Sharp LC32E67U LC-32E67U Operation Manual - Page 37

Using AQUOS LINK AQUOS LINK Setup 1 Press MENU to display the MENU screen, and then press c/d to select "Option". 2 Press a/b to select "AQUOS LINK Setup", and then press ENTER. 3 Press a/b to select a specific item, and then press ENTER. 4 Press a/b (or c/d ) to select the desired setting, and then press ENTER. 5 Press MENU to exit. AQUOS LINK Control Select AQUOS LINK Control to disable AQUOS LINK function even when an AQUOS LINK-compatible HDMI device is connected to the TV. This function prevents the device from starting to operate unexpectedly. Enable: You can operate AQUOS LINK-compatible equipment. Disable: AQUOS LINK function does not work. AQUOS LINK Control Auto Power On Selecting Recorder Enable Disable Auto Power On If this is activated, the One Touch Play function is enabled. Yes: While the TV is in standby mode, it automatically turns on and plays back the image from the HDMI source. No: This function does not work. AQUOS LINK Control Auto Power On Selecting Recorder Yes No Selecting Recorder When multiple AQUOS LINK-compatible devices are connected, this function allows you to set the recorder for recording when you press REC on the TV's remote control unit. Press a/b to select the recorder for recording. Example AQUOS LINK Control Auto Power On Selecting Recorder Input INPUT5 Location [1.0.0.0] INPUT6 [2.0.0.0] Example : when connecting AQUOS LINK-compatible recorder via AQUOS LINK-compatible Audio system AQUOS LINK Control Auto Power On Selecting Recorder Input INPUT5 Location [1.0.0.0] INPUT5 5WD [1.1.0.0] INPUT6 [2.0.0.0] When an AQUOS LINK-compatible audio system or other equipment is connected between the TV and recorder, "Sub" is displayed. One Touch Recording This function allows easy one-touch recording of the program being viewed on the TV to AQUOS LINKcompatible equipment with a recording function by simply pressing REC on the remote control. Prepare the connected AQUOS LINK-compatible recorder for recording. Check the following items. • Make sure that the antenna cable is connected. • Check that there is sufficient available space on the recording media (HDD, DVD, etc.). • On the TV, use "AQUOS LINK Setup" and "Selecting Recorder" to select the equipment for recording. • By default, the recorder connected to INPUT 5 is selected for recording. 1 Press REC to start recording. • When you are viewing a broadcast received with the AQUOS LINK-compatible recorder selected in "Selecting Recorder", recording to the AQUOS recorder of the broadcast being viewed starts. • When you are viewing a broadcast received with equipment other than the AQUOS LINK-compatible recorder selected in "Selecting Recorder" or other external input equipment, pressing REC on the remote control does not start recording. 2 Press REC STOP to stop recording. 35