Sharp DX-B351PL DX-B351PL User Manual

Sharp DX-B351PL Manual

Sharp DX-B351PL manual content summary:

  • Sharp DX-B351PL | DX-B351PL User Manual - Page 1
    User Guide SHARP DX-B351PL Monochrome Laser Printer It is recommended that you read this Guide carefully before using the printer.
  • Sharp DX-B351PL | DX-B351PL User Manual - Page 2
    Guide is owned by its respective companies in accordance with their licensing agreements and are referenced for instruction only. All other product names and trademark or service follow this User Guide. Except the express warranty made in the product maintenance manual or service commitment, HCS
  • Sharp DX-B351PL | DX-B351PL User Manual - Page 3
    Safety Precautions Laser Safety Laser radiation is harmful to the human body. Since laser components are completely sealed in the printer, laser radiation will not leak. To avoid laser radiation, please do not randomly disassemble the printer! The printer follows the provisions of Class 1 laser
  • Sharp DX-B351PL | DX-B351PL User Manual - Page 4
    and instructions marked on the equipment or specified in the manual supplied with the equipment. 4. If the operating instructions conflict mentioned in the instructions. Incorrect adjustment of other controls may result in damage and the need for professional service representative support. 15. To
  • Sharp DX-B351PL | DX-B351PL User Manual - Page 5
    is inconsistent with the package list, please go to the specified Service Center to solve the problem. 24. Install this product in a place where the temperature not installed and used in accordance with the instructions, may cause harmful interference to radio communications. User Guide properly. IV
  • Sharp DX-B351PL | DX-B351PL User Manual - Page 6
    Legal Information Products that have earned the ENERGY STAR® are designed to protect the environment through superior energy efficiency. Supplier's Declaration of Conformity 47 CFR § 2.1077 Compliance Information Unique Identifier: Trade Name: Sharp, Model No.: DX-B352P Responsible Party - U.S.
  • Sharp DX-B351PL | DX-B351PL User Manual - Page 7
    Driver installation ...18 3.3.Add printer to Mac system...20 4. Wired network setup...21 4.1. Set IP Address ...21 4.1.1. Automatic Setting...21 4.1.2. Manual Setting ...21 5.Web server ...22 5.1. Visit the embedded Web server ...22 5.2. Use Web server to manage printer...22 5.2.1.IP address setup
  • Sharp DX-B351PL | DX-B351PL User Manual - Page 8
    of auto feed tray ...49 9.1.2. Paper jam of manual feed tray ...50 9.1.3. Middle jam...51 9.1.4. Paper Jam in the Fuser Unit ...53 9.1.5. Duplex Unit Jam ...54 9.2. Software Failure ...55 9.3. Common Troubleshooting ...56 9.3.1. Common Problems ...56 9.3.2. Image Defects...57 1O.Menu Structure ...60
  • Sharp DX-B351PL | DX-B351PL User Manual - Page 9
    parameters USB • Interface Type NET • Print Language PDL • Control Panel LCD • A4 33ppm • Print Speed Letter 35ppm • Automatic Two-Sided Printing • Mute Printing • (●: Support; Blank: Unsupport) This product series is subject to additions or changes without prior notice. 1
  • Sharp DX-B351PL | DX-B351PL User Manual - Page 10
    1.2. Supplied Accessories Name Parts Toner cartridge Drum component USB Interface Cable Power Cord CD-ROM 2
  • Sharp DX-B351PL | DX-B351PL User Manual - Page 11
    Tray Prevents the printed paper from falling. 4 Front Cover Open the front cover to take out the laser toner cartridge. 5 Manual feed tray Place mediums to be printed in manual feed tray. 6 Power switch Turn the power on or off and press this button under Ready state to enter energy-saving
  • Sharp DX-B351PL | DX-B351PL User Manual - Page 12
    9 Paper width deflector of auto feed tray Slide paper width deflector to adapt to paper width. 10 Paper length deflector of auto feed tray Clip of extended tray of 11 auto feed tray Slide paper length deflector to adapt to paper length. Adjustment of length extension of the tray. Rear View 1
  • Sharp DX-B351PL | DX-B351PL User Manual - Page 13
    life of drum component Type Longevity of drum component Average Print Volume About 12000 Pages (Based on ISO 19752 standard) Service life of toner cartridge Type Standard-volume toner cartridge High-volume toner cartridge Average Print Volume About 1500 Pages (Based on ISO 19752 standard
  • Sharp DX-B351PL | DX-B351PL User Manual - Page 14
