Sharp AR-F14 AR-F14 Saddle-Stitch Finisher Operation Manual
Sharp AR-F14 Manual
 |
View all Sharp AR-F14 manuals
Add to My Manuals
Save this manual to your list of manuals |
Sharp AR-F14 manual content summary:
- Sharp AR-F14 | AR-F14 Saddle-Stitch Finisher Operation Manual - Page 1
MODEL AR-F14 SADDLE STITCH FINISHER OPERATION MANUAL Page • SADDLE STITCH FINISHER 1 • PARTS OF THE SADDLE STITCH FINISHER 1 • SPECIFICATIONS 2 • THE STAPLE CARTRIDGE AND REMOVING STAPLE JAMS 8 • REMOVING PAPER MISFEEDS 11 • TROUBLESHOOTING 14 • USING THE KEY OPERATOR PROGRAMS 15 - Sharp AR-F14 | AR-F14 Saddle-Stitch Finisher Operation Manual - Page 2
. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the operation manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in - Sharp AR-F14 | AR-F14 Saddle-Stitch Finisher Operation Manual - Page 3
stitch finisher. Detach button Press this button when a paper misfeed or other problem occurs to detach the saddle stitch finisher from the machine. • Do not screens, messages, and key names shown in this manual may differ from the actual screens, messages, and key names due to modifications made - Sharp AR-F14 | AR-F14 Saddle-Stitch Finisher Operation Manual - Page 4
) Approx. 101.4 lbs. (46 kg)(finisher: 86 lbs. (39 kg), joint: 15.4 lbs. (7 kg)) Name Punch module Model*1 AR-PN1A AR-PN1B*2 AR-PN1C*3 AR-PN1D*3 Number of holes 2 3 or 2 4 4 Paper sizes for hole punching 11" x 17", 8-1/2" x 14", 8-1/2" x 13", 8-1/2" x 11", 8-1/2" x 11"R, A3, B4 - Sharp AR-F14 | AR-F14 Saddle-Stitch Finisher Operation Manual - Page 5
Supplies The following staple cartridge is required as a supply for the saddle stitch finisher: G AR-SC2 Staple Cartridge (approx. 5000 staples x 3) FUNCTIONS OF THE SADDLE STITCH FINISHER I Sort function each sheet of paper for easy creation of a pamphlet (See the operation manual for copier). 3 - Sharp AR-F14 | AR-F14 Saddle-Stitch Finisher Operation Manual - Page 6
I Punch function (only when a punch unit is installed) When an optional punch unit is installed on the saddle stitch finisher, holes can be punched in the output. Punched output is delivered to the offset tray. The punch function cannot be used in combination with the saddle stitch (pamphlet - Sharp AR-F14 | AR-F14 Saddle-Stitch Finisher Operation Manual - Page 7
is stapled along the centerline of the paper and folded. When this function is selected, the pamphlet copy function (page 45 of operation manual for copier) is automatically selected. Note When "AUTOMATIC SADDLE STITCH" is disabled in the key operator programs, the "PAMPHLET COPY" is automatically - Sharp AR-F14 | AR-F14 Saddle-Stitch Finisher Operation Manual - Page 8
, as shown at right. • When the staple sort or punch function is used, the automatic original image rotation function does not operate. lower left staple SHARP SHARP 6 - Sharp AR-F14 | AR-F14 Saddle-Stitch Finisher Operation Manual - Page 9
number of pages that can be scanned into memory, increase the memory allocation in the key operator programs or install more memory. (See "Key operator's guide".) CENTER TRAY SADDLE STITCH OK PUNCH 6 Select the number of copies and other copy settings, and touch the [START] key ( ). 7 - Sharp AR-F14 | AR-F14 Saddle-Stitch Finisher Operation Manual - Page 10
REPLACING THE STAPLE CARTRIDGE AND REMOVING STAPLE JAMS A message will appear in the display when the staple cartridge needs replacement or a staple jam occurs. Follow the procedures below to replace the cartridge or remove the jam. I Replacing the staple cartridge 1 Open the front cover. 6 - Sharp AR-F14 | AR-F14 Saddle-Stitch Finisher Operation Manual - Page 11
I Removing a staple jam 1 Press the detach button and separate the saddle stitch finisher from the machine. 6 Remove any misfed paper. Remove the paper gently without tearing it. Caution The saddle stitch finisher and the machine are connected at the rear. Exercise caution when pulling them apart - Sharp AR-F14 | AR-F14 Saddle-Stitch Finisher Operation Manual - Page 12
11 Raise the lever on the front edge of the staple box. If the leading staple is bent, be sure to cut it off. If a bent staple is used for stapling, a staple jam will result. 13 Push in the staple box. Push the staple box all the way in until you hear a "click". 12 Replace the front edge lever. - Sharp AR-F14 | AR-F14 Saddle-Stitch Finisher Operation Manual - Page 13
and picture will appear in the display of the operation panel as shown below and copying will automatically stop. Follow the procedures below to remove the misfeed. A MISFEED HAS OCCURRED. INFORMATION Note When a misfeed occurs, you can touch the [INFORMATION] key to display brief instructions for - Sharp AR-F14 | AR-F14 Saddle-Stitch Finisher Operation Manual - Page 14
I Misfeed in the saddle stitch finisher 1 Press the detach button and separate the saddle stitch finisher from the machine. 5 Remove the misfed paper. Remove the paper gently, taking care not to tear it. Caution The saddle stitch finisher and the machine are connected at the rear. Exercise - Sharp AR-F14 | AR-F14 Saddle-Stitch Finisher Operation Manual - Page 15
10 Open the front cover. 15 Push the saddle stitch finisher back onto the machine. 11 Rotate roller rotating knob D in the direction of the arrow. Roller rotating knob D 12 Remove any misfed paper from the saddle stitch tray. Remove the paper gently, taking care not to tear it. 13 Close the cover - Sharp AR-F14 | AR-F14 Saddle-Stitch Finisher Operation Manual - Page 16
check the following troubleshooting guide before calling for service. Many problems can be resolved by the user. Problem Stapling position the saddle stitch finisher is open. Close all covers. A message appears instructing you to remove paper from the stapler compiler. Remove all paper that remains - Sharp AR-F14 | AR-F14 Saddle-Stitch Finisher Operation Manual - Page 17
"USING THE KEY OPERATOR PROGRAMS", see page 2 of the "Key operator's guide" that comes with the machine. I Added programs The following two programs are added to "DEVICE CONTROL" (page 12 of the "Key operator's guide"): Disabling of finisher This program is used to prohibit use of the saddle - Sharp AR-F14 | AR-F14 Saddle-Stitch Finisher Operation Manual - Page 18
AR-F14 SHARP CORPORATION Printed on 100% post-consumer recycled paper PRINTED IN JAPAN 2004C DSC1 TINSEXXXXQSZZ
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
 |
 |
MODEL
AR-F14
SADDLE STITCH FINISHER
OPERATION MANUAL
•
SADDLE STITCH FINISHER
•
PARTS OF THE SADDLE
STITCH FINISHER
•
SPECIFICATIONS
•
FUNCTIONS OF THE SADDLE
STITCH FINISHER
•
USING THE SADDLE STITCH
FINISHER FUNCTIONS
•
USING THE SADDLE STITCH
FINISHER TO MAKE COPIES
•
REPLACING THE STAPLE CARTRIDGE
AND REMOVING STAPLE JAMS
•
REMOVING PAPER MISFEEDS
•
TROUBLESHOOTING
•
USING THE KEY OPERATOR
PROGRAMS
1
1
2
3
5
6
8
11
14
15
Page