Sharp AL 1655CS AL-1655CS Operation Manual - Page 68
dpi, HI-SPEED, NORMAL, Program, number, Program name, Setting codes, Explanation, KEY PRESS TIME
UPC - 074000074712
View all Sharp AL 1655CS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 68 highlights
USER SETTINGS Program number Program name 9 AE/TEXT RESOLUTION 10 2-SIDED COPY MODE 11 MARGIN WIDTH 12 MEM. FOR PRINTER 13 AUTO KEY REPEAT 14 KEY PRESS TIME 15 KEY TOUCH SOUND Setting codes (factory default setting appears in bold) 1: 300dpi 2: 600dpi 1: HI-SPEED 2: NORMAL 1: 1/4" 2: 1/2" 3: 3/4" 4: 1" 1: 30% 2: 40% 3: 50% 4: 60% 5: 70% 1: ON 2: OFF 1: NORMAL 2: 0.5 SEC. 3: 1.0 SEC. 4: 1.5 SEC. 5: 2.0 SEC. 1: LOW 2: HIGH 3: OFF Explanation • This setting is used to change the copy resolution in AUTO and TEXT mode from 600 x 300 dpi to 600 x 600 dpi (highquality mode). Scanning is slower when high-quality mode is used. • If the memory fills up when two-sided copying is performed, "NORMAL" can be selected to make copying possible. However, "NORMAL" results in a slower copying speed. Normally "HISPEED" is selected to enable fast two-sided copying. • Use this setting to set the margin width. • Use this to change the proportion of machine memory used for printer mode. • Use this setting to select whether or not holding down a key causes repeated input of the key. For keys that normally cause a set value to decrease or increase when held down (for example, the [ ] key ( ) or [ ] key ( )), this program can be used to have the set value not change when the key is held down. • Use this setting to select how long a key must be pressed for the input to be accepted. By selecting a longer time, you can prevent settings from being changed by the accidental pressing of a key. • This sets the volume of beep signals. (p.70) 66