Sharp HTSB200 HT-SB200 Operation Manual - Page 19

Maintenance ■ Cleaning the cabinet Periodically wipe the cabinet with a soft cloth. Caution: ● Do not use chemicals for cleaning (gasoline, paint thinner, etc.). It may damage the cabinet finish. ● Do not apply oil to the inside of each component. It may cause malfunctions. Error indicators and warnings When you fail to perform operations properly, the following messages are displayed on the speaker. Display Meaning ● Malfunction of the surround circuit. Place the speaker away or from noise source and plug the AC power cord into another AC outlet. (*) or ● When the protection circuit of the amplifier is activated. Power indicator (blinks red) (*): Should the same message appear even if the speaker is unplugged and plugged in or is set to the stand-by mode and on again, contact your local dealer where you purchased the speaker. Specifications HT-SB200 As part of our policy of continuous improvement, SHARP reserves the right to make design and specification changes for product improvement without prior notice. The performance specification figures indicated are nominal values of production speaker. There may be some deviations from these values in individual speaker. References ■ General Power source DC IN 12V 4A: AC/DC adaptor (AC 100 - 240 V ~ 50/60 Hz) Power consumption 10 W Maximum output 32 W power Speaker 2.1-way Speaker System Front Speakers: 1-1/2" (38 mm) Full Range Subwoofer: 2-1/4" (57 mm) Woofer (x4) Audio output terminals Speakers: 12 ohms/channel Subwoofer: 3 ohms (12 ohms x 4 parallel connection) Input terminals Analog input (LINE 1): RCA type x 1pair (L/R) 500 mV / 47 kohms Analog input (LINE 2): Stereo mini jack Ø 3.5 mm 100 mV / 47 kohms Dimensions Width: 31-1/2" (800 mm) Height: 3-3/4" (96 mm) Depth: 2-3/4" (70 mm) Weight 3.86 lbs. (1.75 kg) 19