Sennheiser TeamConnect Ceiling 2 Release Notes - TeamConnect Ceiling 2 Firmwar
Sennheiser TeamConnect Ceiling 2 Manual
View all Sennheiser TeamConnect Ceiling 2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Sennheiser TeamConnect Ceiling 2 manual content summary:
- Sennheiser TeamConnect Ceiling 2 | Release Notes - TeamConnect Ceiling 2 Firmwar - Page 1
TeamConnect Ceiling 2 Release Notes TeamConnect Ceiling 2 Ceiling microphone array Firmware Update • The TeamConnect Ceiling 2 firmware update requires the Sennheiser Control Cockpit software: www.sennheiser.com/control-cockpit-software Firmware version 1.8.4 - Release Date 2022-12-15 For conformity - Sennheiser TeamConnect Ceiling 2 | Release Notes - TeamConnect Ceiling 2 Firmwar - Page 2
once after firmware 1.7.2 has been uploaded via Sennheiser Control Dante output level control (0dB to +24dB) • Dante output gain increased by +12dB (default) • Supports usage of external AEC Reference channel on Dante Input (requires TCC2 Dante firmware ≥ v1.1.0) TeamConnect Ceiling 2 Firmware - Sennheiser TeamConnect Ceiling 2 | Release Notes - TeamConnect Ceiling 2 Firmwar - Page 3
offset feature added Firmware version 1.1.0 - Release Date 2019-03-20 • LED colours for mic on, muted and custom state selectable • 10° static vertical exclusion zone • Audio performance for suspended installation improved for higher frequencies TeamConnect Ceiling 2 Firmware v1.8.4 | 3/3
TeamConnect Ceiling 2 Firmware v1.8.4 | 1/3
TeamConnect Ceiling 2
Release Notes
TeamConnect Ceiling 2
Ceiling microphone array
Firmware Update
•
The TeamConnect Ceiling 2 firmware update requires the Sennheiser Control Cockpit software:
www.sennheiser.com/control-cockpit-software
Firmware version 1.8.4 - Release Date 2022-12-15
For conformity, consistency and compatibility reasons, we strongly recommend upgrading the sys-
tem to the new release.
Features
•
Operating system has been updated to the latest patch level
•
Support for new hardware components integrated
Bugfixes
•
Fixed sporadic SSC anomalies with multiple Sennheiser Control Cockpit instances
Known Issues
•
When updating the firmware from version 1.6.5 or older to a newer version, TCC2 switches to
an internal update mode as soon as newer firmware has been uploaded via the Sennheiser
Control Cockpit. The individual LEDs will switch to “yellow” and “blue” for a few minutes while
the device is temporarily not visible in Control Cockpit. After the internal update, the device is
automatically reinitialized and reappears in the Control Cockpit.
Previous Releases
Firmware version 1.8.0 - Release Date 2021-11-01
•
Operating system has been updated to the latest patch level
•
SSC-TCP stack for processing single bytes and unclosed connection requests has been fixed
•
Dante network configuration can now be edited using the SSC protocol
•
Dante factory settings are now restored with a TCC2 factory reset via SSC and the reset button
•
Dante input channel was renamed to “FarEndRef”
(Requires TCC2 Dante firmware update to v.1.4.7 or higher)