Sharp LC42BT10U LC42BT10U Operation Manual

Sharp LC42BT10U - 42" LCD TV Manual

Get Sharp LC42BT10U - 42inch LCD TV PDF manuals and user guides View all Sharp LC42BT10U manuals
Add to My Manuals
Save this manual to your list of manuals

Sharp LC42BT10U manual content summary:

  • Sharp LC42BT10U | LC42BT10U Operation Manual - Page 1
    FRANÇAIS ESPAÑOL LC-42BT10U LIQUID CRYSTAL TELEVISION TÉLÉVISEUR ACL TELEVISOR CON PANTALLA DE CRISTAL LÍQUIDO OPERATION MANUAL MODE D'EMPLOI MANUAL DE OPERACIÓN IMPORTANT: Please read this operation manual before starting operating the equipment. IMPORTANTE: Lea este manual de operación antes de
  • Sharp LC42BT10U | LC42BT10U Operation Manual - Page 2
    LC-42BT10U LIQUID CRYSTAL TELEVISION ENGLISH OPERATION MANUAL • The illustrations and on-screen displays in this operation manual TV's model and serial numbers in the space provided. The numbers are located at the rear of the TV USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE
  • Sharp LC42BT10U | LC42BT10U Operation Manual - Page 3
    STAND, TRIPOD, BRACKET, OR TABLE RECOMMENDED BY THE MANUFACTURER OR SOLD WITH THE PRODUCT. FOLLOW THE MANUFACTURER'S INSTRUCTIONS WHEN INSTALLING THE PRODUCT AND USE MOUNTING ACCESSORIES OF CONFORMITY: SHARP LIQUID CRYSTAL TELEVISION, MODEL LC-42BT10U This device complies with Part 15 of the
  • Sharp LC42BT10U | LC42BT10U Operation Manual - Page 4
    , and f) When the product exhibits a distinct change in performance - this indicates a need for service. 19) Replacement Parts-When replacement parts are required, be sure the service technician has used replacement parts specified by the manufacturer or have the same characteristics as the original
  • Sharp LC42BT10U | LC42BT10U Operation Manual - Page 5
    IMPORTANT SAFETY INSTRUCTIONS • Water and Moisture - Do not use this product near water - for example, near a bath tub, wash bowl, kitchen sink, or laundry tub; in a wet basement; or near a swimming pool; and the like. • Stand - Do not place the product on an unstable cart, stand, tripod or table.
  • Sharp LC42BT10U | LC42BT10U Operation Manual - Page 6
    SAFETY INSTRUCTIONS • information with regard to proper grounding of the mast and supporting structure, grounding of the lead-in wire to an CLAMPS POWER SERVICE GROUNDING ELECTRODE SYSTEM (NEC ART 250, PART H) • To prevent fire, never place any type of candle or flames on the top or near the TV set.