    1.5. Control Panel 1.5.1.0 Overview of control panel The layout of the printer control panel is shown below: LCD control panel No. Name 1 LCD Display Save toner 2 indicator Functions Display operation interface and product information Indicate the on/off of save toner function(Please refer to
  • Sharp DX-B351PL | DX-B351PL User Manual - Page 15
    7 Down 8 Back Scroll down through the menus and options. Shift the entry positions from left to right, for example, to input IP address entry. Return to the previous menu. 9 save toner key Open save toner function. 10 Cancel Exit operation. 7
  • Sharp DX-B351PL | DX-B351PL User Manual - Page 16
    1.5.2. Indicator function of control panel Display meanings of save toner indicator are as follows: Save No. toner indicator Status Status description Turn save toner 1 Die out state function and sleep mode 2 Blue indicator None blinks 3 Blue indicator Turn on save normally on toner
  • Sharp DX-B351PL | DX-B351PL User Manual - Page 17
    4 Orange indicator blinks Low toner warning Toner cartridge error 5 Orange indicator (uninstalled ink cartridge, normally on non-matching ink cartridge, invalid toner cartridge) Printer errors such as 6 Red indicator normally on paper error (paper out, paper jam, paper feed failure),
  • Sharp DX-B351PL | DX-B351PL User Manual - Page 18
    (28 lb. bond- 74 lb. cover), transparent film, carton paper, label paper, envelope Manual feed tray Media size A4, Letter, Legal, Folio, Oficio, Statement, Executive, JIS B5, affect the service life of the printer. • The print media that does not meet the guidelines listed in this User Guide may
  • Sharp DX-B351PL | DX-B351PL User Manual - Page 19
    purchasing large quantities of print media, make sure that the print media meets the specifications specified in this User Guide. 2.2. Special Paper This printer supports using the special paper for printing. Special paper includes: label paper, envelope, transparent film, thick paper, carton paper
  • Sharp DX-B351PL | DX-B351PL User Manual - Page 20
    to the slot suitable for paper size, in order to match paper length and width. Note: • Do not overly squeeze the "paper length guide" and "paper width guide", otherwise it could lead to deformation of paper. 3. Before loading paper, please unfold the stacked paper to avoid a paper jam or feed error
  • Sharp DX-B351PL | DX-B351PL User Manual - Page 21
    failure. • If carrying out single-sided printing, please make sure that the side to be printed (the blank side) is face down. 2.3.2. Install manual feed tray 1. Raise the output tray to avoid the printed paper from slipping and falling, or immediately remove the printed document after the printing
  • Sharp DX-B351PL | DX-B351PL User Manual - Page 22
    piece after finishing printing. • Put the printing medium inside the manual feed tray with the printing side up; the top of paper . Slow action will lead to the prompt of paper out or paper failure of manual feed tray. After paper is put inside, printing will be resumed automatically; too quick
  • Sharp DX-B351PL | DX-B351PL User Manual - Page 23
    2.4. Non-printable Area The shaded area indicates the non-printable area. Usage Paper Size Top and bottom margins (A) Left and right margins (B) Printing A4 Letter 5mm(0.197inch) 5mm(0.197inch) 5mm(0.197inch) 5mm(0.197inch) 2.5. Paper application rules • Rough textured, uneven, oil stained and
  • Sharp DX-B351PL | DX-B351PL User Manual - Page 24
    3.Driver installation and uninstallation 3.1. Driver installation based on Windows system • Before installing the drive, you need to learn about printer model by printing the printer information page out and checking the product name (please refer to Chapter 7.4 for printing methods). • In case of a
  • Sharp DX-B351PL | DX-B351PL User Manual - Page 25
    3.1.2. Installation via wired network connection 1. Turn the on the power on the printer and computer. 2. Connect the computer to wired network. 3. Connect network cable to the network interface of printer, to make sure the printer is connected to computer network (please refer to Chapter 4 for
  • Sharp DX-B351PL | DX-B351PL User Manual - Page 26
    from the list with a hostname". • If IP address or host name is added manually, you need to know the IP address of the printer connected or host name. model. 3. Click uninstall to delete the driver according to instructions on uninstall window. 4. Restart computer after finishing unloading. 3.2.
