/ew-d
www.sennheiser.com/ew-dx
www.sennheiser.com/ew-dp