  • Sharp LC42BT10U | LC42BT10U Operation Manual - Page 7
    that results in accident or injury. Using a SHARP recommended bracket to mount the TV • You can ask a qualified service professional about using a SHARP recommended AN-37AG2 bracket to mount the TV to the wall. • Carefully read the instructions that come with the bracket before beginning work
  • Sharp LC42BT10U | LC42BT10U Operation Manual - Page 8
    rst time. A) Press POWER on AQUOS television. POWER B) POWER indicator on the front of the AQUOS television lights GREEN. AC outlet • Place the TV close to the AC outlet, and keep the power plug within reach. NOTE • TO PREVENT RISK OF ELECTRIC SHOCK, DO NOT TOUCH UN-INSULATED PARTS OF ANY CABLES
  • Sharp LC42BT10U | LC42BT10U Operation Manual - Page 9
    . Be sure to follow the instructions below. • Do not mix TV POWER on the remote control to turn the power on. IMPORTANT: IF THE UNIT DOES NOT POWER ON - UNPLUG THE AQUOS TELEVISION FROM THE OUTLET AND REPEAT THE INSTALLATION STEPS. IF YOU STILL ENCOUNTER NO POWER, PLEASE CONTACT US AT 1-800-BE-SHARP
  • Sharp LC42BT10U | LC42BT10U Operation Manual - Page 10
    On-Screen Display 21 Menu items for TV/INPUT 1/2/3 Troubleshooting 52 Troubleshooting-Digital broadcasting 52 RS-232C port specifications 53 Specifications 55 SHARP recommended accessory 55 Calling for Service 57 LIMITED WARRANTY 57 Dimensional drawings • The dimensional drawings for the LCD TV
  • Sharp LC42BT10U | LC42BT10U Operation Manual - Page 11
    page 16 for TV status indicator. TV (Rear/Top) HDMI terminal (INPUT 5) HDMI terminal (INPUT 4) DVI-I terminal (INPUT 6) DIGITAL AUDIO OUTPUT terminal Antenna/Cable in AUDIO terminal (INPUT 6) AUDIO terminals (INPUT 4) INPUT 3 terminals OPC indicator** SLEEP indicator** POWER indicator** Channel
  • Sharp LC42BT10U | LC42BT10U Operation Manual - Page 12
    7 INPUT: Select a TV input source. (TV, INPUT 1, INPUT 2, INPUT 3, INPUT 4, INPUT 5, INPUT 6) (See pages 30 to 32.) 8 VOL k/l: Set the volume. (See page 19.) 16 9 SURROUND: Select Surround settings. (See page 19.) 10 FREEZE: Set the still image. Press again to return to normal screen. (See
  • Sharp LC42BT10U | LC42BT10U Operation Manual - Page 13
    VHF/ UHF antenna or 75-ohm coaxial cable (round) Home Antenna terminal (75-ohm) Coaxial cable (commercially available) • Connect the antenna cable to the TV using one of the methods in the illustration as shown (1, 2, 3 or 4). 300-ohm twin-lead cable (flat) 4 Separate VHF/ UHF antenna VHF UHF
  • Sharp LC42BT10U | LC42BT10U Operation Manual - Page 14
    . To view external source images, select the input source from INPUT on the remote control unit or on the TV. (See pages 30 to 32.) CAUTION • To protect equipment, always turn off the TV before connecting any external equipment. • Please read the relevant operation manual (Blu-ray disc player
  • Sharp LC42BT10U | LC42BT10U Operation Manual - Page 15
    HDMI equipment. HDMI equipment HDMI cable (commercially available) NOTE • When using an HDMI-DVI conversion cable, input the audio signal to AUDIO terminal of INPUT 4. • To enjoy the AQUOS 1080p display capability, connect your Blu-ray disc player, HD-DVD player or other external equipment using an
  • Sharp LC42BT10U | LC42BT10U Operation Manual - Page 16
    connecting the TV to a PC with a DVI terminal, use a DVI cable (commercially available) instead of a RGB/DVI conversion cable. PC compatibility chart It is necessary to set the PC format correctly to display XGA and WXGA signal. Refer to page 39 to set PC input signals. PC Resolution 720 x 400
  • Sharp LC42BT10U | LC42BT10U Operation Manual - Page 17
    from the Setup menu. POWER indicator OPC indicator SLEEP indicator TV POWER (On/Standby) Turning off the power Press POWER on the TV, or TV POWER on the remote control unit. • The TV enters standby and the image on the screen disappears. • The POWER indicator on the TV turns off. NOTE • If