  • Sharp DX-B351PL | DX-B351PL User Manual - Page 27
    3. Click "Continue". 4. Read licensing agreement and then click "Continue". 5. Click "Agree" on the prompt window popping out to accept the licensing agreement. 6. Click "Install". 7. Input computer password and click "Install Software". 8. Click "Continue Installation" on the prompt window popping
  • Sharp DX-B351PL | DX-B351PL User Manual - Page 28
    3.3. Add printer to Mac system 3.3.1. Add in USB connection mode 1. Connect the printer to computer with USB cable and then turn power on. 2. Enter the "System Preferences" - "Printers & Scanners" of computer. 3. Click button to select "Add Printer or Scanner". 4. Select printer and then select the
  • Sharp DX-B351PL | DX-B351PL User Manual - Page 29
    setup In case printers support wired network printing, they can be connected to network to control printer to print in wired network mode. 4.1. Set IP Address The IP address of the printer may be automatically obtained through DHCP function or set manually. 4.1.1. Automatic Setting DHCP automatic
  • Sharp DX-B351PL | DX-B351PL User Manual - Page 30
    server to manage the printer. 1. View the basic information including product name, printer state and ink cartridge of printer. 2. Set up the network protocol parameters supported by printer. 3.Set up mail server client and acquire printer state via E-mail notification. 22
  • Sharp DX-B351PL | DX-B351PL User Manual - Page 31
    address of the printer is divided into DHCP auto assignment and manual setting, and the DHCP auto assignment function is on by default. You can set up the IPv4 address of printer manually to set up fixed IPv4 address for the printer. 1. Turn on printer
  • Sharp DX-B351PL | DX-B351PL User Manual - Page 32
    ". Refresh the browser and view the "IPv6 Local Link Address" and "Stateful Address" in "Wired IP Configuration" interface. Note:• The printer supports using the following IPv6 addresses for network printing and management. • IPv6 local-link address: local IPv6 address set up by oneself (addresses
  • Sharp DX-B351PL | DX-B351PL User Manual - Page 33
    5.2.2.2. Sleep time setup The default sleep time of printer is 1 minute and it can be changed via the embedded Web server (the printer installed via network connection). 1. Log into the embedded Web server (please refer to Chapter 5.1 for login method). 2. Click "Settings" - "Machine settings" - "
  • Sharp DX-B351PL | DX-B351PL User Manual - Page 34
    6. Print 6.1. Print Function You can set the print function through "Start" - "Devices and Printers" - select corresponding printer- right click - set print function in "Printing preferences". Some functions are as follows: Functions Diagram Note: • Windows 7 is taken as example in the above
  • Sharp DX-B351PL | DX-B351PL User Manual - Page 35
    feed tray. The default setting is auto selection, and if there is printing medium in the manual feed box, papers in manual feed tray will be used first. 6.4.1. Printing with the Automatic Feeder Tray Before printing, please make sure that the correct quantity of print media is
  • Sharp DX-B351PL | DX-B351PL User Manual - Page 36
    with the automatic feeder tray,see Chapter 2.1. 6.4.2. Printing with manual feed tray When you put papers in the manual feed tray, the printer will enter manual feed mode. Note: • Manual feed mode means that papers will be fed from the manual feed tray first if there are papers being put inside it
  • Sharp DX-B351PL | DX-B351PL User Manual - Page 37
    two-sided printing may damage the printer if some paper media are not suitable for automatic two-sided printing. • Auto duplex printing does not support poster printing. • Please refer to Chapter 2 for paper loading and type of mediums that can be printed via auto feed tray. 6.5.1. Duplex printing
  • Sharp DX-B351PL | DX-B351PL User Manual - Page 38
    3. Adjust paper size slide to A4 or Letter position to finish setting up. 4. Install the duplex unit in the printer. 6.5.2. How to carry out auto duplex printing 1.Open the print job to be printed from the application (such as a Notepad). 2.Select Print from the File menu. 30
  • Sharp DX-B351PL | DX-B351PL User Manual - Page 39
    3. Select printer of the corresponding model. 4. Single click "Preferences" for printing setup. 5. Select the "Duplex" in "Basic" tab and then select "Long Edge" or "Short Edge". 6. Single click "OK" to finish printing setup. Click "Print" to realize auto duplex printing. 31
  • Sharp DX-B351PL | DX-B351PL User Manual - Page 40
    6.6. Fine mode printing The Fine mode is applicable to engineering drawings and fine lines printing. Set up fine mode in the basic page of printer preferences After setup, fine printing mode can be realized. 32
  • Sharp DX-B351PL | DX-B351PL User Manual - Page 41
