Sharp LC-15S4US LC-15S4U-S Operation Manual - Page 30

Useful Features (Continued) NO SIGNAL OFF The NO SIGNAL OFF function allows you to save energy. When set to "ENABLE", the power will automatically shut down if no signal inputs for 5 minutes. PICTURE FLIP You can set the orientation of the picture. Setting the PICTURE FLIP on the MENU screen 1 Press MENU to display the Menu screen. 2 Press \/| to select "OPTION". 3 Press '/" to select "NO SIGNAL OFF", and press ENTER. 4 Press '/" to select "ENABLE", and press ENTER. ENABLE DISABLE 5 Press MENU to exit. A • "DISABLE" is factory preset value. • This function can work only in TV mode. • If interfered with by other broadcast or radio waves, "NO SIGNAL OFF" may not work properly even when the broadcast is over. NO OPERATION OFF When set to "ENABLE", the power will automatically shut down if there is no operation for 3 hours. 1 Repeat steps 1 and 2 of NO SIGNAL OFF. 2 Press '/" to select "NO OPERATION OFF", and press ENTER. 3 Press '/" to select "ENABLE", and press ENTER. ENABLE DISABLE • 5 minutes before the power shuts down, remaining time is displayed every minute. 4 Press MENU to exit. A • "DISABLE" is factory preset value. 1 Repeat steps 1 and 2 of NO SIGNAL OFF. 2 Press '/" to select "PICTURE FLIP", and press ENTER. 3 Press '/" to select the desired mode, and press ENTER. NORMAL MIRROR ROTATE UPSIDE DOWN 4 Press MENU to exit. Directly setting the PICTURE FLIP 1 Press PIC.FLIP to display the PICTURE FLIP screen. 2 Press PIC.FLIP to change the setting. PICTURE FLIP [NORMAL] PICTURE FLIP [MIRROR] PICTURE FLIP [UPSIDE DOWN] PICTURE FLIP [ROTATE] [NORMAL] Normal image orientation. [MIRROR] To display mirror images for special uses. [UPSIDE DOWN] To display upside down images for special uses. [ROTATE] To display rotated images for special uses. 30