Sharp AL 1655CS AL-1655CS Operation Manual - Page 73
Display Messages - error codes
UPC - 074000074712
View all Sharp AL 1655CS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 73 highlights
8 Chapter 8 TROUBLESHOOTING AND MAINTENANCE Problems related to general use of the machine, the copy function, and software setup are explained here. Be sure to check the problem carefully before calling for service, as many problems can be solved by the user. If you are unable to solve the problem, turn off the main switch, unplug the power cord from the outlet, and contact our Technical Assistance Department at 1(630)378-3590 in the USA or 905-568-7140 in Canada. Note For problems related to the printer and scanner functions, see the corresponding operation manuals. DISPLAY MESSAGES When the following indicators light up or blink on the operation panel or the following alphanumeric codes appear in the display, solve the problem immediately referring to both the table below and the indicated page. Note Be sure to use only genuine SHARP parts and supplies. Indication Lamp indicator Display Cause and remedy Page BYPASS : ADD PAPER Tray location Blinks indicator TRAY : ADD PAPER The indicated paper tray is not closed, is closed incorrectly, or has run out of paper. (The tray is indicated.) 19 CLOSE PAPER TRAY CLEAR PAPER A paper misfeed has occurred. JAM Remove the misfeed as explained in 80 SPF/RSPF JAM. "MISFEED REMOVAL". FRONT OR SIDE COVER OPEN. The cover is open. Close the cover. - CLOSE COVERS. CLOSE THE SPF/ The RSPF cover is open. Close the RSPF RSPF COVER. cover. 83 Error indicator Blinks REPLACE THE TD The TD cartridge is empty. Replace the CARTRIDGE. TD cartridge with a new cartridge. When [L1-00] appears, the scan head locking switch is locked. Turn off the power, release the scan head locking 85 13 switch, and turn the power back on. SYSTEM ERROR [XX - XX] REFER TO USER GUIDE The machine will not function. Turn the power switch off, wait about 10 seconds, and then turn on the switch again. If this does not clear the error, remove the power cord from the outlet, and contact - our Technical Assistance Department at 1-(630)378-3590 in the USA or 905-568- 7140 in Canada. 8 71