Sharp DX-B350P DX-B350P DX-B450P Operation Manual - Page 36
Network 1 Setup, Menu Item, Value, Default, Description
View all Sharp DX-B350P manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 36 highlights
Operator Panel Menus Operator Panel Menu Item RTS On1/Off1 Value On/Off RTS Error On/Off XON Ready/Busy On/Off XON On1/Off1 On/Off XON Error On/Off DTR Polarity RTS Polarity Robust XON Delay Out Close High Low High Low On/Off On/Off Default Off Off On On Off High High Off Off Binary PS On/Off On ETX/ACK Network 1 Setup Interpreter Format On/Off Off Auto Switch PCL PostScript 3 Raw Normal Binary Auto Switch Raw Description If On, the RTS signal will reflect the Online/ Offline status. If On, the RTS signal will reflect the Error status. If On, the XON response will reflect the Ready/Busy status. If On, the XON response will reflect the Online/Offline status. If On, the XON response will reflect the Error status. Polarity for DTR Polarity for RTS Send Multiple XON codes. When ON, the printer will wait until the job is completely printed and delivered to the output tray before terminating the connection, allowing all reverse-channel data to be sent back to the host. This will cause a reduction in printer throughput. When OFF, reverse-channel data generated after the job interpretation is discarded. No reduction in printer throughput occurs. When On, the feature allows all binary codes to be processed by the PostScript interpreter. When Off, special binary control codes may be intercepted per the Format item setting. This submenu allows you to set up the Network interface. Configures how incoming print jobs are scanned for special binary control codes. RAW=no processing Normal = "Adobe Standard Protocol" (ASP) Binary = "Binary Control Protocol" (BCP) When Interpreter setting is Auto Switch and this setting is Raw, the printer will automatically determine the control code method, defaulting to Normal if no codes are found. 3-10 User's Guide