Sharp AS271F pdf
Sharp AS271F Manual
 |
View all Sharp AS271F manuals
Add to My Manuals
Save this manual to your list of manuals |
Sharp AS271F manual content summary:
- Sharp AS271F | pdf - Page 1
User's Manual Desktop Monitor AccuSync AS271F MODEL: AS271F / AS271F-BK The regulations for this monitor applied to one of model names listed above. Please find your model name on the label on the rear side of the monitor. - Sharp AS271F | pdf - Page 2
Changing the Input 22 Power management function LED indicator patterns 22 Chapter 3 Troubleshooting Screen Image and Video Signal Issues 24 Hardware Issues 25 Image Persistence 25 Chapter 4 Specifications AS271F 27 Appendix A OSD Controls List Picture 29 Sound 29 Setup 30 Information - Sharp AS271F | pdf - Page 3
read carefully in order to avoid any problems. Plug Type North America European Continental being used. NOTE: This product can only be serviced in the country where it was purchased. • The intended . (4) The image shown in this user's manual is indicative only. If there is inconsistency between - Sharp AS271F | pdf - Page 4
Solutions of America, Inc. in this manual. Failure to comply with this government regulation in accordance with the instructions, may cause harmful interference and Resolve Radio-TV Interference Problems." This booklet is available B Peripheral Model: AS271F (AS271F / AS271F-BK) CAUTION: - Sharp AS271F | pdf - Page 5
SETTING UP AND USING THE LCD COLOR MONITOR: About the Symbols To ensure safe and proper use of the product, this manual uses a number of symbols you to electric shock, fire, or other risks. Refer all servicing to qualified service personnel. 2 DO NOT DISASSEMBLE PROHIBITED Do not use the product - Sharp AS271F | pdf - Page 6
causing personal injury or damage to the product. Please refer to the instructions included with the optional mounting equipment for detailed information about attaching or or position not described in the user's manual. Please check the Specifications for the available Tilt range when installing - Sharp AS271F | pdf - Page 7
mounted to an approved flexible arm (e.g. TUEV GS mark) or stand that supports the weight of the product to prevent damage and personal injury that could attached to the floor/ wall in accordance with the installation instructions. Many injuries, particularly to children, can be avoided by taking - Sharp AS271F | pdf - Page 8
or use your product near water. 11 Immediately turn off the power and unplug your product from the wall outlet, then refer servicing to DO NOT WET qualified service personnel. It may cause an electric shock or start a fire. Do not use flammable gas sprays to remove dust when cleaning the - Sharp AS271F | pdf - Page 9
not push the product. 5 The product may fall, causing damage to the product or personal injury. PROHIBITED Do not impact the LCD panel surface, it can cause serious damage to the product or personal 6 injury. PROHIBITED Suitable for entertainment purposes at controlled luminous environments - Sharp AS271F | pdf - Page 10
CAUTION Do not connect headphones to the product while you are wearing them. 8 Depending on the volume level, it may damage your ears and cause loss of hearing. PROHIBITED Do not play with the plastic bag which covers the product. 9 PROHIBITED Do not use this bag for any other purpose. To - Sharp AS271F | pdf - Page 11
English Image Persistence Image persistence occurs when a residual or "ghost" image of a previous image remains visible on the screen. Unlike CRT monitors, LCD monitors' image persistence is not permanent, but a still image being displayed for a long period of time should be avoided. To alleviate - Sharp AS271F | pdf - Page 12
. Get regular eye checkups. • To avoid eye fatigue, adjust the brightness to a moderate setting. Place a sheet of white paper next to the LCD screen for luminance reference. • Do not position the Contrast control to its maximum setting. • Use the preset Size and Position controls with standard - Sharp AS271F | pdf - Page 13
system facilitates setup and installation by allowing the monitor to send its capabilities (such as screen size and resolutions supported) directly to your computer, automatically optimizing display performance. • Intelligent Power Manager System Provides innovative power-saving methods that allow - Sharp AS271F | pdf - Page 14
Chapter 1 Installation This Chapter Includes: >> "Parts Name and Functions" on page 13 >> "Connections" on page 15 >> "Setup" on page 16 >> "Flexible Arm Installation" on page 18 English−12 - Sharp AS271F | pdf - Page 15
Parts Name and Functions Control Panel English 6 5 4 3 21 Item 1 LED 2 Power 3 EXIT button 4 UP button 5 DOWN button 6 ENTER button Function Indicates that the power is on. Turns the monitor on and off. When the OSD menu is closed, it opens the VIDEO INPUT menu (When selecting AUTO input, the - Sharp AS271F | pdf - Page 16
measure, you can secure the monitor to a fixed object with an optional security cable. Please follow the security cable supplier's recommended instructions to install. NOTE: A security cable (purchased separately) is designed as a deterrent, it is not guaranteed to prevent the device from being - Sharp AS271F | pdf - Page 17
. The following table shows the typical factory preset signal timing for each connection type. Some display cards may not be able to support the required resolution for proper image reproduction with the selected connection. The monitor will show the proper image by automatically adjusting the - Sharp AS271F | pdf - Page 18
