Sharp CD-DH950P CD-DH950P Operation Manual - Page 5

System connections (continued) Make sure to unplug the AC power cord before making any connections. TV Plug in with the lever side facing to the top. Wire AC outlet (AC 120 V ~ 60 Hz) To video input jack Video cable (not supplied) FM antenna External FM antenna for better reception (not supplied) AM loop antenna Remote control Q Battery installation Use 1 "AA" size battery (UM/SUM-3, R6, HP-7 or similar). Battery is not included. 1 Open the battery cover. 2 Insert the battery according to the direction indicated in the battery compartment. When inserting or removing the battery, push it toward the battery terminal. 3 Close the battery cover. Caution: O Remove the battery if the unit will not be used for a long period of time. This will prevent potential damage due to battery leakage. O Do not use rechargeable batteries (nickel-cadmium battery, etc.). O Installing the battery incorrectly may cause the unit to malfunction. O Batteries (battery pack or batteries installed) shall not be exposed to excessive heat such as sunshine, fire or the like. Notes concerning use: O Replace the battery if the operating distance is reduced or if the operation becomes erratic. O Periodically clean the transmitter on the remote control and the sensor on the unit with a soft cloth. O Exposing the sensor on the unit to strong light may interfere with operation. Change the lighting or the direction of the unit. O Keep the remote control away from moisture, heat, shock, and vibrations. E-4