  • Sharp LC42BT10U | LC42BT10U Operation Manual - Page 18
    press TV POWER on the remote control unit. 1. Insert the batteries into the remote control unit. (See page 8.) 2. Connect the antenna cable to the TV. ( Spanish. 1 Press a/b to select the desired language listed on the screen, and then press ENTER. Language Air/Cable CH Search English Français
  • Sharp LC42BT10U | LC42BT10U Operation Manual - Page 19
    . Method 1 Using CH r/s on the remote control unit or on the TV. Method 2 1 Press FLASHBACK to switch to the previously tuned channel. channel. NOTE • FLASHBACK will not work if no channel has been changed after the TV is turned on. Method 3 Using remote control buttons 0-9, • (DOT) to select
  • Sharp LC42BT10U | LC42BT10U Operation Manual - Page 20
    changing volume/sound ■ Changing the volume You can change the volume on the TV or on the remote control unit. ■ Using MUTE on the remote control unit Mutes the current sound output. Press MUTE. • M will be displayed on the screen for 30 minutes, and the sound is silenced. 20 Mute ■ Using VOLk
  • Sharp LC42BT10U | LC42BT10U Operation Manual - Page 21
    other information. (SAP is mono sound.) If stereo sound is difficult to hear. • Obtain a clearer sound by manually switching to fixed mono-sound mode. NOTE • MTS only operates while in TV mode. You can change MTS as shown below to match the television broadcast signal. Press AUDIO to toggle between
  • Sharp LC42BT10U | LC42BT10U Operation Manual - Page 22
    input modes, but the operating procedures are the same. • The screens in the operation manual are for explanation purposes (some are enlarged, others cropped) and may vary slightly from the actual screens. : Select ENTER : Enter RETURN : Back MENU : Exit The bar above is an operational guide
  • Sharp LC42BT10U | LC42BT10U Operation Manual - Page 23
    28 Balance Page 28 Surround Page 28 Reset Page 28 Power Control No Signal Off Page 29 No Operation Off Page 29 Setup EZ Setup Page 23 CH Setup Page 23 Antenna Setup-DIGITAL Page 24 Input Skip Page 32 Input Label Page 35 Parental CTRL Pages 42-47 Position Page 34 Language Page 34
  • Sharp LC42BT10U | LC42BT10U Operation Manual - Page 24
    instructions below to manually memorize the channels. Antenna setting 1 Press MENU to display the MENU screen, and then press c/d to select "Setup". 2 Press a/b to select "CH Setup", and then press ENTER. • If you already set the Secret No., input the 4-digit secret number here. See page 42 TV
  • Sharp LC42BT10U | LC42BT10U Operation Manual - Page 25
    screen, and then press c/d to select "Setup". 2 Press a/b to select "CH Setup", and then press ENTER. • If you already set the Secret No., input the 4-digit secret number here. See page 42 • Make sure what kind of connection is made with your TV. 3 Press a/b to select "Signal Strength". • The
  • Sharp LC42BT10U | LC42BT10U Operation Manual - Page 26
    select the channel you want to delete, and then press ENTER. Deleting a favorite channel 1 Repeat steps 2 and 3 in Using Favorite CH on the menu screen. 2 Press a/b to select "1 Data Clear", and then press ENTER. • To delete all the favorite channels, select "All Data Clear", and then skip to
  • Sharp LC42BT10U | LC42BT10U Operation Manual - Page 27
    all Picture adjustment items to the factory preset values, press a/b to select "Reset", press ENTER, press c/d to select "Yes", and then press ENTER. OPC setting Automatically adjusts the brightness of the screen. 1 Press MENU to display the MENU screen, and then press c/d to select "Picture
  • Sharp LC42BT10U | LC42BT10U Operation Manual - Page 28
    picture adjustments This TV provides various advanced functions for optimizing the picture quality. 1 Press MENU to display the MENU screen, and then press Normal adjustment Fast For moving images Slow For still images NOTE • 3D-Y/C is available for input signal from Composite Video and
