Sharp EA271F-BK User Manual - [.zip]

Sharp EA271F-BK Manual

Get Sharp EA271F-BK PDF manuals and user guides View all Sharp EA271F-BK manuals
Add to My Manuals
Save this manual to your list of manuals

Sharp EA271F-BK manual content summary:

  • Sharp EA271F-BK | User Manual - [.zip] - Page 1
    Desktop Monitor MultiSync EA271Q User's Manual MODEL: EA271Q, EA271Q-BK The regulations for this monitor applied to one of model names listed above. Please find your model name in the label on the rear side of the monitor.
  • Sharp EA271F-BK | User Manual - [.zip] - Page 2
    using DisplayPort English-13 Controls...English-14 Using the PICTURE MODE function English-24 Specifications...English-25 Features...English-27 Troubleshooting...English-28 Human sensing function...English-30 Multi Display setting...English-31 Using the Auto Brightness function English-33 Using
  • Sharp EA271F-BK | User Manual - [.zip] - Page 3
    . Therefore, it should be read carefully in order to avoid any problems. CAUTION: Please use the power cord provided with this display in accordance the AC power outlet being used. NOTE: This product can only be serviced in the country where it was purchased. Windows is a registered trademark
  • Sharp EA271F-BK | User Manual - [.zip] - Page 4
    Solutions of America, Inc. in this manual. Failure to comply with this government in accordance with the instructions, may cause harmful interference and Resolve Radio-TV Interference Problems." This booklet is available Classification: Class B Peripheral Model: MultiSync EA271Q (EA271Q, EA271Q-BK)
  • Sharp EA271F-BK | User Manual - [.zip] - Page 5
    wall outlet and move to a safe location, then refer servicing to qualified service personnel under the following conditions. If the monitor is used • If the monitor does not operate normally by following operating instructions. CAUTION • Allow adequate ventilation around the monitor so that heat
  • Sharp EA271F-BK | User Manual - [.zip] - Page 6
    CORRECT PLACEMENT AND ADJUSTMENT OF THE MONITOR CAN REDUCE EYE, SHOULDER, AND NECK FATIGUE. CHECK THE FOLLOWING WHEN YOU POSITION THE MONITOR: Ergonomics To realize the maximum ergonomics benefits, we recommend the following: • For optimum performance of the monitor, allow 20 minutes for warming up
  • Sharp EA271F-BK | User Manual - [.zip] - Page 7
    English Parts Name and Functions Control Panel Control buttons Refer to the Controls section. See page 14. Terminal Panel LED Power Key A AC IN Connector Connects with the supplied power cord. B DVI IN DVI signals input. C HDMI IN HDMI signals input. D DisplayPort IN DisplayPort signals input. E
  • Sharp EA271F-BK | User Manual - [.zip] - Page 8
    2). NOTE: Reverse this procedure if you need to re-pack the monitor. To connect the LCD monitor to your system, follow these instructions: Figure 1 NOTE: Make sure to read "Recommended Use" (page 3) before installation. CAUTION: Please tighten all screws. Screw Figure 2 NOTE: The accessories
  • Sharp EA271F-BK | User Manual - [.zip] - Page 9
    English 3. Place your hands on each side of the monitor to tilt the LCD panel to the maximum tilt angle and lift up to the highest position. 4. Connect all cables to the appropriate connectors (Figure C.1). When using the USB cable, connect the B type connector to the USB upstream port on the rear
  • Sharp EA271F-BK | User Manual - [.zip] - Page 10
    Figure E.1). NOTE: If you have any problems, please refer to the Troubleshooting section of this User's Manual. Figure E.1 Power key Adjustable stand with menu rotation to match the screen rotation. Refer to the OSD ROTATION instructions (see page 20). Rotation, Raise and Lower Tilt and Swivel
  • Sharp EA271F-BK | User Manual - [.zip] - Page 11
    . To prepare the monitor for alternate mounting purposes: • Follow the instructions provided by the manufacturer of the display mount. CAUTION: To meet the safety requirements, the monitor must be mounted to an arm that supports the weight of the monitor. See the Specifications page for details.