    6.7. Mute printing If the Mute Printing is set, the printing noise will be reduced but the printing will slow down to some extent. The operating steps of mute printing are as follows (applicable to printers that are installed via USB connection) Windows 7 is taken as the example in the following
  • Sharp DX-B351PL | DX-B351PL User Manual - Page 42
    provided with LCD control panel, users may set auto off function through control panel keys. Please refer to Chapter 7.1.6. • Individual countries (or regions) do not support auto-off setting. 34
  • Sharp DX-B351PL | DX-B351PL User Manual - Page 43
    6.9. Open Help Document You can open the "Printing preferences" and click "Help" button (for Windows Operation System only). The help document contains the user guide where you can find the information on print settings. 35
  • Sharp DX-B351PL | DX-B351PL User Manual - Page 44
    7.General Settings This Chapter mainly introduces some general settings. 7.1. System Setting 7.1.1. Language Setting "Language Setting" is used to select the language to be displayed on the control panel. 1) Press "Menu" to enter the Menu Settings interface. 2) Press "OK" to select the "1. System
  • Sharp DX-B351PL | DX-B351PL User Manual - Page 45
    7.1.2. Sleep Time Setting Sleep mode can reduce the energy consumption of the printer and "Sleep time setting" is used in the idle time before the device enters sleep mode. 1) Press "Menu" to enter the Menu Settings interface. 2) Press "OK" to select the "1. System Setting" option. 3) Press
  • Sharp DX-B351PL | DX-B351PL User Manual - Page 46
    7.1.4. Mute printing Set mute mode to establish low speed printing with low noise. When mute mode is "on", printing will be in a low speed. This mode is "off" by default. 1) Press "Menu" to enter the Menu Settings interface. 2) Press "OK" to select the "1. System Setting" option. 3) Press direction
  • Sharp DX-B351PL | DX-B351PL User Manual - Page 47
    7.1.5. Restore Factory Settings "Recover factor settings" is used to recover the default settings of the printer. The printer will restart itself automatically after recovering factory settings. 1) Press "Menu" to enter the Menu Settings interface. 2) Press "OK" to select the "1. System Setting"
  • Sharp DX-B351PL | DX-B351PL User Manual - Page 48
    Note: Set auto off condition: • Shutdown under no-port state (default configuration): no port is connected, printer is under standby or sleep mode. • Shutdown under idle state: the printer is under standby or sleep mode. • If auto off condition is satisfied, printer will be off at the preset time. •
  • Sharp DX-B351PL | DX-B351PL User Manual - Page 49
    7.3. Network Information You can check the network status through Network Information. 1) Press "Menu" to enter the Menu Settings interface. 2) Press direction key "▲" or "▼" and select "4. Network Info" option and press "OK" key to view "wired network information". 41
  • Sharp DX-B351PL | DX-B351PL User Manual - Page 50
    7.4. Print information report You can print information report by operating control panel. These pages can help you to learn about product information and diagnose and solve product failures. 1) Press "Menu" to enter the Menu Settings interface. 2) Press direction key "▲" or "▼" and select "5. Prt
  • Sharp DX-B351PL | DX-B351PL User Manual - Page 51
    8.Routine Maintenance 8.1. Cleaning the Printer Note: • Please use mild detergents. • Some parts of the printer may still be hot for a short period after use. When opening the front cover or rear cover to clean the parts inside the printer, please do not touch the parts in the shaded area as shown
  • Sharp DX-B351PL | DX-B351PL User Manual - Page 52
    Note: • When removing the toner cartridge, put the toner cartridge in a protective bag or wrap it with thick paper to avoid direct light damaging the toner cartridge. 3. Clean the inside of the printer by gently wiping the shaded area, as shown in picture, with a dry and lint-free cloth. 4. Wipe the
  • Sharp DX-B351PL | DX-B351PL User Manual - Page 53
    depending on the toner quantity needed by printing. • For printers with LED control panel, normally-on orange toner cartridge indicator means that the service life of toner cartridge has expired, and a new toner cartridge should be replaced. • For printers with LCD control panel, normally-on orange
  • Sharp DX-B351PL | DX-B351PL User Manual - Page 54
    Toner cartridge replacement steps: 1. Power off the printer. 2. Open the front cover and take the laser toner cartridge out along the track. 3. Press the blue button on the left side of drum component with left hand and lift the toner cartridge handle with right hand at the same time to take the
  • Sharp DX-B351PL | DX-B351PL User Manual - Page 55
    5. Pull the seal out and take the toner protection cover out. 6. Install the drum component along the inner track to finish installing toner cartridge. 7. Take the drum component with toner cartridge installed and install it inside the printer along the inner track of printer to finish installing.