  • Sharp LC42BT10U | LC42BT10U Operation Manual - Page 29
    "Surround", and then press ENTER. Audio Power Control 1 Press MENU to display the MENU screen, and then press c/d to select "Audio". Audio Power Control Treble [ 0] a15 b15 Bass [ 0] a15 b15 Balance [ 0] L R Surround [Off] Reset 2 Press a/b to select a specific adjustment item
  • Sharp LC42BT10U | LC42BT10U Operation Manual - Page 30
    MENU to display the MENU screen, and then press c/d to select "Power Control". 2 Press a/b INPUT terminal is connected to the DIGITAL AUDIO OUTPUT terminal on the TV factory preset value. • When a TV program finishes, this function may not operate. No operation off When set to "Enable", the power
  • Sharp LC42BT10U | LC42BT10U Operation Manual - Page 31
    manual for the INPUT6 signal type. • If you set INPUT 1 or 2 to Auto, the TV will automatically select the input signal. 2 Press INPUT again to select the input source. • Setting INPUT 1 or 2 signal selection to "Auto" when other equipment is connected will result in the following • An image
  • Sharp LC42BT10U | LC42BT10U Operation Manual - Page 32
    Using external equipment DVI input signal setting (INPUT 6) 1 Press INPUT to select INPUT 6. INPUT SOURCE TV INPUT1 INPUT2 INPUT3 INPUT4 INPUT5 INPUT6 2 Press MENU to display the MENU screen, and then press c/d to select "Option". 3 Press a/b to select "Input Select", and then press
  • Sharp LC42BT10U | LC42BT10U Operation Manual - Page 33
    TV. INPUT SOURCE TV INPUT1 INPUT2 INPUT3 INPUT4 INPUT5 INPUT6 Input Skip This setting allows you to skip the HDMI or DVI Input on the Input Selection operation. 1 Press MENU to display the MENU screen NOTE • Refer to your external equipment operation manual for the signal type. • "Signal Type"
  • Sharp LC42BT10U | LC42BT10U Operation Manual - Page 34
    . Fine Sync. adjustment (for DVI input mode only) Ordinarily you can easily adjust the picture as necessary to change image position using Auto Sync. In some cases, however, manual adjustment is needed to optimize the image. 1 Press MENU to display the MENU screen, and then press c/d to select
  • Sharp LC42BT10U | LC42BT10U Operation Manual - Page 35
    c/d to select "Setup". 2 Press a/b to select "Reset", and then press ENTER. • If you already set the Secret No., input the 4-digit secret number here. See page 42 for setting a secret number. • "Return to the factory preset values" displays on the screen. 3 Press c/d to select "Yes", and then
  • Sharp LC42BT10U | LC42BT10U Operation Manual - Page 36
    INPUT to select the desired input source. 2 Press MENU to display the MENU screen, and then press c/d to select "Setup". 3 Press a/b to select "Input 60 4 Press a/b/c/d to select the new name for the input mode, and then press ENTER. 120 90 Example INPUT SOURCE TV DVD NOTE • Select "Off" by
  • Sharp LC42BT10U | LC42BT10U Operation Manual - Page 37
    thin black bands at the top and bottom of the screen. Dot by Dot (1080i/p only): Detects the resolution of the signal and displays an image with the same number of pixels on the screen. Full Screen (720p only): You can select "Full Screen" only when receiving a 720p signal. S.Stretch (Smart stretch
  • Sharp LC42BT10U | LC42BT10U Operation Manual - Page 38
    of the signal and screen display. top and bottom of the displays an image image is cropped. with the same number of pixels on the screen. Input signal 16:9 Stretch Dot by Dot An image fully fills the screen. Detects the resolution of the signal and displays an image with the same number
  • Sharp LC42BT10U | LC42BT10U Operation Manual - Page 39
    output without screen image. Both screen images and audio are output. NOTE • The screen image will return the remote control unit or VOLl/k on the TV. • Sound via the AUDIO OUTPUT terminal is System" can only be set for the INPUT 1/2 VIDEO and INPUT 3. Program Title Display Select the CH display