  • Sharp EA271F-BK | User Manual - [.zip] - Page 12
    Mount Flexible Arm This LCD monitor is designed for use with a flexible arm. 1. Follow the instructions in how to Remove Monitor Stand for Mounting. 2. Using 4 screws that meet the specifications listed below, attach the arm to the monitor (Figure F.1). Spring washer
  • Sharp EA271F-BK | User Manual - [.zip] - Page 13
    English ControlSync ControlSync simultaneously controls all sub monitors connected to a master monitor. It can also individually control a single sub monitor using the INDIVIDUAL ADJUST function (see page 22). Controlling all connected sub monitors (Synchronized control): • Connect a ControlSync
  • Sharp EA271F-BK | User Manual - [.zip] - Page 14
    /CI USB FUNCTIONALITY USB SELECTION FACTORY PRESET LANGUAGE OSD TURN OFF OSD LOCK OUT OSD ROTATION HOT KEY SIGNAL INFORMATION SENSOR INFORMATION KEY GUIDE DATA COPY CUSTOMIZE SETTING H.MONITOR V.MONITOR MONITOR NO. TILE COMP 180° ROTATE TILE MATRIX ENABLE TARGET MONITOR NO. INDIVIDUAL ADJUST CARBON
  • Sharp EA271F-BK | User Manual - [.zip] - Page 15
    SST (single-stream transport) requires a corresponding display adapter. Check to make sure that the display adapter supports MST (multi-stream transport). Please refer to the user instructions for the computer to change the settings. NOTE: Use the DisplayPort cables included with the monitors to
  • Sharp EA271F-BK | User Manual - [.zip] - Page 16
    *2 Depending on the OSD ROTATION setting, LEFT, RIGHT, UP and DOWN key guides are displayed at the , , , keys differently (See page 20). *3 MULTI screen will be displayed. *4 Swapping of picture by picture is not supported. The sound keeps the value of SOUND INPUT setting. The expansion keeps
  • Sharp EA271F-BK | User Manual - [.zip] - Page 17
    English ECO TOOLS BRIGHTNESS Adjusts the overall image and background screen brightness. If ECO MODE is set to 1 or 2, a bar for CARBON FOOTPRINT will appear. CONTRAST Adjusts the overall image and background screen brightness by input signal level. NOTE: CONTRAST and DV MODE can be adjusted for
  • Sharp EA271F-BK | User Manual - [.zip] - Page 18
    HUMAN SENSING The sensor detects the movement of a person by using the HUMAN SENSING function. The HUMAN SENSING function has three settings: OFF: Does not function. 1 (LIGHT): After it detects that there is no person after a period of time, the monitor shifts to low brightness mode automatically to
  • Sharp EA271F-BK | User Manual - [.zip] - Page 19
    English OVER SCAN (HDMI input only) Some video formats may require different scanning modes in order to best display the image. ON: Image size is larger than what can be displayed. The image edge will appear cropped. Approximately 95% of the image will be shown on the screen. OFF: Image size stays
  • Sharp EA271F-BK | User Manual - [.zip] - Page 20
    (see page 13). *: MST (multi-stream transport) and SST (single-stream transport) require the computer display adapter supports the feature. Please refer to the user instructions for the computer or display adapter. MULTI PICTURE Activates the MULTI PICTURE function and selects the priority
  • Sharp EA271F-BK | User Manual - [.zip] - Page 21
    English PICTURE PATTERN When "Left" or "Right" is selected in MUTI PICTURE, this selects the size of the picture. AUTO: Shows 2 screens based on the INPUT RESOLUTION and EXPANSION settings for the priority (adjustable) screen selected in MULTI PICTURE. CENTER: Splits 2 screens divided evenly from
  • Sharp EA271F-BK | User Manual - [.zip] - Page 22
    . OSD ROTATION This controls the OSD menu rotation. Depending on the image angle (monitor rotation), select a suitable OSD rotation setting. NOTE: Please set the KEY GUIDE to "ON" to display the key guide. Setting (Angle) Image Key guide 0 90 : LEFT : RIGHT : DOWN : UP 180 270 English-20
  • Sharp EA271F-BK | User Manual - [.zip] - Page 23
    "ON", the monitor displays a "HUMAN SENSOR ON" message. If you select "OFF", the monitor doesn't display the "HUMAN SENSOR ON" message. KEY GUIDE If you select "ON", the Key Guide appears on screen when the OSD menu is accessed. DATA COPY To initiate data copy from the master monitor to the sub
  • Sharp EA271F-BK | User Manual - [.zip] - Page 24
    Sets master monitor to 1 then sets the other monitors (sub monitors) by following below order. Example of installation and monitor number 789 456 456 123 123 H MONITOR 3 V MONITOR 3 H MONITOR 3 V MONITOR 2 TILE COMP Works in tandem with TILE MATRIX to compensate for the width of the tile
  • Sharp EA271F-BK | User Manual - [.zip] - Page 25
    English ECO Information CARBON SAVINGS: Displays the estimated carbon savings information in kg. CARBON USAGE: Displays the estimated carbon usage information in kg. This is the arithmetic estimation, not actual measurement value. COST SAVINGS: Displays the electricity cost savings in balance.