on again. Setup For box contents, please refer to the setup manual provided in the box. The accessories included depends on the location where the monitor was shipped. To attach the base stand to the LCD monitor stand: 1. Place the monitor face down on a non-abrasive surface. - Sharp AS271F | pdf - Page 19
to your system, follow these instructions: NOTE: Make sure may result in irregular operation, damage display quality/components of the LCD module and/or shorten the module's life. 4. Connect the problems please refer to the Troubleshooting section of this User's Manual (see page 23). English−17 - Sharp AS271F | pdf - Page 20
with a flexible arm. Contact us for more information. Follow the instructions provided by the manufacturer of the display mount. Remove the monitor the monitor must be mounted to an arm that supports the weight of the monitor. See the Specifications - "AS271F" on page 27 for details. Remove the - Sharp AS271F | pdf - Page 21
English Mount the Flexible Arm Using four screws that meet the specifications listed below, attach the arm to the monitor. 100 mm Washer Mounting Bracket Unit Screw (M4) Thickness of bracket and washer 6 - 10 mm 100 mm Figure F.1 CAUTION: • The monitor should only be used with an approved - Sharp AS271F | pdf - Page 22
Chapter 2 Basic Operation This Chapter Includes: >> "Using the OSD (On-Screen Display) Controls" on page 21 >> "Changing the Input" on page 22 >> "Power management function LED indicator patterns" on page 22 English−20 - Sharp AS271F | pdf - Page 23
available in the OSD menu are located in "Appendix A OSD Controls List" on page 28. PICTURE: Select one of the default picture modes, or manually adjust the color settings. SOUND: Select audio source and adjust volume. SETUP: Set the OSD language, time, position, and response. INFORMATION: Shows the - Sharp AS271F | pdf - Page 24
produced Blu-rays and DVDs, television broadcast, and streaming media services. Power management function LED indicator patterns The power management function is to the monitor. • This function works with computers that support VESA approved DPM (Display Power Management). English−22 - Sharp AS271F | pdf - Page 25
English Chapter 3 Troubleshooting This Chapter Includes: >> "Screen Image and Video Signal Issues" on page 24 >> "Hardware Issues" on page 25 >> "Image Persistence" on page 25 English−23 - Sharp AS271F | pdf - Page 26
that a supported resolution has been selected on the display card or system being used. If in doubt, please refer to the user's manual of the the signal cable is fully connected to the monitor and the computer. • LCD brightness degradation occurs due to long-term usage or extreme cold conditions. • - Sharp AS271F | pdf - Page 27
if [VOLUME] is set to a minimum. • Check to see if the computer supports an audio signal through DisplayPort or HDMI. • Check selected [SOUND INPUT] when DisplayPort on the screen. Unlike CRT monitors, the image persistence on LCD monitors is not permanent, but single still image being displayed for - Sharp AS271F | pdf - Page 28
Chapter 4 Specifications This Chapter Includes: >> "AS271F" on page 27 English−26 - Sharp AS271F | pdf - Page 29
Monitor Specifications AccuSync AS271F LCD Module Diagonal: 68.58 cm / 27 inches Viewable Image Size: 68.58 cm / 27 inches Native Resolution: 1920 x 1080 60 Hz Notes Active matrix; thin film transistor (TFT) liquid crystal display (LCD); 0.311 mm dot pitch; 250 cd/m2 white luminance; 1000 - Sharp AS271F | pdf - Page 30
Appendix A OSD Controls List This Chapter Includes >> "Picture" on page 29 >> "Sound" on page 29 >> "Setup" on page 30 >> "Information" on page 30 Default values can be provided on request. English−28 - Sharp AS271F | pdf - Page 31
(Analog input only) Controls the horizontal position of the image within the display area of the LCD. V POSITION (Analog input only) Controls the vertical position of the image within the display area of the LCD. CLOCK (Analog input only) Press UP button to expand the width of the image on the - Sharp AS271F | pdf - Page 32
Setup Setup Menu EXPANSION FULL ASPECT RESPONSE IMPROVE LANGUAGE POWER INDICATOR QUICK START OSD TURN OFF OSD LOCK OUT FACTORY RESET Sets the Zoom method. The image is expanded to full screen regardless of the resolution. The image is expanded without changing the aspect ratio. May reduce blurring - Sharp AS271F | pdf - Page 33
English Appendix B Manufacturer's Recycling and Energy Information This Chapter Includes: >> "Disposing of your old NEC product" on page 32 >> "Energy Saving" on page 32 We are strongly committed to environmental protection and sees recycling as one of the company's top priorities in trying to - Sharp AS271F | pdf - Page 34
Disposing of your old NEC product The aim of recycling is to gain an environmental benefit by means of re-use, upgrading, reconditioning or reclamation of material. Dedicated recycling sites ensure that environmentally harmful components are properly handled and securely disposed. To ensure the best
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
-
26
-
27
-
28
-
29
-
30
-
31
-
32
-
33
-
34
 |
 |
User’s Manual
Desktop Monitor
AccuSync AS271F
MODEL: AS271F / AS271F-BK
The regulations for this monitor applied to one of model names listed above.
Please find your model name on the label on the rear side of the monitor.