Sharp HTSB200 HT-SB200 Operation Manual - Page 10
Preparation for Use - speaker
UPC - 074000369399
View all Sharp HTSB200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 10 highlights
HT-SB200 Speaker preparation Make sure to unplug the AC power cord before installing the speaker or changing the position. Select from three installation methods according to the preferred position. Using spikes You may choose from the two different spike lengths provided: 25 mm and 30 mm. Nuts (secured on 30 mm spikes) must be used when installing either the 25 mm or 30 mm spikes. The speaker can be leveled by adjusting the spikes and nuts. Using foot cushions Option 2 Option 1 Preparation for Use Option 2 Option 1 Attach foot cushions as shown Note: Option 1 or option 2 foot cushion positions based on LCD TV stand. Tighten all spikes as shown Notes: ● Option 1 or option 2 indicates spike positions based on LCD TV stand. ● When attaching the spikes, place the speaker on a cushion or soft cloth to avoid damage. Caution: When using these spikes on glossy or slippery table such as on glass top, stick foot cushions at the bottom of the spikes to avoid 10 slippage.