  • Sharp DX-B351PL | DX-B351PL User Manual - Page 56
    3. Press the blue button on the left side of drum component with left hand and lift the toner cartridge handle with right hand at the same time to take the toner cartridge out. 4. Open the package of new drum component, take the protection device of drum component, and put the drum component on a
  • Sharp DX-B351PL | DX-B351PL User Manual - Page 57
    9. Troubleshooting Please read this section carefully. It may help you to solve common problems encountered during the printing process. If the problems persist, please contact Aftersales Service Centre. Prior to handling common problems, first check that: • The power cord is connected correctly,
  • Sharp DX-B351PL | DX-B351PL User Manual - Page 58
    out, please reinstall the paper tray inside the printer and close the front cover, then the printer will recover printing automatically. 9.1.2. Paper jam of manual feed tray 1. Gently pull the jammed paper out. 2. After taking papers jammed out, open and close the front cover and the printer will
  • Sharp DX-B351PL | DX-B351PL User Manual - Page 59
    9.1.3. Middle jam Note: • When papers jammed in the middle are taken out, please pay attention and do not touch the shaded area shown below, in order to avoid burn. 1. Pull paper tray out. 2. Gently pull the jammed paper out. 3. Install paper tray. 51
  • Sharp DX-B351PL | DX-B351PL User Manual - Page 60
    4. Open the front cover. 5. Take the laser toner cartridge out along the track. (For the purpose of preventing printing quality from affecting by the exposure of photosensitive drum, please put the laser toner cartridge inside the protection bag or warp it with thick paper). 6. Gently pull the
  • Sharp DX-B351PL | DX-B351PL User Manual - Page 61
    9.1.4. Paper Jam in the Fuser Unit do not touch the shaded area shown below in order to avoid burns. 1. Open the rear cover. 2. Open the fuser door using the handles on both sides. 3. Gently pull the jammed paper out. 53
  • Sharp DX-B351PL | DX-B351PL User Manual - Page 62
    4. After taking papers jammed out, close the back cover and open the front cover and then the printer will recover printing. 9.1.5. Duplex Unit Jam 1. Remove the duplex printing unit from the back of the printer. 2. Remove the jammed paper from the duplex unit. 3. If the paper does not come out
  • Sharp DX-B351PL | DX-B351PL User Manual - Page 63
    the schematic diagram is only for your reference. 9.2. Software Failure Problem The printer icon will not be displayed in the "Printers and cable of USB cable is connected correctly. Check whether the print spooler service is enabled. Check the power supply and the connection of the printer.
  • Sharp DX-B351PL | DX-B351PL User Manual - Page 64
    9.3. Common Troubleshooting 9.3.1. Common Problems Problem Cause Solution Problems with the Printer The printer does not work The cable between the computer and the printer is not connected properly. Error in specifying the print port. The printer is offline, and User Guide of Printer is
  • Sharp DX-B351PL | DX-B351PL User Manual - Page 65
    supported media range. There is foreign matter in the paper path. The feed roller is dirty. Internal parts failure. Take the excessive papers out from paper tray; please print with manual problem still cannot be solved, please contact the customer services center. 9.3.2. Image Defects Problem
  • Sharp DX-B351PL | DX-B351PL User Manual - Page 66
    the printer are damaged. • Please use printing medium within the specification scope and use manual feed tray for printing in case of special medium. • Please print with the corresponding or replace toner cartridge. • Please contact a customer service center to replace a new fuser assembly. 58
  • Sharp DX-B351PL | DX-B351PL User Manual - Page 67
    the usage specifications, within the specification scope, for example, the media is damp and use manual feed tray for or too rough or has been used previously. printing in case of a the toner cartridge. Please contact customer services center if the problem can still not be solved. 59
  • Sharp DX-B351PL | DX-B351PL User Manual - Page 68
    1O. Menu Structure With the help of the structure of this printer on the panel menu, you can view and set the following functions: 1) Press "Menu" to enter the menu setting interface. 2) Press "▲" or "▼" to select "Prt Info Rept". 3) Press "OK" and then "▲" or "▼" to select "Menu Struc Pg". 4) Press
  • Sharp DX-B351PL | DX-B351PL User Manual - Page 69
    11.Product Specifications Note: • Specification values vary slightly from printers with different models with different functions, and product specifications vary from different countries and regions. • These values are based on the initial data. For more information about the latest specifications
  • Sharp DX-B351PL | DX-B351PL User Manual - Page 70
    Operating system Microsoft Windows XP/ Windows Vista/ Windows 7/ Windows 8/ Windows 8.1/ Windows 10/ Windows Server 2003/ Windows Server 2008/ Windows Server 2012(32/64 Bit) Mac OS 10.7/10.8/10.9/10.10/10.11 Communication interface USB 2.0(High Speed) IEEE802.3 10Base-T/100Base-Tx Print Time of
  • Sharp DX-B351PL | DX-B351PL User Manual - Page 71
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71

SHARP DX-B351PL
Monochrome Laser Printer
It is recommended that you read this Guide carefully before using the printer.
User Guide