Sharp DX-B350P DX-B350P DX-B450P Operation Manual - Page 35
Serial Setup, Menu Item, Value, Default, Description, When Interpreter setting is Auto Switch - rating
View all Sharp DX-B350P manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 35 highlights
Menu Item Delay Out Close Value On/Off Default Off Binary PS Serial Setup Interpreter Format On/Off On Auto Switch PCL PostScript 3 Raw Normal Binary Auto Switch Raw Serial Mode Baud Rate Data Bits Stop Bits Parity DTR Ready/Busy RS232 RS422 RS232 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200 9600 8, 7 8 1, 2 1 None Even Odd None On/Off Off DTR On1/Off1 On/Off Off DTR Error On/Off Off RTS Ready/Busy On/Off Off Operator Panel Menus Operator Panel Description When ON, the printer will wait until the job is completely printed and delivered to the output tray before terminating the connection, allowing all reverse-channel data to be sent back to the host. This will cause a reduction in printer throughput. When OFF, reverse-channel data generated after the job interpretation is discarded. No reduction in printer throughput occurs. When On, the feature allows all binary codes to be processed by the PostScript interpreter. When Off, special binary control codes may be intercepted per the Format item setting. Submenu Configures how incoming print jobs are scanned for special binary control codes. RAW=no processing Normal = "Adobe Standard Protocol" (ASP) Binary = "Binary Control Protocol" (BCP) When Interpreter setting is Auto Switch and this setting is Raw, the printer will automatically determine the control code method, defaulting to Normal if no codes are found. Serial mode Serial baud rate Serial data bits Serial stop bits Serial parity If On, the DTR signal will reflect the Ready/ Busy status. If On, the DTR signal will reflect the Online/ Offline status. If On, the DTR signal will reflect the Error status. If On, the RTS signal will reflect the Ready/ Busy status. User's Guide 3-9