Sharp EA271U User Manual

Sharp EA271U Manual

Get Sharp EA271U PDF manuals and user guides View all Sharp EA271U manuals
Add to My Manuals
Save this manual to your list of manuals

Sharp EA271U manual content summary:

  • Sharp EA271U | User Manual - Page 1
    Desktop Monitor MultiSync EA271U User's Manual MODEL: EA271U, EA271U-BK The regulations for this monitor applied to one of model names listed above. Please find your model name in the label on the rear side of the monitor.
  • Sharp EA271U | User Manual - Page 2
    -6 ControlSync...English-11 Controls...English-13 Using the Picture Mode function English-22 Specifications...English-23 Features...English-25 Troubleshooting...English-26 Human sensing function...English-29 Using the Auto Brightness function English-30 Using the MULTI PICTURE function English
  • Sharp EA271U | User Manual - Page 3
    . Therefore, it should be read carefully in order to avoid any problems. CAUTION: Please use the power cord provided with this display in accordance the AC power outlet being used. NOTE: This product can only be serviced in the country where it was purchased. Windows is a registered trademark
  • Sharp EA271U | User Manual - Page 4
    Solutions of America, Inc. in this manual. Failure to comply with this government used in accordance with the instructions, may cause harmful interference and Resolve Radio-TV Interference Problems." This booklet is available Peripheral Model: MultiSync EA271U (EA271U, EA271U-BK) We hereby declare
  • Sharp EA271U | User Manual - Page 5
    SETTING UP AND USING THE LCD COLOR MONITOR: • DO NOT OPEN THE MONITOR. There are no user serviceable parts inside and opening or removing damaged. • If the monitor does not operate normally by following operating instructions. CAUTION • Allow adequate ventilation around the monitor so that heat can
  • Sharp EA271U | User Manual - Page 6
    control to its maximum setting. • Use the preset Size and Position controls with standard signals. • Use the preset Color Setting. • Use non-interlaced signals. • Do not use primary color blue on a dark background, as it is difficult to see and may produce eye fatigue due to insufficient contrast
  • Sharp EA271U | User Manual - Page 7
    LED Power Key A AC IN Connector Connects with the supplied power cord. B HDMI 2 IN HDMI signal input. Supports 4K@30 Hz in HDMI 2. C HDMI 1 IN HDMI signal input. Supports 4K@60 Hz in HDMI 1. D DisplayPort IN DisplayPort signals input. E ControlSync IN/OUT Connects with the supplied ControlSync
  • Sharp EA271U | User Manual - Page 8
    2). NOTE: Reverse this procedure if you need to re-pack the monitor. To connect the LCD monitor to your system, follow these instructions: Figure 1 NOTE: Make sure to read "Recommended Use" (page 3) before installation. CAUTION: Please tighten all screws. Screw Figure 2 NOTE: The accessories
  • Sharp EA271U | User Manual - Page 9
    English 3. Place your hands on each side of the monitor to tilt the LCD panel to the maximum tilt angle and lift up to the highest position. 4. Connect all cables to the appropriate connectors (Figure C.1). When using the USB cable, connect the B type connector to the USB upstream port on the rear
  • Sharp EA271U | User Manual - Page 10
    Figure E.1). NOTE: If you have any problems, please refer to the Troubleshooting section of this User's Manual. Figure E.1 Power key Adjustable stand with menu rotation to match the screen rotation. Refer to the OSD ROTATION instructions (see page 19). Rotation, Raise and Lower Tilt and Swivel
  • Sharp EA271U | User Manual - Page 11
    . To prepare the monitor for alternate mounting purposes: • Follow the instructions provided by the manufacturer of the display mount. CAUTION: To meet the safety requirements, the monitor must be mounted to an arm that supports the weight of the monitor. See the Specifications page for details.
