Sharp LC-46D64U LC-42D64U LC-46D64U LC-52D64U Operation Manual - Page 26
Antenna Setup - DIGITAL, Signal Strength, ENTER, When viewing ANALOG broadcasts
UPC - 074000370463
View all Sharp LC-46D64U manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 26 highlights
Basic adjustment settings Channel memory setting 1 Press MENU to display the MENU screen, and then press c/d to select "Setup". 2 Press a/b to select "CH Setup", and then press ENTER. • If you already set the Secret No., input the 4-digit secret number here. See page 41 for setting a secret number. 3 Press a/b to select "CH Memory", and then press ENTER. 4 Press a/b to select ANALOG (Air), ANALOG (Cable), DIGITAL (Air) or DIGITAL (Cable), and then press ENTER. 5 When viewing ANALOG broadcasts: 1 Press c/d to select the channel to skip, and then press b to move down. 2 Press c/d to select "On", and then press ENTER. When viewing DIGITAL broadcasts: 1 Press a/b to select the channel to skip, and then press c/d to select "On". • On: Skips channels. (Channel selection disabled using CH r/s.) • Off: Does not skip channels. (Channel selection enabled using CH r/s.) 6 Press MENU to exit. NOTE • Make sure what kind of connection is made with your TV. Antenna Setup - DIGITAL In order to receive digital air broadcasts, you need a digital broadcast antenna. You can confirm the antenna configuration through the "Antenna Setup DIGITAL" screen. If necessary, adjust the direction of the antenna to obtain the maximum signal strength. Signal Strength 1 Press MENU to display the MENU screen, and then press c/d to select "Setup". 2 Press a/b to select "Antenna Setup DIGITAL", and then press ENTER. 3 Press a/b to select "Signal Strength". • The signal strength of DIGITAL channel is displayed. The signal information is based on the current channel. Signal Strength Channel Strength Signal Strength Current 0 Max 0 4 Press MENU to exit. Channel Strength The channel signal strength can also be checked separately. 1 Repeat steps 1 and 2 in Signal Strength in Antenna Setup - DIGITAL. 2 Press a/b to select "Channel Strength", and then press ENTER. 3 Input the 2-digit channel number to check the signal strength of the selected channel. • Make sure the signal is strong enough for each channel. Signal Strength Channel Strength 1 2 CH Signal Strength Current 0 Max 0 4 Press MENU to exit. NOTE • This function is available for DIGITAL (Air) only. 24