Sharp DX-B350P DX-B350P DX-B450P Operation Manual - Page 41
System Menu - cartridge
View all Sharp DX-B350P manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 41 highlights
Operator Panel Menus Operator Panel System Menu The System menu allows you to specify system-level operation of the printer during normal and certain error conditions. Items available in this menu are described below Menu Item Factory Defaults Save Config Restore Config Toner Low Display Language Power Save Wait Timeout Value U.S. Non-U.S. Default U.S. for 110V Non-U.S. for 230V Stop Stop Continue English Francais Deutsch Italiano Espanol Dutch Danish Norwegian Swedish 3-120 English 15 00000 - 99999 00020 Description Resets the menu to factory defaults. You change these defaults by changing the options in the Operator Panel; however, settings in the driver will override Operator Panel settings. Saves current configuration. Restores configuration. Stop printing or Continue printing when the Toner Low message is first displayed. When the print cartridge is low on toner, the Operator Panel displays this message. The printer normally has about 500 pages left to print before the print density fades. In its default state, the printer will stop printing when it detects the toner is low. You can continue printing by pressing the START/ STOP button. The printer will then continue printing indefinitely without operator intervention, even if it runs out of toner. The warning message remains displayed on the Operator Panel. If the printer is set to Continue after Toner Low, the printer will not stop and will continue to print even with no toner available. Change the language of the display messages. Set the time in minutes since last print before entering Power Save mode. See "Power Save Mode" on page 2-17 for more information. Increase or decrease the length of time (in seconds) that the printer will remain in the waiting state-a job is being processed, no end-of-file has been detected, and there is no more data to process. This setting applies to both PCL and PostScript print jobs. User's Guide 3-15