  • Sharp LC42BT10U | LC42BT10U Operation Manual - Page 40
    on the screen disappears. • The mode changes as shown below. When the input source is TV, INPUT 1, 2 or 3 terminals (Example) AV MODE: STANDARD AV MODE: MOVIE AV MODE: DYNAMIC AV MODE: GAME AV MODE: DYNAMIC (Fixed) AV MODE: USER [TV] When the input source is INPUT 4, 5 or 6 terminals
  • Sharp LC42BT10U | LC42BT10U Operation Manual - Page 41
    . Digital Closed Caption service is a new caption service available only on digital TV programs (also at the discretion of the service provider). It is Caption information is still on the screen. • Press repeatedly until you select the desired closed caption service. Air ANALOG 2 Audio : MONO
  • Sharp LC42BT10U | LC42BT10U Operation Manual - Page 42
    allows you to adjust the closed caption screen appearance to suit your preference. 1 Press MENU to display the MENU screen, and then press c/d to select " the desired parameter. NOTE • For resetting adjustments to the factory preset values, press a/b to select "Reset", and then press ENTER. •
  • Sharp LC42BT10U | LC42BT10U Operation Manual - Page 43
    : Three conditions must be met to enable the V-Chip (see pages 42 to 47): 5 Input the same 4-digit number on the "Reconfirm" screen as in step 4 to confirm. New Secret No. Secret No. Clear Input Secret No. aaaa New Secret No. Reconfirm **** aaaa 1 Secret No. is registered. 2 V-Chip/V-Chip (DTV
  • Sharp LC42BT10U | LC42BT10U Operation Manual - Page 44
    No. 6 Press MENU to exit. Secret No. Clear Input Secret No. aaaa NOTE New Secret No. Reconfirm aaaa aaaa 7 Input the same 4-digit number on the "Reconfirm" screen as in step 6 to confirm. • See page 42 for re-registering a new secret number after being cleared. • As a precautionary measure
  • Sharp LC42BT10U | LC42BT10U Operation Manual - Page 45
    is an electronic filtering device built into your TV. This tool 42 for Secret number setting for parental control.) • The U.S. has two rating systems for viewing content: TV Parental Guidelines and movie ratings. • The TV Parental Guidelines work in conjunction with the V-CHIP to help parents screen
  • Sharp LC42BT10U | LC42BT10U Operation Manual - Page 46
    menu if you do not first configure your secret number. (See page 42.) 3 Input the 4-digit secret number by using 0-9. 4 Press a/b to select "V-Chip", and are set. Example MPAA TV Guidelines Can. English Ratings Can. French Ratings TV-Y TV-Y7 D TV-G L TV-PG S TV-14 V TV-MA FV NONE •
  • Sharp LC42BT10U | LC42BT10U Operation Manual - Page 47
    Useful adjustment settings Canadian Rating Systems • The TV rating systems in Canada are based on the Canadian conflict; nor encourage children to imitate dangerous acts which they may see on the screen. General: Considered acceptable for all age groups. Appropriate viewing for the entire family,
  • Sharp LC42BT10U | LC42BT10U Operation Manual - Page 48
    If Status is not set to "On", the configuration settings will not work. (See page 42.) 2 Input the 4-digit secret number by using 0- 9. At this time V-CHIP BLOCK temporarily Example releases. MPAA TV Guidelines Can. English Ratings Can. French Ratings 7 Press MENU to exit. E C C8+ G PG 14+ 18
  • Sharp LC42BT10U | LC42BT10U Operation Manual - Page 49
    is captured. 2 Press FREEZE again to cancel the function. NOTE • When this function is not available, "No displaying still image available." will display. • The still image automatically goes out after 30 minutes. • If you are using the freeze function and a broadcast activates the V-CHIP BLOCK
  • Sharp LC42BT10U | LC42BT10U Operation Manual - Page 50
    Other viewing options Manufacturer codes VCR BRAND REMOTE CONTROL CODE NUMBER DVD/LD BRAND REMOTE CONTROL CODE NUMBER CATV/SAT BRAND REMOTE CONTROL CODE NUMBER NOTE • Numbers marked with * are SAT codes, all others are CATV codes. AUDIO BRAND REMOTE CONTROL CODE NUMBER 49
