Sharp EA245WMi-BK User Manual
Sharp EA245WMi-BK Manual
 |
View all Sharp EA245WMi-BK manuals
Add to My Manuals
Save this manual to your list of manuals |
Sharp EA245WMi-BK manual content summary:
- Sharp EA245WMi-BK | User Manual - Page 1
Desktop Monitor MultiSync EA245WMi User's Manual Please find your model name in the label on the backside of monitor. - Sharp EA245WMi-BK | User Manual - Page 2
using DisplayPort English-11 Recovering from no image ...English-12 Controls ...English-13 Specifications ...English-20 Features ...English-21 Troubleshooting ...English-22 Using the Zoom Function ...English-24 Human sensing function...English-25 Using the Auto Brightness function English-26 - Sharp EA245WMi-BK | User Manual - Page 3
DO NOT REMOVE COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. This symbol warns user that uninsulated voltage . Therefore, it should be read carefully in order to avoid any problems. CAUTION: Please use the power cord provided with this display in - Sharp EA245WMi-BK | User Manual - Page 4
and used in accordance with the instructions, may cause harmful interference to radio to Identify and Resolve Radio-TV Interference Problems." This booklet is available from the U.S. fication: Class B Peripheral Model: MultiSync EA245WMi (EA245WMi, EA245WMi-BK) We hereby declare that the equipment - Sharp EA245WMi-BK | User Manual - Page 5
UP AND USING THE LCD COLOR MONITOR: • DO NOT OPEN THE MONITOR. There are no user serviceable parts inside and opening or removing damaged. • If the monitor does not operate normally by following operating instructions. • Allow adequate ventilation around the monitor so that heat can properly - Sharp EA245WMi-BK | User Manual - Page 6
its maximum setting. • Use the preset Size and Position controls with standard signals. • Use the preset Color Setting. • Use non-interlaced signals with a vertical refresh rate of 60 Hz. • Do not use primary color blue on a dark background, as it is difficult to see and may produce eye fatigue due - Sharp EA245WMi-BK | User Manual - Page 7
(Figure 2). NOTE: Reverse this procedure if you need to re-pack the monitor. To connect the LCD monitor to your system, follow these instructions: Figure 1 NOTE: Make sure to read "Recommended Use" (page 3) before installation. The accessories included will depend on the where the LCD monitor is - Sharp EA245WMi-BK | User Manual - Page 8
3. Place hands on each side of the monitor to tilt the LCD panel 30-degree angle and lift up to the highest position. 4. Connect all cables to the appropriate connectors (Figure C.1). When using the USB cable, connect the B type connector to the USB upstream port on the right back side of the - Sharp EA245WMi-BK | User Manual - Page 9
ADJUST (Analog input only) Refer to the Controls section of this User's Manual for a full description of these OSD controls. NOTE: If you have any problems, please refer to the Troubleshooting section of this User's Manual. Figure E.1 Power key Raise and Lower Monitor Screen The monitor may be - Sharp EA245WMi-BK | User Manual - Page 10
with a flexible arm. To prepare the monitor for alternate mounting purposes: • Follow the instructions provided by the manufacturer of the display mount. • To meet the safety requirements, the mounting stand must be able to support the weight of the monitor and be UL-certified. Remove Monitor Stand - Sharp EA245WMi-BK | User Manual - Page 11
English Mount Flexible arm This LCD monitor is designed for use with a flexible arm. 1. Follow the instructions on how Remove Monitor Stand for Mounting to remove the stand. 2. Using the specified 4 screws, attach the arm to the monitor (Figure F.1). Spring washer - Sharp EA245WMi-BK | User Manual - Page 12
following settings can be controlled by ControlSync: ECO TOOLS SCREEN COLOR BRIGHTNESS* Yes CONTRAST No ECO MODE Yes AUTO BRIGHTNESS Yes Yes HOT KEY Yes SIGNAL INFORMATION Yes SENSOR INFORMATION Yes KEY GUIDE Yes DATA COPY No CUSTOMIZE SETTING No CARBON SAVINGS No CARBON - Sharp EA245WMi-BK | User Manual - Page 13
DisplayPort OUT NOTE: DisplayPort cable DisplayPort IN/OUT DisplayPort IN/OUT DisplayPort cable DisplayPort cable When the monitor has no image, follow the troubleshooting step Recovering from no image and select DP VER "1.1" (see page 12). Then set from the first step. When this MST function - Sharp EA245WMi-BK | User Manual - Page 14
(multi-stream transport) and SST (single-stream transport) requires the corresponding display card. Check to make sure that the display card supports MST (multi-stream transport). Contact your supplier for detailed information. NOTE: Monitors should be connected by the included DisplayPort cable - Sharp EA245WMi-BK | User Manual - Page 15
1 or 2, a bar for CARBON FOOTPRINT will appear. CONTRAST Adjusts the overall image and background screen brightness by input signal level. NOTE: When L/B is selected in COLOR control, CONTRAST is disabled. English-13 - Sharp EA245WMi-BK | User Manual - Page 16
