Sharp EA271Q/EA271U MultiSync USB-C Compatibility

Compatibility Information for USB Type-C

This is compatibility information applies to both the MultiSync® EA271Q and EA271U and USB Type-C devices. This information from our internal or third party test results. These results are not

guaranteed in all user environments. In some cases, you may need to change an OSD setting. If any function is not working well, please unplug the monitor’s power cord from the AC outlet and

then remove the USB-C cable. Reconnect the power cord and then the USB-C cable.

Test items

Video :

Video signal (DisplayPort Alt Mode on USB Type-C) is displayed with correct resolution and colors

Audio:

Audio signal works correctly without problems

USB HUB :

USB devices connected on the USB downstream port of the monitor work correctly

(Legend)

Result

A :

Works normally

B :

Works normally with an OSD setting change

C :

Not supported

- :

The USB Type-C device does not have this functionality

(Reference)

1

Cable Information for USB Type-C

NEC has confirmed basic functionality of these cables. Other factors in the specific environment may impact

other functions, performance and reliability of the connection. This list is not exhaustive. If you are using a

cable other than these listed, NEC recommends a cable certified for USB PD (20V/3A) and USB3.1

2

Conversion cable information

If the video source is DisplayPort, please use a DisplayPort

to DisplayPort Cable.

3

Other information

NEC does not recommend using the display to charge

mobile battery packs.

Brand

Type

Length

Belkin

F2CU030BT1M-BLK

0.9m

Belkin

F2CU052bt1M-BLK

0.9m

ELECOM

MPA-CC13A10NBK

1.0m

IOGEAR

G2LU3CCM01E

1.0m

GRIFFIN

GC41634

0.9m