Sharp AL 1655CS AL-1655CS Operation Manual - Page 58
Repeat Steps 4 through 6 to link Button Manager to SC2, Sharp Button Manager
UPC - 074000074712
View all Sharp AL 1655CS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 58 highlights
SET UP THE SOFTWARE 5 Select "Start this program" and then select "Sharp Button Manager B" from the pull-down menu. 6 Click the "Apply" button. 7 Repeat Steps 4 through 6 to link Button Manager to "SC2:" through "SC6:". Select "SC2:" from the "Select an event" pull-down menu. Select "Start this program", select "Sharp Button Manager B" from the pull-down menu, and then click the "Apply" button. Do the same for each ScanMenu through "SC6:". When the settings have been completed, click the "OK" button to close the screen. Button Manager is now linked to the scan menu (1 through 6). The scan settings for each of scan menu 1 through 6 can be changed with the setting window of Button Manager. For the factory default settings of the scan menu, see "USING THE SCANNER MODE" (p.61). For the procedures for configuring Button Manager settings, see "Button Manager Settings" in the Online Manual. 56