Sharp LC-40LE830U LC-40LE830U LC-46LE830U LC-52LE830U LC-60LE830U Opera - Page 74

Appendix Setting the TV on the Wall CAUTION LC-40LE830U • This TV should be mounted on the wall with both the AN-37AG2 (SHARP) wall mount bracket and the AN-37P30 (SHARP) attachment of the wall mount bracket. The TV cannot be mounted when with only the AN-37AG2 wall mount bracket. The use of other wall mount brackets may result in an unstable installation and may cause serious injuries. LC-46LE830U/LC-52LE830U/LC-60LE830U • This TV should be mounted on the wall only with the wall mount bracket AN-52AG4 (SHARP). The use of other wall mount brackets may result in an unstable installation and may cause serious injuries. • Installing the TV requires special skill that should only be performed by qualified service personnel. Customers should not attempt to do the work themselves. SHARP bears no responsibility for improper mounting or mounting that results in accident or injury. Using an optional bracket to mount the TV • You can ask a qualified service professional about using an optional AN-37AG2+AN-37P30 or AN-52AG4 bracket to mount the TV on the wall. • Carefully read the instructions that come with the bracket before beginning work. Hanging on the wall AN-37AG2+AN-37P30 or AN-52AG4 wall mount bracket. (See the bracket instructions for details.) Vertical mounting Angular mounting About setting the TV angle LC-40/46/52LE830U AN-37AG2 + AN-37P30 0/5/10/15/20° LC-40LE830U LC-60LE830U • The center of the display: 0/5/10° 1/32 inch (0.5 mm) above the "A" position. AN-52AG4 LC-46LE830U • The center of the display: 3/32 inch (2.0 mm) under the "b" position. LC-52LE830U • The center of the display: 9/32 inch (7.0 mm) under the "b" position. LC-60LE830U • The "e" position is at the center of the display. • Refer to the operation manual of AN-37AG2+AN-37P30 or AN-52AG4 for details. • Detach the cable tie on the rear of the TV when using the optional mount bracket. • Due to the terminal configuration on this TV, when you wall-mount this model, make sure there is enough space between the wall and the TV for the cables. • To use this TV mounted on a wall, remove the AC cord holder and the covers at the 4 locations on the rear of the TV, and then use the screws supplied with the wall mount bracket to secure the bracket to the rear of 1 the TV. 2 1 Optional Accessories The listed optional accessories are available for the Liquid Crystal Television. Please purchase them at your nearest shop. • Additional optional accessories may be available in the near future. When purchasing, please read the newest catalogue for compatibility and check the availability. Part name Wall mount bracket Attachment Wall mount bracket Model number AN-37AG2 (for LC-40LE830U) AN-37P30 (for LC-40LE830U) AN-52AG4 (for LC-46LE830U/ LC-52LE830U/LC-60LE830U) 72