Sennheiser TeamConnect Ceiling 2 Mounting and operating instructions TeamConne
Sennheiser TeamConnect Ceiling 2 Manual
View all Sennheiser TeamConnect Ceiling 2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Sennheiser TeamConnect Ceiling 2 manual content summary:
- Sennheiser TeamConnect Ceiling 2 | Mounting and operating instructions TeamConne - Page 1
TeamConnect Ceiling 2 Instruction manual Sennheiser electronic GmbH & Co. KG Am Labor 1, 30900 Wedemark, Germany, www.sennheiser.com Publ. 02/22 - Sennheiser TeamConnect Ceiling 2 | Mounting and operating instructions TeamConne - Page 2
- Sennheiser TeamConnect Ceiling 2 | Mounting and operating instructions TeamConne - Page 3
suspended from the ceiling 29 Mounting the TeamConnect Ceiling 2 on a VESA mount 31 Configuring the TeamConnect Ceiling 2 32 Downloading Sennheiser Control Cockpit 32 Configuring the TeamConnect Ceiling 2 with the Sennheiser Control Cockpit 32 Configuring the TeamConnect Ceiling 2 with a media - Sennheiser TeamConnect Ceiling 2 | Mounting and operating instructions TeamConne - Page 4
as a mobile version in the Documentation App: • Sennheiser website: www.sennheiser.com/tcc2 • Sennheiser documentation app: Accessible using the QR codes shown below Online instruction manual Sennheiser Documentation App www.sennheiser.com/download TeamConnect Ceiling 2 20 | TeamConnect Ceiling 2 - Sennheiser TeamConnect Ceiling 2 | Mounting and operating instructions TeamConne - Page 5
FR EN DE IT PT ES Package contents • TeamConnect Ceiling 2 • 3-pin Phoenix connector (3.81) • 8 self-adhesive rubber feet • 2 eye bolts (M4x10) • Instruction manual • Supplement sheet with manufacturer declarations Accessories SL CM FB Ceiling mounting frame M4x8 SL CM EB US Angle brackets (for - Sennheiser TeamConnect Ceiling 2 | Mounting and operating instructions TeamConne - Page 6
PoE/Ctrl socket 5 6 7 Dante™ interface with two RJ-45 sockets, Primary and Secondary • Supports redundancy and switched mode To restore the the TeamConnect Ceiling 2 via Power over Ethernet and configure it using the Sennheiser Control Cockpit software (see „Configuring the TeamConnect Ceiling - Sennheiser TeamConnect Ceiling 2 | Mounting and operating instructions TeamConne - Page 7
-e Ccodec Variant 3: output analog audio signal from multiple ceiling microphones to a single DSP. TeamConnect Ceiling 2 A TeamConnect Ceiling 2 B TeamConnect Ceiling 2 C TeamConnect Ceiling 2 D - - - Aanaloogges aAuuddiiookcaabbelel** DSP Aannaalloog es aAuuddioiockabelel* *The cable - Sennheiser TeamConnect Ceiling 2 | Mounting and operating instructions TeamConne - Page 8
The interface supports redundant output and series connection of multiple ceiling microphones (switched mode). The mode is configured using the Dante Domain Manager or Dante Controller from Audinate (www.audinate.com). Variant 1: output digital audio signal to one Dante™ network TeamConnect Ceiling - Sennheiser TeamConnect Ceiling 2 | Mounting and operating instructions TeamConne - Page 9
frame See „Accessories" on page 21 Accessories required: SL CM SK Ceiling suspension set See „Accessories" on page 21 Detailed installation instructions can be found in the section „Installing the TeamConnect Ceiling 2" on page 26. Adapting the installation height Observe the following minimum - Sennheiser TeamConnect Ceiling 2 | Mounting and operating instructions TeamConne - Page 10
to lights or other electrical devices in the ceiling. When mounting the unit in the ceiling, always additionally secure the TeamConnect Ceiling 2 against falling: a. by using the SLCMSK ceiling suspension kit (see "Variant 3 - suspended from the ceiling" on p. 13) or b. by using the safety ropes - Sennheiser TeamConnect Ceiling 2 | Mounting and operating instructions TeamConne - Page 11
) 590 mm 5 - 10 mm 5 - 10 mm f Remove a tile from the ceiling. f Place the TeamConnect Ceiling 2 in the frame in the coffered ceiling. f Maintain the distances indicated in the figure. Installing the TeamConnect Ceiling 2 in the ceiling with angle brackets (2 x 2 ft or 625 x 625 mm grid) 4x SL - Sennheiser TeamConnect Ceiling 2 | Mounting and operating instructions TeamConne - Page 12
10 mm 5 - 10 mm f Remove a tile from the ceiling. f Place the TeamConnect Ceiling 2 in the frame in the coffered ceiling. f Maintain the distances indicated in the figures. Variant 2: mounted directly below the ceiling M4x8 To mount the product directly below the ceiling, you need the SL CM FB - Sennheiser TeamConnect Ceiling 2 | Mounting and operating instructions TeamConne - Page 13
Do not screw the screw all the way in (see figure). Fastening the TeamConnect Ceiling 2 to the ceiling mounting frame 1 2 IT PT ES f As shown in the figure, hook the TeamConnect Ceiling 2 into the grooves in the ceiling mounting frame using the four M4x12 screws installed in the previous step - Sennheiser TeamConnect Ceiling 2 | Mounting and operating instructions TeamConne - Page 14
in the figure, screw the product fastener D into the threaded mounting hole on the top of the TeamConnect Ceiling 2. f Set the steel cable C to the desired length by using your finger to press the cable guide into the product fastener D and sliding the steel cable as needed. f Cut the excess steel - Sennheiser TeamConnect Ceiling 2 | Mounting and operating instructions TeamConne - Page 15
mount The SL CM VB VESA adapter (available separately) allows you to mount the TeamConnect Ceiling 2 on any 100 x 100 mm or 200 x 200 mm VESA mount. f Fasten the ceiling mount to the ceiling using suitable screws and anchors. f Observe the mounting specifications from the manufacturer. Proceed as - Sennheiser TeamConnect Ceiling 2 | Mounting and operating instructions TeamConne - Page 16
Configuring the TeamConnect Ceiling 2 Configuring the TeamConnect Ceiling 2 Downloading Sennheiser Control Cockpit To configure and use the TeamConnect Ceiling 2, you need the free Sennheiser Control Cockpit control software. You can download it here: www.sennheiser.com/control-cockpit-software To - Sennheiser TeamConnect Ceiling 2 | Mounting and operating instructions TeamConne - Page 17
the Sennheiser Control Cockpit, the TeamConnect Ceiling 2 can also be operated using a media control system. A media control system allows you to use a custom user interface with the following functions: f Control the mute function f Edit audio parameters (adjust output level, show microphone level - Sennheiser TeamConnect Ceiling 2 | Mounting and operating instructions TeamConne - Page 18
for Phoenix Contact MCVW 1.5-3-ST-3.81) Two Dante™ Digital Audio Network sockets (RJ-45) One microphone 160 Hz to 18,000 Hz 0 dBV/Pa (988 mV/Pa) 83 dB(A) 4 ms 11 dB(A) 28 Beam pattern 104 dB SPL 93 dB(A) Operation: Storage: 0 - 40°C -10 - 60°C 20 - 95%, non-condensing 34 | TeamConnect Ceiling
TeamConnect Ceiling 2
Sennheiser electronic GmbH & Co. KG
Am Labor 1, 30900 Wedemark, Germany, www.sennheiser.com
Publ. 02/22
Instruction manual