  • Sharp EA271U | User Manual - Page 12
    Mount Flexible Arm This LCD monitor is designed for use with a flexible arm. 1. Follow the instructions in how to Remove Monitor Stand for Mounting. 2. Using 4 screws that meet the specifications listed below, attach the arm to the monitor (Figure F.1). Spring washer
  • Sharp EA271U | User Manual - Page 13
    English ControlSync ControlSync simultaneously controls all sub-monitors connected to a master monitor. It can also individually control a single submonitor using the INDIVIDUAL ADJUST function (see page 21). Controlling all connected sub-monitors (Synchronized control): • Connect a ControlSync
  • Sharp EA271U | User Manual - Page 14
    settings can be controlled by ControlSync: ECO TOOLS SCREEN COLOR TOOLS MENU TOOLS MULTI DISPLAY ECO INFORMATION BRIGHTNESS* OFF OSD LOCK OUT OSD ROTATION HOT KEY SIGNAL INFORMATION SENSOR INFORMATION KEY GUIDE DATA COPY CUSTOMIZE SETTING MONITOR NO. 180° ROTATE TARGET MONITOR NO. INDIVIDUAL
  • Sharp EA271U | User Manual - Page 15
    *2 Depending on the OSD ROTATION setting, LEFT, RIGHT, UP and DOWN key guides are displayed at the , , , keys differently (See page 19). *3 MULTI screen will be displayed. *4 Swapping of Picture-By-Picture is not supported. The sound keeps the value of SOUND INPUT setting. The expansion keeps
  • Sharp EA271U | User Manual - Page 16
    CONTRAST Adjusts the overall image and background screen brightness by input signal level. NOTE: CONTRAST and DV MODE can be adjusted for all COLOR CONTROLS except L/B. ECO MODE Decreases the amount of power consumption by reducing the brightness level. OFF: Does not function. 1: Sets the brightness
  • Sharp EA271U | User Manual - Page 17
    SETTING (HUMAN SENSING) Adjusts the threshold level of human sensing. When the human icon is located on the right side of the white color bar or vermilion color wave, a person is not detected. NOTE: The human sensing function starts after the OSD menu is closed. START TIME (HUMAN SENSING) Adjusts
  • Sharp EA271U | User Manual - Page 18
    . SHARPNESS Adjusts the crispness of the image. UHD UPSCALING If "ON" is selected, low resolution image will be improved by complementing the missing pixels. Color Picture Mode (1, 2, 3, 4, 5) Select the picture mode that is most suitable for the type of content that is shown. You can change up to
  • Sharp EA271U | User Manual - Page 19
    English Tools VOLUME Controls the volume of the speakers or headphones. To mute the speaker output touch the " /RESET" key. SOUND INPUT Selects audio source. When MULTI PICTURE is OFF: Outputs the audio signal of current picture. When MULTI PICTURE is LEFT or RIGHT: LEFT: Outputs the audio
  • Sharp EA271U | User Manual - Page 20
    resolution is 3840 x 2160 (60 Hz). The maximum transfer speed is equivalent to USB 2.0. USB3.1: The maximum supported resolution is 3840 x 2160 (30 Hz). The maximum transfer speed is equivalent to USB 3.1. NOTE: To avoid data loss, before changing the setting, ensure that
  • Sharp EA271U | User Manual - Page 21
    . OSD ROTATION This controls the OSD menu rotation. Depending on the image angle (monitor rotation), select a suitable OSD rotation setting. NOTE: Please set the KEY GUIDE to "ON" to display the key guide. Setting (Angle) Image Key guide 0 90 : LEFT : RIGHT : DOWN : UP 180 270 English-19
  • Sharp EA271U | User Manual - Page 22
    "ON", the monitor displays a "HUMAN SENSOR ON" message. If you select "OFF", the monitor doesn't display the "HUMAN SENSOR ON" message. KEY GUIDE If you select "ON", the Key Guide appears on screen when the OSD menu is opened. DATA COPY To initiate data copy from the master monitor to the sub
  • Sharp EA271U | User Manual - Page 23
    English TARGET MONITOR NO. Controls a sub-monitor's OSD by using the master monitor's control keys. Sets the sub-monitor number that is set at MONITOR NO. By touching the INPUT (SELECT) key, each sub-monitor displays its monitor number. INDIVIDUAL ADJUST ON: Controls an individual sub-monitor from
  • Sharp EA271U | User Manual - Page 24
    that is shown. There are several Picture Mode types (FULL, sRGB, Low Blue Light, DICOM SIM., PROGRAMMABLE). • Each Picture Mode includes WHITE (Color Temperature), WHITE (White Balance), HUE, OFFSET and SATURATION settings. The type of PRESET PRESET FULL sRGB Low Blue Light DICOM SIM. PROGRAMMABLE
  • Sharp EA271U | User Manual - Page 25