  • Sharp LC42BT10U | LC42BT10U Operation Manual - Page 51
    cable converter power on and off. 2 0-9, • (DOT) Press a button (or buttons) that corresponds to the channel that you wish to watch. 3 ENTER, a/b/c/d 2 ENTER: Press to activate the selected function. a/b/c/d: Press the button to select items on the SAT GUIDE screen or SAT MENU screen. NOTE
  • Sharp LC42BT10U | LC42BT10U Operation Manual - Page 52
    the input connected to the VCR is selected. The following 1 to 8 can be used to control the VCR. 1 CH r/s Press to select the channel of the TV tuner on the VCR. 2 SOURCE POWER Turns the power of button to select items on the DVD MENU screen. 9 J Hold down to fast forward. 10 I Starts playback. 51
  • Sharp LC42BT10U | LC42BT10U Operation Manual - Page 53
    Appendix Troubleshooting Problem Possible Solution • No power • Check if you pressed TV POWER on the remote control unit. (See page 16.) If the indicator on the TV does not light up, press POWER on the TV. • Is the AC cord disconnected? (See page 7.) • Has the power been turned on? (See page 16
  • Sharp LC42BT10U | LC42BT10U Operation Manual - Page 54
    commands from the PC via the RS-232C connector. The TV operates according to the received command and sends a response message input for the parameter.) When the input parameter is not within an adjustable range, "ERR" returns. (Refer to "Response code format".) Any numerical value can replace
  • Sharp LC42BT10U | LC42BT10U Operation Manual - Page 55
    (0DH) Problem response (communication error or incorrect command) ERR Return code (0DH) Command table • Commands not indicated here are not guaranteed to operate. CONTROL ITEM COMMAND PARAMETER POWER SETTING P O W R 0 _ _ _ Power Off INPUT SELECTION A TOGGLE I T G D x _ _ _ (Toggle) TV
  • Sharp LC42BT10U | LC42BT10U Operation Manual - Page 56
    Appendix Specifications Item LCD panel Number of dots Model: LC-42BT10U 42o Advanced Super View & BLACK TFT LCD (Actual screen size 42 1/64o measured diagonally) 6,220,800 dots (1920 g 1080 g 3 dots) TV-standard (CCIR) American TV Standard ATSC/NTSC System TV Function Receiving Channel VHF/
  • Sharp LC42BT10U | LC42BT10U Operation Manual - Page 57
    select "EZ Setup", "CH Setup", "Parental CTRL" or "Reset", and the Secret number input screen displays. Setup Secret No. Option aaaa 3 Press and hold both CHr and VOLk on the TV simultaneously until the message appears on the screen. The secret number is . NOTE • As a precautionary measure
  • Sharp LC42BT10U | LC42BT10U Operation Manual - Page 58
    not apply. Model Specific Section (On-Site Service) Your Product Model Number & Description: Warranty Period for this Product: Additional Exclusions: LC-42BT10U LCD Color Television (Be sure to have this information available when you need service for your Product.) Three (3) years parts and labor
  • Sharp LC42BT10U | LC42BT10U Operation Manual - Page 59
    58
  • Sharp LC42BT10U | LC42BT10U Operation Manual - Page 60
    77/8 (200) 23 3 / 6 4 (85) 2637/64 (675) Dimensional drawings 4019/32 (1031) 3647/64 (933.0) 77/8 (200) 2023/32 (526.0) 1637/64 (421) Unit: inch/(mm) 59/32 (134)
  • Sharp LC42BT10U | LC42BT10U Operation Manual - Page 61
    SHARP ELECTRONICS CORPORATION Sharp Plaza, Mahwah, New Jersey 07430-2135 SHARP CORPORATION Printed in Mexico Imprimé au Mexique Impreso en México TINS-D213WJZZ 07P06-MX-NG
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
IMPORTANT:
Please read this operation manual before
starting operating the equipment.
IMPORTANTE: Lea este manual de operación antes de
comenzar a operar el equipo.
LC-42BT10U
LIQUID CRYSTAL TELEVISION
TÉLÉVISEUR ACL
TELEVISOR CON PANTALLA
DE CRISTAL LÍQUIDO
ENGLISH
FRAN
Ç
AIS
ESPAÑOL
OPERATION MANUAL
MODE D'EMPLOI
MANUAL DE OPERACIÓN