to page 26 for full "Auto Brightness" information. NOTE: This function is disabled when DV MODE is set to DYNAMIC. This function is disabled when Color Control System is set to DICOM SIM. BLACK LEVEL Adjusts the black level. OFF MODE SETTING The Intelligent Power Manager allows the monitor to enter - Sharp EA245WMi-BK | User Manual - Page 17
SETTING (HUMAN SENSING) Adjusts the threshold level of human sensing. When the human icon is located on the right side of the white color bar or vermilion color wave, a person is not detected. NOTE: Once the OSD has been closed, Human sensor starts to work. START TIME (HUMAN SENSING) Adjusts the - Sharp EA245WMi-BK | User Manual - Page 18
that may occur throughout the display area of the screen. These variations are characteristic of LCD panel technology. This function improves the color and evens out the luminance uniformity of the display. NOTE: Using the UNIFORMITY feature does reduce the overall peak luminance of the display - Sharp EA245WMi-BK | User Manual - Page 19
the desktop environment by a single standard RGB color space. With this color-supported environment, the operator could easily and confidently communicate color without further color management overhead in most common situations. NATIVE: Original color presented by the LCD panel that is unadjustable - Sharp EA245WMi-BK | User Manual - Page 20
input. SENSOR INFORMATION If you select "ON", monitor displays "HUMAN SENSOR ON" message. If you select "OFF", monitor doesn't display "HUMAN SENSOR ON" message. KEY GUIDE If you select "ON", the Key Guide appears on screen when the OSD menu is accessed. English-18 - Sharp EA245WMi-BK | User Manual - Page 21
English DATA COPY To initiate data copy from the master monitor to the sub monitor(s), select "DATA COPY" and touch "SELECT". A "PROCEEDING..." indicator will appear on the screen. NOTE: This function is only intended for the master monitor in ControlSync. All of the settings specified in the - Sharp EA245WMi-BK | User Manual - Page 22
Specifications Monitor Specifications MultiSync EA245WMi Notes LCD Module Diagonal: 61.13 Down: ±89° (CR > 10) Image Formation Time 6 ms (Gray to gray Typ.) Resolutions Supported 720 x 400*1: VGA text Some systems may not support all modes listed. 640 x 480*1 @ 60 Hz to 75 Hz 800 x 600*1 @ - Sharp EA245WMi-BK | User Manual - Page 23
resolutions, the fastest refresh rates and deepest color depths over standard cables. DisplayPort OUT: such as screen size and resolutions supported) directly to your computer, automatically Mounting Interface: Allows users to connect your MultiSync monitor to any VESA standard third party mounting - Sharp EA245WMi-BK | User Manual - Page 24
60Hz refresh rate. LED on monitor is not lit (no blue or amber color can be seen) • Power Switch should be in the ON position and power make sure that a supported mode has been selected on the display card or system being used. (Please consult display card or system manual to change graphics mode - Sharp EA245WMi-BK | User Manual - Page 25
is properly connected. Refer to your USB device User's Manual. • Check if the USB upstream port on the icon on SENSOR SETTING (HUMAN SENSING) is located on vermilion color, it is detected that there is person. • Make sure to make sure that the display card supports MST (multi-stream transport). • The - Sharp EA245WMi-BK | User Manual - Page 26
Using the Zoom Function Allows you to use the entire screen area, significantly expanding the size. Allows the picture displayed in the center to expand. SETUP 1. Select FULL or ASPECT in EXPANSION to activate the Zoom function (see page 16). EXPANSION OFF 2. Set a resolution via H.RESOLUTION or V. - Sharp EA245WMi-BK | User Manual - Page 27
English Human sensing function Human sensing function reduces power consumption by detecting the movement of a person. The HUMAN SENSING has following two settings: MODE LIGHT DEEP HUMAN SENSING SETTING 1 2 No person in front of the monitor BRIGHTNESS 0% Power saving mode Image of human - Sharp EA245WMi-BK | User Manual - Page 28
Using the Auto Brightness function The brightness of the LCD screen can be set to increase or decrease depending on the amount of ambient lighting within the room. If the room is bright, the monitor becomes correspondingly bright. If the room is dim, then the monitor will dim accordingly. The - Sharp EA245WMi-BK | User Manual - Page 29
English Manufacturer's Recycling and Energy Information NEC DISPLAY SOLUTIONS is strongly committed to environmental protection and sees recycling as one of the company's top priorities in trying to minimize the burden placed on the environment. We are engaged in developing environmentallyfriendly
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
-
26
-
27
-
28
-
29
 |
 |
Desktop Monitor
MultiSync EA245WMi
User’s Manual
Please find your model name in the label on the backside of monitor.