Sennheiser TeamConnect Ceiling 2 Release notes for Dante firmware 1.5.0 for Te
Sennheiser TeamConnect Ceiling 2 Manual
View all Sennheiser TeamConnect Ceiling 2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Sennheiser TeamConnect Ceiling 2 manual content summary:
- Sennheiser TeamConnect Ceiling 2 | Release notes for Dante firmware 1.5.0 for Te - Page 1
Firmware version 1.1.0 - Release Date 2019-08-30 • Dante Model Name changed to "Sennheiser TCC2" • Additional Dante input channel enabled "AEC Ref" (AEC reference channel) • This update is necessary to make use of AEC Ref channel with TCC2 firmware ≥ v1.3.4 TeamConnect Ceiling 2 - Dante™ Firmware
TeamConnect Ceiling 2 - Dante
™
Firmware v1.5.0 | 1/1
TeamConnect Ceiling 2
Release Notes
TeamConnect Ceiling 2 - Dante™ Firmware
Ceiling microphone array - Dante
™
module: Audinate DANTE Broadway
Dante Firmware version 1.5.0 - Release Date 2022-09-01
For conformity, consistency and compatibility reasons, we strongly recommend upgrading the sys-
tem to the new release.
Update
•
Version alignment from 1.4.7 -> 1.5.0
Firmware Update
•
The Dante™ firmware update requires Audinate‘s Dante Controller software:
www.audinate.com/products/software/dante-controller
Previous Releases
Dante Firmware version 1.4.7 - Release Date 2021-11-01
•
Includes the new Audinate Dante Firmware v.4.2.6.4
•
Dante input channel was renamed to “FarEndRef”
•
Telnet/TFTP access was deactivated for security reasons
Dante Firmware version 1.3.0 - Release Date 2021-02-01
•
Dante output channel 1 “OUT” renamed to “MainOut”
•
Additional Dante output channel 2 “FarEndOut” added
This channel is intended for recording purposes or for far-end transmission of audio data that is
not processed by the voice lift algorithms.
Dante Firmware version 1.2.0 - Release Date 2020-05-13
•
Includes the new Audinate Dante Firmware v.4.2.4.2
•
Supports new Dante features like SMPTE 2110
•
Dante factory reset now also resets the TCC2 Dante network settings
Dante Firmware version 1.1.0 - Release Date 2019-08-30
•
Dante Model Name changed to “Sennheiser TCC2”
•
Additional Dante input channel enabled “AEC Ref” (AEC reference channel)
•
This update is necessary to make use of AEC Ref channel with TCC2 firmware ≥ v1.3.4