  • Sharp EA271F-BK | User Manual - [.zip] - Page 26
    Using the PICTURE MODE function Choose the Picture Mode that is most suitable for the type of content that is shown. There are several Picture Mode types (FULL, sRGB, Low Blue Light, DICOM SIM., PROGRAMMABLE). • Each PICTURE MODE includes WHITE, HUE, OFFSET and SATURATION settings. The type of
  • Sharp EA271F-BK | User Manual - [.zip] - Page 27
    English Specifications Monitor Specifications MultiSync EA271Q Notes LCD Module Diagonal: 68.47 cm/27 inches Viewable Image Size: 68.47 cm/27 inches Native Resolution (Pixel Count): 2560 x 1440 Active
  • Sharp EA271F-BK | User Manual - [.zip] - Page 28
    Major supported timings Resolution H V 720 x 400 640 x 480 720 x 480 720 x 576 800 x 600 1024 x 768 1280 x 720 1280 x 960 1280 x 1024 1440 x 900 1600 x 1200 1680 x
  • Sharp EA271F-BK | User Manual - [.zip] - Page 29
    and easy image adjustment and lower emissions. VESA Standard Mounting Interface: Allows you to connect your MultiSync monitor to any VESA standard third party mounting arm or bracket. OSD Rotation: Supports better intuitive OSD operation when the monitor is set in pivot (90/270 degrees) or inverted
  • Sharp EA271F-BK | User Manual - [.zip] - Page 30
    Timings has been selected for the display card in the system being used. (Please consult the manual for the system or display card for supported resolution and changing the settings.) • When using an HDMI input, please change "OVER SCAN". • Please check "TILE MATRIX" and "180° ROTATE" settings
  • Sharp EA271F-BK | User Manual - [.zip] - Page 31
    properly connected. Refer to your USB device User's Manual. • Check that the USB upstream port on the complies with USB Power Delivery. • If you still have trouble, unplug the monitor's power cord from the AC outlet and to make sure that the display card supports MST (multi-stream transport). • The
  • Sharp EA271F-BK | User Manual - [.zip] - Page 32
    Human sensing function The Human sensing function reduces power consumption by detecting the movement of a person. The HUMAN SENSING has following two settings: MODE LIGHT DEEP HUMAN SENSING SETTING 1 2 No person in front of the monitor BRIGHTNESS 0% Power saving mode Image of human sensing
  • Sharp EA271F-BK | User Manual - [.zip] - Page 33
    English Multi Display setting [Example of V MONITOR 3, H MONITOR 3 (See page 22)] 1. Touch the MENU/EXIT key to display the OSD menu. 2. Touch the LEFT/RIGHT key to select MULTI DISPLAY. 3. Touch the DOWN/UP key to select H MONITOR. Move the LEFT/RIGHT key left or right to set H MONITOR 3. 4. Touch
  • Sharp EA271F-BK | User Manual - [.zip] - Page 34
    Using ControlSync function with multi screen configuration To control a sub monitor from the master monitor, the control keys on the master monitor is used. Please install the master monitor at an accessible place. Mounting multi screen configuration When monitors are used in a multi-screen
  • Sharp EA271F-BK | User Manual - [.zip] - Page 35
    English Using the Auto Brightness function The brightness of the LCD screen can be set to increase or decrease depending on the amount of ambient lighting within the room. If the room is bright, the monitor becomes correspondingly bright. If the room is dim, then the monitor will dim accordingly.
  • Sharp EA271F-BK | User Manual - [.zip] - Page 36
    Using the MULTI PICTURE function This monitor can display split screens from two sources by using any one of the input combinations shown on page 18. NOTE: Please see MULTI PICTURE (page 18) and PICTURE PATTERN (page 19). BRIGHTNESS and SOUND INPUT settings are set to be the same for both screens.
  • Sharp EA271F-BK | User Manual - [.zip] - Page 37
    English Using the Zoom function Allows you to use the entire screen area, significantly expanding the size. Allows the picture displayed in the center to expand. NOTE: When LEFT or RIGHT is set at MULTI PICTURE, the other picture is expanded or reduced automatically. SETUP 1. Select FULL or ASPECT
  • Sharp EA271F-BK | User Manual - [.zip] - Page 38
    B. The left image is set to be the main one. In this case, the priority image is set to be on the left side. The size of the image on the right side with black area is reduced. To enlarge the split images: use the following procedures to reduce the black area and enlarge the split images. 1. In case
  • Sharp EA271F-BK | User Manual - [.zip] - Page 39
    English Manufacturer's Recycling and Energy Information NEC DISPLAY SOLUTIONS is strongly committed to environmental protection and sees recycling as one of the company's top priorities in trying to minimize the burden placed on the environment. We are engaged in developing environmentallyfriendly
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
Please find your model name in the label on the rear side of the monitor.
MODEL: EA271Q, EA271Q-BK
The regulations for this monitor applied to one of model names listed above.
Desktop Monitor
MultiSync EA271Q
User’s Manual