    English Specifications Monitor Specifications MultiSync EA271U Notes LCD Module Diagonal: 68.47 cm/27 HDMI: HDMI Connector: Digital YUV Digital RGB HDMI2 (HDCP1.4), HDMI1 (HDCP2.2) Display Colors 1,064,332,261 (DisplayPort/HDMI 10 bit) Depends on display card used. Synchronization
  • Sharp EA271U | User Manual - Page 26
    Major supported timings Resolution H V 640 x 480 720 x 400 720 x 480 720 x 576 800 x 600 832 x 624 1024 x 768 1280 x 720 1280 x 960 1280 x 1024 1440 x 900 1600 x
  • Sharp EA271U | User Manual - Page 27
    uniformity level that may occur on the screen and improves the color and evens out the luminance uniformity of the display. Human/ can correct the screen rotation image without using an OS function, which supports, for example, easier Tile Matrix setting. Customize Setting (CUSTOMIZE SETTING):
  • Sharp EA271U | User Manual - Page 28
    the system being used. (Please consult the manual for the system or display card for supported resolution and changing the settings). • Check 3840 x 2160, please use the HDMI cable that supports 4K resolution. LED on monitor is not lit (no blue or amber color can be seen) • Power Switch should be
  • Sharp EA271U | User Manual - Page 29
    card in the system being used. (Please consult the manual for the system or display card for supported resolution and changing the settings). • When using an sure the USB cord is properly connected. Refer to your USB device User's Manual. • Check that USB FUNCTIONALITY is set to ON or AUTO, and the
  • Sharp EA271U | User Manual - Page 30
    the connected USB-C device complies with USB Power Delivery. • Check if the USB Type-C cable complies with USB Power Delivery. • If you still have trouble, unplug the monitor's power cord from the AC outlet and then remove the USB-C cable. Reconnect the power cord and then the USB-C cable. Transfer
  • Sharp EA271U | User Manual - Page 31
    English Human sensing function The Human sensing function reduces power consumption by detecting the movement of a person. The HUMAN SENSING has following two settings: MODE LIGHT DEEP HUMAN SENSING SETTING 1 2 No person in front of the monitor BRIGHTNESS 0% Power saving mode Image of human
  • Sharp EA271U | User Manual - Page 32
    Using the Auto Brightness function The brightness of the LCD screen can be set to increase or decrease depending on the amount of ambient lighting within the room. If the room is bright, the monitor becomes correspondingly bright. If the room is dim, then the monitor will dim accordingly. The
  • Sharp EA271U | User Manual - Page 33
    English Using the MULTI PICTURE function This monitor can display split screens from two sources by using any one of the input combinations shown on page 17. NOTE: Please see MULTI PICTURE (page 17) and PICTURE PATTERN (page 18). BRIGHTNESS and SOUND INPUT settings are set to be the same for both
  • Sharp EA271U | User Manual - Page 34
    Using the Zoom function Allows you to use the entire screen area, significantly expanding the size. Allows the picture displayed in the center to expand. NOTE: When LEFT or RIGHT is set at MULTI PICTURE, the other picture is expanded or reduced automatically. SETUP 1. Select FULL or ASPECT in
  • Sharp EA271U | User Manual - Page 35
    English B. The left image is set to be the main one. In this case, the priority image is set to be on the left side. The size of the image on the right side with black area is reduced. To enlarge the split images: use the following procedures to reduce the black area and enlarge the split images.
  • Sharp EA271U | User Manual - Page 36
    can occasionally become unreliable. The typical symptom is that no image is displayed or the image is corrupted. The described OSD menu option offers additional firmware processing for DisplayPort signals to optimize the native resolution support and therefore improve signal reliability. English-34
  • Sharp EA271U | User Manual - Page 37
    Maximum Operation 150 W Normal Operation 38 W Default setting, USB/Audio sleeping Energy Saving Mode 0.33 W* Off Mode 0.29 W *: Factory settings. LED color Blue Blue Amber Unlit For additional information visit: http://www.necdisplay.com/ (in USA) http://www.nec-display-solutions.com/ (in
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
Please find your model name in the label on the rear side of the monitor.
Desktop Monitor
MultiSync EA271U
User’s Manual
MODEL: EA271U, EA271U-BK
The regulations for this monitor applied to one of model names listed above.