Sharp LC32E67U LC-32E67U Operation Manual - Page 25

On-Screen Display Menu Power Control Menu Power control setting allows you to save energy. Example Power Control Power Saving No Signal Off No Operation Off 1 Press MENU to display the MENU screen, and then press c/d to select "Power Control". 2 Press a/b to select a specific adjustment item, and then press ENTER. 3 Press a/b (or c/d) to select the desired setting, and then press ENTER. 4 Press MENU to exit. Power Saving This function allows you to automatically reduce the backlight brightness in order to decrease the power consumption and increase the backlight lifespan. Standard: Reduces the backlight brightness to 80%. When set to "Standard", " " appears on the screen. Advanced: Reduces the backlight brightness to 70%. When set to "Advanced", " " appears on the screen. Off: The backlight brightness is the same value of your settings in the selected AV MODE. • "Power Saving" does not function when you set "AV MODE" to "DYNAMIC (Fixed)". • When "OPC" is set to "On(Display)" or "On" while "Power Saving" is set to "Standard" or "Advanced", the Power Saving leaf icon appears to the left of "OPC" in the Picture menu screen. • When "OPC" is set to "Off" while "Power Saving" is set to "Standard" or "Advanced", the Power Saving leaf icon appears to the left of "Backlight" in the Picture menu screen. • You can select Power Saving by pressing POWER SAVING on the remote control unit. (See page 17.) No Signal Off When set to "Enable", the power will automatically shut down if there is no signal for 15 minutes. • When it is 5 minutes before the power shuts down, the remaining time will start to keep appearing every minute. • "Disable" is the factory preset value. • When a TV program finishes, this function may not operate. No Operation Off You can set the time length the TV takes to automatically shut the power down when there is no operation. 30min/3Hour/Disable • When it is 5 minutes before the power shuts down, the remaining time will start to keep appearing every minute. • "Disable" is the factory preset value. Setup Menu Example Setup EZ Setup CH Setup Input Skip Input Label Parental CTRL Position PC Setup PC Audio Select HDMI Auto View Audio Setup Language Reset 1 Press MENU to display the MENU screen, and then press c/d to select "Setup". 2 Press a/b to select a specific adjustment item, and then press ENTER. • When you select "EZ Setup", "CH Setup", "Parental CTRL" or "Reset", you can enter the 4-digit secret number here. See page 26 for setting a secret number. 3 Press a/b (or c/d) to select the desired setting, and then press ENTER. 4 Press MENU to exit. EZ Setup You can run EZ Setup again, even after setting up the preset channels. Language: Select from among 3 languages (English, French and Spanish). TV Location: Select "Home" or "Store" for the location where you plan to install the TV. This product qualifies for ENERGY STAR V3.0 in Home mode default setting. Home: "Power Saving" is set to "Off", and AV MODE is set to "STANDARD". Store: "Power Saving" is set to "Off" and AV MODE is set to "DYNAMIC (Fixed)". Picture Reset and Feature Demo can be set. Picture Reset: AV MODE will be set to "DYNAMIC (Fixed)" regardless of whether Picture Reset is "On" or "Off". If you select "On", AV MODE will be reset to "DYNAMIC (Fixed)" if there is no operation for 30 minutes. When "Off" is selected, AV MODE will be set to "DYNAMIC (Fixed)". Feature Demo: When "On" is selected, after all the settings are completed, the Feature Demo screen is displayed if there is no operation for several minutes. • ENERGY STAR qualification is based on AV MODE "STANDARD". Air/Cable: Make sure what kind of connection is made with your TV when selecting "Air" or "Cable". CH Search: Channel auto search makes the TV look for all channels viewable in the set area. • See "Initial Setup" on page 14 for setting each item. • If no channel is found, confirm the type of connection made with your TV and try EZ Setup again. 23